Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"GPS L1"”.
-
Adaptive Interference Mitigation in GPS Receivers
… hop-frequency and chirp-type interferences from GPS L1 signals. To mitigate unwanted interference, state-of-the-art ANFs typically adjust a single parameter, the notch centre frequency, and zeros are constrained extremely close to unity. Because of this, the notch centre frequency converges …
-
Récepteur SBAS-GNSS logiciel pour des applications temps-réel
… La modernisation des systèmes américain (GPS – Global Positioning System) et russe (GLONASS - GLObal Navigation Satellite System) ainsi que la venue des systèmes européen (Galileo) et chinois (COMPASS) permettront une multitude de nouvelles applications. Ce regroupement de systèmes de …
-
Conception et mise en oeuvre d'une tête de réception à échantillonnage direct RF pour les signaux de radionavigation par satellites
… Le prototype réalisé se concentre sur le signal GPS L1 C/A tout en conservant le maximum de flexibilité pour les travaux ultérieurs sur toute la bande GNSS. La chaîne de traitement du signal RF conçue permet une amplification d’environ 100 dB de toute la bande GNSS et possède une figure de bruit …
-
Resilient Navigation through Jamming Detection and Measurement Error Modeling
… technologies to protect, toughen, and augment GPS for a more resilient PNT. Time-sequential estimation improves navigation accuracy and allows for the augmentation of GNSS with other difficult-to-interfere sensors. Safety-critical navigation applications (e.g., GNSS/INS-based aircraft …
-
A study of TMn1-mode circular microstrip antennas for GPS interference mitigation applications
… signals in global positioning system (GPS) receivers. The main goals of the study are CRPA performance improvement and size reduction. Conventionally, planar CRPA designs consist of multiple dominant-mode right-handed circularly-polarized (RHCP) antenna elements. Various configurations …
-
Low-cost and flexible USRP based real-time global navigation satellite system receiver for ionospheric sounder
… The USRP N210 with DBSRX2 can be used to receive L1C/A and L2CM signals. In this study, C++ class based GNSS-SDR software is selected to process navigation solutions for GPS L1 and L2C signals collected by the front end. When signals with two different frequencies penetrate a dispersive medium, …
-
Development of a Multi-Frequency Adaptive Kalman Filter Based Tracking Loop for an Ionospheric Scintillation Monitoring Receiver
This thesis develops a combined GPS L1, L2C and L5 KF based tracking loop by exploiting the dispersive nature of the ionosphere and signal structure of the GPS signals. This results in a robust tracking loop suitable for a scintillation monitoring receiver. It also incorporates an adaptive …
-
Développement d'un récepteur hybride GPS/GALILEO en environnement réel
… navigation par satellites utilisant les systèmes GPS et Galileo. Le développement d'un récepteur hybride GPS/Galileo dans un environnement réel s'inscrit dans la première phase du projet. Développé dans Matlab-Simulink, le simulateur se compose de deux modules: le module de génération de signaux …
-
A Multi-Constellation Multi-Frequency GNSS Software Receiver Design for Ionosphere Scintillation Studies
… results of scintillation effects on the new GPS L5 signal based on data collected using a real-time scintillation monitoring and data collection system at HAARP, Alaska. The data collection setup includes a custom narrow band front end that collects GPS L1, L2 IF samples and two …
-
Improved GNSS Carrier Phase Tracking for Hand Held Receivers
… and verified empirically using live GPS L1 C/A signals. Considering this relationship, pedestrian dynamics is characterized using appropriately processed inertial sensors data to understand the effects on GNSS signal parameters. The oscillator g-sensitivity and line-of-sight dynamics …
-
Acquisition and tracking of weak GPS signals as received by cellular telephones
… as received by a cellular phone indoors. The L1 and L5 signals from GPS satellites and the L1 signal from Galileo satellites are considered. It is shown that long integration times and coherent integration are required for the weakest expected signals. Long coherent integration times require a …
-
GNSS pre-correlation waveform feature extraction methods for multipath-afflicted signal classification
… MATLAB. For testing and simulation purposes, the GPS L1 C/A signal structure was selected, as it represents the most fundamental GNSS signal, being the simplest in structure, and potentially allows for further extensions considering more complex-structured signals. The test data are numerically …
-
Improved Navigation Solution Utilizing Antenna Diversity Systems in Multipath Fading Environments
… theoretically and practically using real GPS L1 data collected in different indoor environments. An analysis of different metrics such as deflection coefficients, ROC curves and satellite availability, shows that the detection performance is considerably enhanced when utilizing the above …
-
Development and performance analysis of an attitude determination system using multiple GPS receiver configuration
… determination system which processes raw GPS measurements. To make this goal happen, we designed a recursive least-squares algorithm by combining both code and carrier phase measurements and fixing the ambiguity parameters with leastsquares ambiguity decorrelation adjustment method. In …
-
Relative positioning with Galileo E5 AltBOC code measurements
… des positions estimées avec les systèmes GPS (américain) et Galileo (européen) sur leurs différentes fréquences émises (GPS L1, GPS L2, GPS L5 pour GPS et Galileo E1, Galileo E5a, Galileo E5b et Galileo E5 AltBOC pour Galileo) a été menée dans ce mémoire. Pour ce faire, une combinaison …
-
Electrically Small, Near-Field Resonant Parasitic (NFRP) Antennas Augmented with Passive and Active Circuit Elements to Enhance their Functionality
… devices. Four global positioning system (GPS) L1 frequency (1.5754 GHz) rectenna systems were designed, fabricated and measured: three resistor-loaded and one supercapacitor-loaded. The simulated and measured results will be described; good agreement between them was obtained. The NFRP …
-
Signal processing and collective detection for locata positioning system
… Locata and the possibility of integration with GPS at the signal acquisition stage. The TH/DS-CDMA signal was fully characterised and its signal parameters identified without any knowledge of its Interface Control Document (ICD) or similar documents. The full characterisation allowed …
-
GNSS Signal Authenticity Verification in the Presence of Structural Interference
… on different processing levels of civilian GPS L1 C/A receivers and accordingly proposes some possible countermeasure techniques. It is shown that the presence of spoofing interference increases the power content of structural signals within the GNSS frequency bands and this feature can …
-
Low Noise Front End Signal Transport Design for L-band Phased Array Receivers
… an L-band analog front end for a direct sampling GPS phased array receiver is described, with particular attention to gain and noise figure in context of the full system link budget. The RF front end for the GPS phased array receiver meets design expectations by achieving a system gain of 65 dB …
-
Dynamically configurable architectures for multi-GNSS receiver
… frequency, can be multiplexed to process 16 GPS L1 C/A, 8 BEIDOU B1I, 4 GALILEO E1 or 1 GPS L5/GALILEO E5a/E5b channels. Not only are flexibility and programmability achieved, but resource utilisation is considerably reduced (45% to 96.5%) and power consumption is also reduced compared with …
Page 1 of 2