Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 4903 for “"Full-Scale"”.

  1. Wind effects on a full-scale frame

    … The pressure coefficients obtained from model scale testing of WERFL at UWO boundary layer wind tunnel are combined with the influence coefficients to obtain the desired load effects. This has been enabled through MATLAB programs developed for this research. The marginal relative frequency …

    ttu Repository record for Wind effects on a full-scale frame (opens in a new tab)

  2. Full Scale Evaluation of Organic Soil Mixing

    … This thesis extends this concept to the bench scale testing of multiple full scale field studies. This thesis will conclude with the presentation of new threshold curves based on the new data from the added field case studies. Given that there were variable binders and soil types used in the …

    usf Repository record for Full Scale Evaluation of Organic Soil Mixing (opens in a new tab)

  3. Seismic performance of full-scale reinforced concrete columns

    … capacity of reinforced concrete columns. Five full-scale reinforced concrete columns were tested at The University of Texas at Austin. Test results indicated that the shear span-to-depth ratio and axial load level were important parameters influencing the relationship among various ductility …

    texas Repository record for Seismic performance of full-scale reinforced concrete columns (opens in a new tab)

  4. Simulation of Full-Scale Pressure Retarded Osmosis Processes

    … of a PRO process simulator for a bench scale and plant scale simulation. For bench scale simulation, this work takes into account the effect of internal concentration polarization (ICP), external concentration polarization (ECP) and reverse solute flux that occurs in the membrane. The …

    tamu Repository record for Simulation of Full-Scale Pressure Retarded Osmosis Processes (opens in a new tab)

  5. Testing of a full-scale mass timber diaphragm

    … of the U.S. One sub-assembly that has not been fully investigated are horizontal diaphragms for floors, roofs, or bridge decks. This thesis aims to test a single large scale CLT cantilever diaphragm subjected to a simulated seismic load. Data was collected and the behavior of the diaphragm …

    colostate Repository record for Testing of a full-scale mass timber diaphragm (opens in a new tab)

  6. Full Scale Test Case For Sailing Yacht Performance

    … investigates the possibilities of producing a full scale test case of the performance of sailing yachts. With such a test case, it is believed that instantaneous and absolute performance of sailing yacht evolving in real conditions can be investigated. An out-put of this study is the ability to …

    chalmers Repository record for Full Scale Test Case For Sailing Yacht Performance (opens in a new tab)

  7. EXAMINING APPLICABILITY OF FULL SCALE 3D PRINTING IN ARCHITECTURE

    This research paper examines the applicability full scale 3D printed architecture. With the introduction of Computer Aided Data (CAD) and digital fabrication in the construction industry, new design paradigms and methodologies have opened up for architects and designers. Using 3D printing …

    nus Repository record for EXAMINING APPLICABILITY OF FULL SCALE 3D PRINTING IN ARCHITECTURE (opens in a new tab)

  8. Hydrologic characterization of two full-scale waste rock piles

    Waste stockpiles pose an environmental risk for leaching of metals and low pH water long after a mine has stopped operations. To determine the potential for acid generation in waste materials a clear understanding of flow through the waste rock piles is required. Based on field and laboratory …

    ubc Repository record for Hydrologic characterization of two full-scale waste rock piles (opens in a new tab) Download PDF for Hydrologic characterization of two full-scale waste rock piles (opens in a new tab)

  9. Mould Resistance of Full Scale Wood Frame Wall Assemblies

    … which include the sheathing and framing within full scale wall assemblies. Secondary objectives were to investigate the difference in mould growth resistance between borate-treated and untreated wood products as well as provide information about mould growth under different temperature and …

    waterloo Repository record for Mould Resistance of Full Scale Wood Frame Wall Assemblies (opens in a new tab)

  10. Measuring Smoke Evolution at Full-Scale with Video Recordings

    … method of measurement in intermediate- and full-scale fire experiments is a subjective method wherein observers visually estimate the time the smoke layer takes to reach objects of known height in video recordings. Alternative methods for estimating smoke layer height require expensive …

    waterloo Repository record for Measuring Smoke Evolution at Full-Scale with Video Recordings (opens in a new tab)

  11. Laterally loaded drilled shafts from full scale field tests

    … shafts response to lateral loading by conducting full-scale field tests. Twenty-five drilled shafts were constructed at two sites in Missouri as part of a previous �geotechnical thrust� research program. In order to measure the response of the foundations to static lateral loading, sixteen …

    missouri Repository record for Laterally loaded drilled shafts from full scale field tests (opens in a new tab)

  12. Numerical modeling of full scale limited ventilation fire tests

    … combustion model in FDS version 5 by simulating full scale fire tests in an apartment setting with realistic furniture items using heat release rate data from furniture calorimeter and load cell. The extinction model provides a more accurate representation of the fire behavior in the compartment …

    maryland Repository record for Numerical modeling of full scale limited ventilation fire tests (opens in a new tab)

  13. Column-Supported Embankments: Full-Scale Tests and Design Recommendations

    When an embankment is to be constructed over ground that is too soft or compressible to adequately support the embankment, columns of strong material can be placed in the soft ground to provide the necessary support by transferring the embankment load to a firm stratum. This technology is known as …

    vt Repository record for Column-Supported Embankments: Full-Scale Tests and Design Recommendations (opens in a new tab)

Page 1 of 246