Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 88 for “"GT-Power"”.
-
Transient kallstartssimulering i GT-POWER
… har intressanta förbränningsegenskaper med ett högt oktantal och snabb förbränning. Användning av förnyelsebara bränslen reducerar utsläppen av koldioxid samt medför att vi inte längre behöver förlita oss på de fossila oljedepåerna. En egenskap hos etanol är att bränslet kräver mycket värme för …
-
Comparison of Predictive Gasoline Combustion Models Using GT-Power
… combustion models, SI Turb and FKFS in GT-Power and comparison of the models in order to assist future development of Gasoline engines at VCC. Predicting capabilities of the two calibrated combustion models is evaluated by its ability to predict the main operating parameters such as …
-
Predictive Diesel Combustion Using DI-Pulse in GT-Power
… combustion model for a Diesel engine in GT-Power using the DI-Pulse combustion object. The performance of the fully calibrated model was evaluated by analysing its capability to predict key operating parameters such as IMEP, CA at 50% burn, peak pressure and NOx . In order to calibrate …
-
Analysis of Engine Cold Start Simulation in GT-Power
… needed to implement a simulation model in GT-Power, for both gasoline and diesel engines. Two models were created, one for a gasoline engine with manual transmission and one for a diesel engine with automatic transmission, which aimed to simulate engine start-up at 20°C and -30°C. Test-rig …
-
Validation of a GT-Power Model for a Volvo D13 Heavy Duty Engine
… usage of engine-simulation software, like e.g. GT-Power, becomes more important since it helps to optimize the efficient use of experimental work, which is generally expensive in both cost and time. This work describes the validation of a GT-Power model for a Volvo D13 heavy duty engine based on …
-
INTEGRATION OF GT-POWER ENGINE MODEL WITH DSPACE VEHICLE MODEL FOR CO-SIMULATION AND VALIDATION
… components of the engine. Gamma Technology’s GT-POWER, a powerful 1-D detailed engine simulation commercial tool, is explored to provide detailed engine components. Although GT-POWER has multiple advantages such as modular design, high-accuracy, and user-friendly drag-and-drop approach for …
-
Real Time Fast Running Engine Modelling in GT Power- Development of the Virtual Drivetrain Simulation Environment
… model to a Real Time Fast Running Model (FRM) in GT Power for the VolvoTrucks Heavy Duty Diesel Engine. The existing model is a high fidelity engine model which is good to run steady state simulation, but when it comes to transients simulation, it is difficult and slower. The GTPower engine model is …
-
1D Modeling and Simulations of Soot Oxidation in Diesel Particulate Filters and Monoliths using GT-POWER
… monolith model and also in a DPF model using GT-POWER. The detailed kinetic models and data origins from previously published data. The DPF model consists of a number of interrelated sub-models soot oxidation by NO2 , NO oxidation and pressure drop. These sub-models were developed by using …
-
The effect of altitude on turbocharger performance parameters for heavy duty diesel engines: experiments and GT-Power modeling
… engines at 5000ft elevation and calibrating GT-Power computer simulation models against the experimental data at 5000ft elevation. After the models were calibrated against experimental data, the models were extrapolated to the altitude capability of these engines and the critical boundary …
-
1D SIMULATION OF DIRECT WATER INJECTION IN A SPARK IGNITED ENGINE
… is a limitation towards higher efficiency and power output in spark ignited engines. Direct water injection into the combustion chamber is a potential solution to this problem by means of the ‘charge cooling’ effect of water. 1D Fluid Dynamic simulation tool GT-Power has been used to develop a …
-
Volumetric efficiency modeling of a four stroke IC engine
… timing, valve lift, intake and exhaust runner length, and intake and exhaust pressure. To explore how these parameters impact volumetric efficiency, a 1D unsteady thermal fluid analysis is performed to determine the instantaneous cylinder pressure and the mass flow rate through the intake and …
-
Optimalizace systémů EGR a vodního vstřikování u zážehového motoru
… losses, EGR, low-pressure EGR, water injection, power increasing, BSFC, GT-Power, thermodynamic model, engine knock
-
PERFORMANCE IMPROVEMENT OF A SINGLE CYLINDER, AIR-COOLED, SPARK-IGNITED ENGINE UTILIZING 1-D CYCLE SIMULATION
… is about using a 1-D cycle simulation program (GT-Power) for improving the power of a multi-purpose engine to further extend its use.
-
Parametric combustion modeling for ethanol-gasoline fuelled spark ignition engines
… model was built inside a user compound in GT-Power. In this model, selected burn durations were computed using correlations as functions of physically based non-dimensional groups that have been developed using the experimental engine database over a wide range of ethanol-gasoline blends, …
-
Zvyšování efektivity zážehového motoru pomocí vodního vstřikování
… modelovaním systému vstrekovania vody v programe GT-POWER.
-
Applications of Maisotsenko cycle based indirect evaporative cooling technology in gas turbine power plants
… increase in demand for gas turbine (GT) generators as back-up or peak load generators. Consequently, enhancing the efficiency of gas turbine power plants represents a potential avenue for the generation of additional electricity, particularly in an era where electricity is a dominant …
-
Hybrid Turbocharging: Ett sätt att få bättre motoreffekt och återvinna motorkraft
… carried out using the engine simulation software GT-POWER. The simulations were based on a four-cylinder engine designed by GT-POWER to ensure comparable results. Multiple simulations were done using either a single or sequential turbocharger configuration for either a conventional or a hybrid …
Page 1 of 5