Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 91 for “"Fusion zone"”.
-
Modification of eutectic fusion zone microstructure
Includes bibliographical references (pages 90-92).
-
Effect of manganese and nickel additions in the welding flux on the fusion zone of pearlitic ductile iron, The
Includes bibliographical references (pages 214-224).
-
Effect of alloying additions in the welding flux on the graphitization and nodularization of the fusion zone in pearlitic ductile iron, The
Includes bibliographical references.
-
Multiscale study of the properties of hybrid laser-welded Al-Mg-Si alloy joints
… made from Al alloys typically fractures in the fusion zone, indicating that the fusion zone is the softest part of the joint. Thus, modifying the microstructure in the fusion zone and analysing the according mechanical properties is both academically and industrially of interest. In the first …
-
Micromechanical assessment of fatigue in airframe fusion welds
… aspects of fatigue performance in a fusion welded airframe alloy, 2024-T351. Within the overall program the initiation and growth of short fatigue cracks was studied for two forms of welding: Metal Inert Gas (MIG) and Variable Polarity Plasma Arc (VPPA). Fatigue testing has been …
-
Fiber laser weldability of austenitic nickel alloys
… faster cooling rates, and smaller heat affected zones. However, there is a still a lack of knowledge base on how laser welding process parameters affect the weldability of austenitic nickel alloys. In this work, laser welds were made on several austenitic nickel alloys from different alloy …
-
Short-Pulse Welding Technique for Resistance Spot Welding of Aluminum Alloy 6016-T4
… expulsion of molten material from the welding zone. Additionally, the technique provides significant energy and process time savings to enable a more efficient and flexible application in production. In this work, RSW process simulations and experimental welding tests using two medium frequency …
-
Nd:YAG Laser Welding of Ti-6Al-4V Alloy
… joint gap. The hardness is maximum in the fusion zone (FZ) followed by a sharp decrease in the heat affected zone (HAZ) to the base metal (BM). The low temperature annealing process increases the hardness of the fusion zone but the combination of the high temperature solution treatment …
-
Dissimilar laser welding of NiTi shape memory alloys
… due to its low heat input, minimum heat affected zone and good reproducibility. Despite all these benefits, some challenges such as formation of hard and brittle intermetallic compounds and selective vaporization, inherent in this technique still exist. Therefore, it is important to study and …
-
A study of laser-arc hybrid weldability of nickel-base INCONEL 738 LC superalloy
… such as IN 738, are very difficult to weld by fusion welding techniques due to their high susceptibility to heat-affected zone (HAZ) intergranular liquation cracking. An improvement in weldability could be realized by the deployment of innovative welding processes and/or the modification of the …
-
Investigating the Fusion Weldability of Al7075 and Solidification Crack Elimination using TiC Nanoparticles
… in manufacturing processes, such as casting and fusion welding, mainly due to solidification cracks. Several investigations have been conducted to mitigate this issue through welding parameter optimization, adjusting fusion zone composition, or adopting a solid-state welding process instead. …
-
MICROSTRUCTURE REFINEMENT AND MECHANICAL PROPERTY IMPROVEMENT OF AZ31 MAGNESIUM ALLOY RESISTANCE SPOT WELDS DUE TO INOCULANTS
Microstructure refinement was observed in the fusion zone of AZ31 magnesium (Mg) alloy resistance spot welds when an inoculant was added, either Ti, Al8Mn5, or Mn. The dependence of inoculant potency on the lattice disregistry between inoculants and matrix, and on the liquid cooling rate was …
-
An investigation of surface modification due to the deposition of silicon onto molybdenum
… pool increased the cross sectional area of the fusion zone, as compared to a laser radiated surface without the addition of silicon. The addition of silicon at translation velocities of 500 and 750 (mm/min), caused a substantial increase of both the fusion zone and molybdenum-silicon areas, …
-
Evaluation of the hot cracking sensitivity of 316 NG, 347 and 304 stainless steels using the hot ductility test and the modified subscale varestraint test
… of the base metal HAZ, weld metal HAZ and the fusion zone of the as-deposited pass. The hot ductility test was conducted on the Gleeble using standard parameters.</p> <p>Both, the varestraint test and Gleeble test were utilized to evaluate the hot cracking susceptibility of base metal HAZ in …
-
Nd: YAG laser welding of ZE41A-T5 magnesium sand casting alloy
… a condition of having an open keyhole mode. The fusion zone showed significant grain refinement due to high cooling rate. No grain coarsening was observed in the HAZ. The microhardness test showed that fusion zone hardness was recovered to the value of the base metal after natural aging of around …
-
A correlation of welding solidification parameters to weld macrostructure
… of model validation, the predicted and actual fusion zone sizes were in agreement, as were the predicted time temperature curves compared to those measured with thermocouples embedded in the plate.
-
Optimisation of GMAW via the alternating shielding gas technique
… of the weld joint, refined microstructure of the fusion zone, reduced heat input, and increased travel speeds of the welding torch. Yet, relatively little work has been carried out utilising this novel method. For instance, shielding gases employed during the arc welding procedures have been …
-
Investigating the susceptibility of X80 line pipe weld to hydrogen-induced damage
… infrastructure frequently occurs in weld zones due to microstructural heterogeneity in phase compositions, grain boundaries and local misorientations, and the presence of non-metallic inclusions and precipitates. In this study, microstructural pathways for hydrogen-induced damage in X80 …
Page 1 of 5