Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Fusion Bonding"”.

  1. Fusion bonding of reinforced thermoplastic

    A laboratory technique developed to produce fusion joints under carefully controlled conditions is described The technique was used to manufacture single-lap specimens from the reinforced thermoplastic APC-2, and the influence of processing temperature and surface degreasing on joint strength is …

    glasgow Download PDF for Fusion bonding of reinforced thermoplastic (opens in a new tab)

  2. Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction

    … print parts separately and join them together by fusion bonding. PA6/CF dovetail and simple lap joint samples were designed to study the optimal procedure for fusion bonding using Talc Bed Compaction Molding (TBCM), and were tested using mechanical tensile testing processes, comparing tensile …

    odu Repository record for Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction (opens in a new tab)

  3. A high-temperature pressure sensor utilizing linear voltage differential transformer (LVDT) and silicon wafer-to-wafer fusion bonding technologies

    … of TaSi_2. Single-wafer and Wafer-to-Wafer fusion bonding fabrication processes are proposed for making the device. The device operating temperature range is extended above that obtainable with piezoresistive silicon to 6500C, based on theoretical and simulation results. The full-scale …

    njit Repository record for A high-temperature pressure sensor utilizing linear voltage differential transformer (LVDT) and silicon wafer-to-wafer fusion bonding technologies (opens in a new tab)

  4. Investigation of resin infusion consumable effect on fusion bond strength in the manufacture of a thermoplastic vertical axis wind turbine prototype

    … reformed without machining. Thermal welding, or fusion bonding can eliminate the need for adhesive bonding, a requirement in the manufacture of thermoset and thermoplastic turbine blades, as currently being produced. Colorado State University was tasked with using Elium®, a novel liquid poly …

    colostate Repository record for Investigation of resin infusion consumable effect on fusion bond strength in the manufacture of a thermoplastic vertical axis wind turbine prototype (opens in a new tab)

  5. High-Rate Production of Thermoplastic Composite Structures for Urban Air Mobility Vehicles Utilizing Fastener-Free Assembly Methods

    … Another important aspect of the blade is using fusion bonding methods to increase the strength of joints in the product while reducing weight from fasteners and adhesives. This manufacturing process will be validated by producing a physical demonstrator to ascertain the efficacy of the …

    south-carolina Repository record for High-Rate Production of Thermoplastic Composite Structures for Urban Air Mobility Vehicles Utilizing Fastener-Free Assembly Methods (opens in a new tab)

  6. A process simulation framework for continuous resistance welding of thermoplastic composites

    … significant benefit is the ability to implement fusion bonding techniques (welding). Continuous resistance welding (CRW), a promising form of fusion bonding, uses a movable apparatus to incrementally heat sections of a resistive implant placed between parts by imposing electrical current and …

    ubc Repository record for A process simulation framework for continuous resistance welding of thermoplastic composites (opens in a new tab) Download PDF for A process simulation framework for continuous resistance welding of thermoplastic composites (opens in a new tab)

  7. Wafer bonding for fabrication of three-dimensional photonic band gap crystals

    … approach uses alternating steps of wafer fusion bonding, selective substrate etching, and pattern etching to sequentially build up PBG crystals in a layer-by-layer fashion. The wafer fusion technique was utilized to stack up GaAs thin films. To enhance the bonding, a thin (Ga,In)As …

    iastate Repository record for Wafer bonding for fabrication of three-dimensional photonic band gap crystals (opens in a new tab)

  8. Thermoplastic composite sandwiches for structural helicopter applications

    … Skins and core are joined cohesively by fusion bonding, a technique which leads to high bond strengths while being realisable in short cycle times. However, CF/PEEK skins and PEI foam cannot be readily joined due to their incompatible processing requirements, therefore the ‘Thermabond’ …

    bayreuth Repository record for Thermoplastic composite sandwiches for structural helicopter applications (opens in a new tab)

  9. Investigation of the Repairability of Thermoplastic Composite Structures Through Conduction Welding

    … through conduction welding, a cost-effective fusion bonding technique that eliminates the necessity for adhesives or mechanical fasteners in the assembly of composite materials. By applying this method, the repairability of thermoplastic composite samples is assessed through the application of …

    york Repository record for Investigation of the Repairability of Thermoplastic Composite Structures Through Conduction Welding (opens in a new tab)

  10. Resin percolation and intimate contact in fast processing of thermoplastic composites

    Fusion bonding of thermoplastic composites (TPCs) requires intimate contact before polymer interdiffusion and solidification can establish an interlaminar bond. The lack of such intimate contact results in voids or disbonds. This study showed through cross-sectional imaging and scaling analysis …

    texas Repository record for Resin percolation and intimate contact in fast processing of thermoplastic composites (opens in a new tab)

  11. Integration of a micro-gas chromatography system for detection of volatile organic compounds

    … of the current MEMS-GC column are: direct bonding of silicon to silicon, and peak band broadening due to slow temperature programming. As part of this thesis, a new gold eutectic-fusion bonding technique is developed to improve the sealing of the column. Separation of BETX, alkane mixture …

    gatech Repository record for Integration of a micro-gas chromatography system for detection of volatile organic compounds (opens in a new tab)

  12. Electrodynamics of a hypervelocity surface conversion process using electromagnetic accelerators

    … Because these methods rely on the mechani- cal bonding of the powder to the substrate the coatings and their bonds are a frac- tion of the parent material strength. To make full use of this repair process the coating has to bond to substrate with near parent material strength and coating has to …

    texas Repository record for Electrodynamics of a hypervelocity surface conversion process using electromagnetic accelerators (opens in a new tab)

  13. Interfacial bonding between thermoset and thermoplastic polyurethane reinforced textile grade carbon fiber: Structure property relationships

    … automotive and aircraft components. Hence, the fusion bonding study was conducted using epoxy-sized TCF-TPU and urethane-sized TCF-TSU composites. The lap shear strength of fusion boded TCF-TSU and TCF-TPU showed 21% improvement compared to PA66/GF and epoxy/CF bonded composites.</p> <p>The …

    utk-theses Repository record for Interfacial bonding between thermoset and thermoplastic polyurethane reinforced textile grade carbon fiber: Structure property relationships (opens in a new tab)

  14. Polymer Based Miniature Fabry-Perot Pressure Sensors with Temperature Compensation: Modeling, Fabrication, and Experimental studies

    … of these sensors often involves high temperature fusion bonding and harsh acid etching. On the other hand, a polymer material becomes an attractive choice for high sensitive and miniature pressure sensors due to its small Young's modulus relative to that of silicon/glass. Moreover, polymer …

    maryland Repository record for Polymer Based Miniature Fabry-Perot Pressure Sensors with Temperature Compensation: Modeling, Fabrication, and Experimental studies (opens in a new tab)

  15. STRUCTURAL HEALTH MONITORING AND REPAIR OF WELDED THERMOPLASTIC COMPOSITE JOINTS USING EMBEDDED MULTIFUNCTIONAL FILMS

    … necessitating effective joining techniques. Fusion bonding (welding) has emerged as a suitable method for TPCs due to their ability to be reshaped through heating and cooling, eliminating the need for mechanical fasteners, long curing times, and extensive surface preparation. Among the …

    lsu-thes Repository record for STRUCTURAL HEALTH MONITORING AND REPAIR OF WELDED THERMOPLASTIC COMPOSITE JOINTS USING EMBEDDED MULTIFUNCTIONAL FILMS (opens in a new tab)

  16. Rapid prototyping of all glass microfluidic platforms

    … as chemical etching, lithography, anodic and fusion bonding) fall short. They are time consuming, expensive and require multiple steps to produce a microfluidic device. Laser induced material modification is a promising substitute. It can ablate and bond glass substrates with the same setup. …

    colo-mines Repository record for Rapid prototyping of all glass microfluidic platforms (opens in a new tab)

  17. Hot embossing of polymeric tubular micro-components

    … namely plastic deformation, material flow and fusion bonding were identified and studied in detail. These studies allowed a fully functional machine to be developed, which has proved to be able to reliably produce 20 pieces parts per-minute when used with a continuous tube feeding system. The …

    strathclyde Repository record for Hot embossing of polymeric tubular micro-components (opens in a new tab)

  18. Electrokinetic Separation of Nucleic Acids in Thermoplastic Nanochannels

    … van de Waals interactions, hydrogen bonding and electric double layer overlap effects. However, the majority of these methods utilize glass-based nanofluidic devices which are not suitable for the use of point of care applications because of sophisticated, time consuming, high cost …

    ku Repository record for Electrokinetic Separation of Nucleic Acids in Thermoplastic Nanochannels (opens in a new tab)

  19. The Development Of A Fingertip Implantable Mems Tactile Sensing System

    … was developed and characterized. A localized fusion bonding technology based on carbon dioxide (CO2) laser assisted machining was proposed to achieve simultaneous bonding and dicing of fused silica wafer stacks, while maintaining temperatures inside the package sufficiently low that …

    penn Repository record for The Development Of A Fingertip Implantable Mems Tactile Sensing System (opens in a new tab)

Page 1 of 2