Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 408 for “"Fused Deposition Modeling"”.

  1. Výroba montážních přípravků pomocí metody Fused Deposition Modeling

    Bakalářská práce se zabývá návrhem a výrobou montážních přípravků pro výrobu LCD televizorů ve firmě Wistron Infocomm (Czech), s. r. o. V rámci práce proběhlo zhodnocení současného stavu používání montážních přípravků a následný návrh a tvorba prototypů dvou montážních přípravků. Do práce je …

    brno-tech Repository record for Výroba montážních přípravků pomocí metody Fused Deposition Modeling (opens in a new tab)

  2. Využití metody Fused Deposition Modeling pro lékařské účely

    … kloubu na 3D tiskárně uPrint s využitím metody Fused Deposition Modeling a zabývá se také hodnocením nákladů na výrobu 3D modelů pomocí metody Fused Deposition Modeling ve srovnání s jinými dostupnými technologiemi.

    brno-tech Repository record for Využití metody Fused Deposition Modeling pro lékařské účely (opens in a new tab)

  3. Multiple Independent Extrusion Heads for Fused Deposition Modeling

    Fused Deposition Modeling is a rapid prototyping technique in which miniature extruders melt filaments of polymeric materials. The extruder is mounted to an X/Y stage, and a computer controls the machine so that the polymer is deposited in only the appropriate locations. Material is deposited on …

    vt Repository record for Multiple Independent Extrusion Heads for Fused Deposition Modeling (opens in a new tab)

  4. Výroba převodové skříně osobního automobilu metodou Fused Deposition Modeling

    … provedena technologií Rapid Prototyping, metodou Fused Deposition Modeling na zařízení uPrint z ABSplus materiálu pro účel vizualizace. Konečnou verifikací bylo sestavení jednotlivých dílů převodové skříně včetně zajištění její funkčnosti.

    brno-tech Repository record for Výroba převodové skříně osobního automobilu metodou Fused Deposition Modeling (opens in a new tab)

  5. Multivariable Investigation Of Fused Deposition Modeling For Recycled Polylactic Acid

    The growing issue of global plastic pollution creates an impetus to innovate processes that address this challenge. This research investigates the integration of a near-zero waste manufacturing process with mechanical recycling, in which 3D printed parts are ground and re-extruded into filament for …

    umn Repository record for Multivariable Investigation Of Fused Deposition Modeling For Recycled Polylactic Acid (opens in a new tab)

  6. Constitutive modeling of fused deposition modeling acrylonitrile butadiene styrene (ABS)

    Fused deposition modeling is a rapid prototyping process that is widely used to create prototypes. Acrylonitrile butadiene styrene is the most widely used material for fused deposition modeling. The parts are fabricated in a layer by layer fashion and the individual layers are composed of fibers …

    tamu Repository record for Constitutive modeling of fused deposition modeling acrylonitrile butadiene styrene (ABS) (opens in a new tab)

  7. Lidocaine Mucoadhesive Film Fabrication Using Fused Deposition Modeling 3D Printing

    … The extrudate filaments were then fed into a fused deposition modelling (FDM) printer to fabricate mucoadhesive films meant to buccal applications to manage local pain within the oral cavity that requires the intervention with local anesthetics. The printed films drug content was determined …

    mississippi Repository record for Lidocaine Mucoadhesive Film Fabrication Using Fused Deposition Modeling 3D Printing (opens in a new tab)

  8. Thermal Modeling of Fused Deposition Modeling Process Using Discrete Elements

    … proposed to predict the material behavior during fused deposition modeling (FDM) process. FDM produced components show anisotropic material properties as compared to the virgin materials produced via injection molding. The thermal phenomena subjected to the filament during the FDM process leads to …

    clemson Repository record for Thermal Modeling of Fused Deposition Modeling Process Using Discrete Elements (opens in a new tab)

  9. PHYSICAL PROPERTY STUDIES OF FUSED DEPOSITION MODELING SHAPED CHARGE LINERS

    … stearic acid, paraffin wax filament with a Fused Deposition Modeling (FDM) printer. Variation in both chemical debinder temperature and sintering cycles (temperature, ramp rate, and dwell time) enabled densities to reach 88% of theoretical maximum density (TMD) for copper. Material physical …

    nps Repository record for PHYSICAL PROPERTY STUDIES OF FUSED DEPOSITION MODELING SHAPED CHARGE LINERS (opens in a new tab)

  10. Výroba prototypového přípravku s využitím aditivní metody Fused Deposition Modeling

    … 3D tlačiarni uPrint, s využitím aditívnej metódy Fused Deposition Modeling. V závere práce bola zhodnotená výroba prípravku a taktiež porovnanie nákladov pri využití alternatívnych materiálov.

    brno-tech Repository record for Výroba prototypového přípravku s využitím aditivní metody Fused Deposition Modeling (opens in a new tab)

  11. Realizace 3D modelu spalovacího motoru aditivní metodou Fused Deposition Modeling

    … na 3D tiskárně uPrint využívající technologie Fused Deposition Modeling. Závěr práce tvoří diskuzi o vzniklých problémech během tvorby části sestavy modelu spalovacího motoru.

    brno-tech Repository record for Realizace 3D modelu spalovacího motoru aditivní metodou Fused Deposition Modeling (opens in a new tab)

  12. Quantifying a Fused Deposition Modeling System’s Dimensional Performance Through Its Addressability

    … parameters to be significant when operating a fused deposition modeling system and will impact the part being produced. Therefore, this work expands upon previous parametric studies and demonstrates to the additive manufacturing industry the importance of characterizing the operating …

    rit Repository record for Quantifying a Fused Deposition Modeling System’s Dimensional Performance Through Its Addressability (opens in a new tab)

  13. Design of Self-supported 3D Printed Parts for Fused Deposition Modeling

    … is needed to produce high quality parts by Fused Depositing Modeling (FDM). An example for a chamfer angle, is the common use of 45 degree angle in the AM process. Surfaces that are more flat show defects than inclined surfaces, and therefore a numerical model is needed. The model can …

    iupui Repository record for Design of Self-supported 3D Printed Parts for Fused Deposition Modeling (opens in a new tab)

  14. Characterization of mechanical properties of fused deposition modeling manufactured polycarbonate composites

    … polycarbonate composites manufactured by the Fused Deposition Modeling (FDM) method. The approach comprises of tensile testing of FDM manufactured samples following the ASTM D 638-03 and ASTM D 3039-00 standards. This gives the mechanical properties of either individual polycarbonate fibers or …

    missouri Repository record for Characterization of mechanical properties of fused deposition modeling manufactured polycarbonate composites (opens in a new tab)

  15. Towards Multi-Objective Optimization of Process Parameters in Fused Deposition Modeling

    Fused Deposition Modeling (FDM) offers transformative advantages in manufacturing yet consistently faces a significant challenge: simultaneously optimizing for mechanical performance, surface quality, productivity, and cost. Traditional optimization methods often address isolated objectives and …

    guelph Repository record for Towards Multi-Objective Optimization of Process Parameters in Fused Deposition Modeling (opens in a new tab)

  16. Low-Cost 3D Printing of Cast Iron Using Fused Deposition Modeling

    Fused deposition modeling (FDM) is an inexpensive metal additive manufacturing technique used for rapid prototyping, batch production, and large-scale manufacturing. This technology is typically used to print thermoplastic filaments and has been adapted to print limited metallic filaments. This …

    guelph Repository record for Low-Cost 3D Printing of Cast Iron Using Fused Deposition Modeling (opens in a new tab)

  17. FAILURE ANALYSIS OF COMPACT FUSED DEPOSITION MODELING SYSTEMS UNDER VIBRATION LOADING

    … arduous conditions. This study uses a compact fused deposition modeling (FDM) system as a surrogate model to represent the full-scale installed 3D printing system. The printer was tested experimentally using a shaker table to excite the system at various random vibration profiles. The dynamic …

    nps Repository record for FAILURE ANALYSIS OF COMPACT FUSED DEPOSITION MODELING SYSTEMS UNDER VIBRATION LOADING (opens in a new tab)

  18. Konstrukce a výroba čepele florbalové hole pomocí metody Fused Deposition Modeling

    Tato práce představuje spojení technologie 3D tisku (Rapid Prototyping) se sportovním odvětvím. Pomocí zmíněné moderní technologie byl vyroben funkční model čepele florbalové hole, jejíž konstrukční návrh vznikl ve 3D parametrickém softwaru Autodesk Inventor. Práce nám přiblíží historii florbalu a …

    brno-tech Repository record for Konstrukce a výroba čepele florbalové hole pomocí metody Fused Deposition Modeling (opens in a new tab)

  19. Aplikace metody Fused Deposition Modeling pro vyhotovení návrhu modelu planetového mechanismu

    … uPrint, jež pro zhotovení využívá metodu Fused Deposition Modeling. Součástí práce je vysvětlení planetového mechanismu po stránce teoretické, praktické a rovněž konstrukční a dále popis metody Fused Deposition Modeling. Model planetového mechanismu a daná bakalářská práce bude dále …

    brno-tech Repository record for Aplikace metody Fused Deposition Modeling pro vyhotovení návrhu modelu planetového mechanismu (opens in a new tab)

  20. Aplikace aditivní metody Fused Deposition Modeling pro výrobu hlavice na zavlažování

    … A602 pracující na principu aditivní metody Fused Deposition Modeling. Charakteristika aditivní technologie Rapid Prototyping, spojená s popisem aditivních materiálů a jejich aplikačním využitím je rovněž součástí práce. V závěru bylo provedeno technicko – ekonomické zhodnocení možností …

    brno-tech Repository record for Aplikace aditivní metody Fused Deposition Modeling pro výrobu hlavice na zavlažování (opens in a new tab)

Page 1 of 21