Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 223 for “"Gap Size"”.
-
Gap Size Effect on Low Reynolds Number Wind Tunnel Experiments
A system was designed to measure the effect of gap size on semi-span low Reynolds number wind tunnel experiments. The lift forces on NACA 1412, NACA 2412 and NACA 4412 half wings were measured using a strain gauge balance at chord Reynolds numbers of 100,000 and 200,000 and three different gap …
-
Forest canopy gap size affects regeneration potential of interior Douglas-fir
… but their survival appears to depend on the size of disturbance gaps, environmental resources and conditions, and colonization by mycorrhizal fungal symbionts. In two separate experiments that differed in climate (very dry, hot and dry, cool Interior Douglas-fir (IDF) subzones), and …
-
Optimisation of dynamic response of bridges through control of joint gap size
The appropriate selection of end joint gaps in bridges with seat-type abutments has hardly received proper attention in the literature. The size of these gaps, which exist between the deck and the abutment of a bridge in its longitudinal and transverse directions, affects the boundary conditions of …
-
The effect of gap size on performance of metal plated joints in compression
Metal plate splice joints with gaps between butting pieces of lumber were tested in compression to evaluate the effect of gap size on joint serviceability performance. The current design methodology for compression splice joints was also evaluated. Specimens representing floor and roof trusses, …
-
Impact of Gap Size on Environmental Conditions, Survival, and Early Growth of 5 Pacific Northwest Species
The formation of forest gaps and their resulting size and shape is highly variable across forest types and can produce a wide range of patterns in seedling establishment. The impact of gap size on microclimate and seedling growth and survival after planting, specifically in mixed-species stands is …
-
A study of the influence of ring gap size on the lubrication of piston rings in an internal combustion engine
… was focused on the influence of the size of the piston ring gap in the top two rings on the OFT between the piston ring and cylinder liner of a single cylinder diesel engine (Hatz lB2O). The project studied the power stroke (at 500 ATDC for the top ring and 40° ATDC for the middle …
-
The influence of mechanized selective logging, felling intensity and gap-size on the regeneration of a tropical moist forest in the Kibale Forest Reserve, Uganda
Thesis (Ph. D.)--Michigan State University. Department of Botany and Plant Pathology, 1987
-
Influence of white-tailed deer on nitrogen cycling and vegetative community change in canopy gaps in a hemlock-northern hardwood forest
Our research explored the influence of deer and gap size on nitrogen cycling, soil compaction, and vegetation trajectories in twelve canopy gaps of varying sizes in a hemlock-northern hardwood forest. Each gap contained two fenced and two unfenced plots. Gap size, soil compaction, winter deer use, …
-
Ecological Impact of Glaze Storm Damage in an Appalachian Oak Forest
Glaze damage to canopy trees, gap size and seedling regeneration was surveyed relating to site topographic features after a major glaze storm at Fishburn Forest in the central Appalachian mountain region. The survey sites were stratified according to aspect and landform, and sample plots were …
-
Comparison of marginal fit of lithium disilicate crowns fabricated with CAD-CAM technology using conventional impressions and two intra-oral digital scanners.
… techniques. This study compared marginal gap size in crowns fabricated by conventional and digital impression methods. One typodont maxillary right central incisor was prepared for an all-ceramic crown. Ten impressions were made with each method: conventional using polyvinyl siloxane …
-
Modelling of crushing operations in the aggregates industry
… the input data in the primary crushing phase (gap size (mm), feed size distribution, throughput (t/hr) and ore type) with the output data (product size distribution and power draw). The effect that changing the gap size has on the product size distribution was investigated for the gyratory …
-
Žiedinių rezonatorių elektromagnetinio pralaidumo spektrų tyrimas keičiant jų matmenis /
… dependence on SSR metal strip width, length and gap size has been investigated. Instantaneous electric current distribution in SSR circuit during LC and quadrupole resonances has been shown. Dipole momentum and radiation losses dependence on SSR gap size metal strip width has been investigated to …
-
Tennessee Per-pupil Expenditures in Special Education and Academic Achievement
… act has required states to close achievement gaps. The purpose of this study was to investigate the relationships between special education spending by districts in the state of Tennessee and standardized achievement for students with disabilities. Secondary data were obtained from the …
-
Overcoming technological barriers in ReRAM based neural networks by addressing scalability and complexity challenges
… current ReRAM technology faces barriers. Its size is limited to a few megabytes, which is in sufficient for modern NNs with billions of parameters, revealing a gap size issue. While ReRAMexcels at MVM, it struggles with the diversity of nonlinearities needed for com plex NNs, creating a …
-
The role of harvest gaps in the plant diversity of a northern hardwood forest of Northern Wisconsin, USA
… disturbance-based management is using harvest gaps to emulate natural gaps that result from canopy disturbances. In this dissertation, I examine harvest gaps and their influence on ground-layer plants in the context of canopy gap theory. With the help of others, I measured four planted tree …
-
Evaluating the marginal integrity of lithium disilicate veneers fabricated by digital impressions and CAD/CAM compared to conventional techniques.
This in vitro study compared marginal gap size in anterior lithium disilicate veneers produced by conventional and digital impressions. One typodont right central incisor was prepared for an all-ceramic cast. Ten conventional veneers were fabricated using Type IV stone, PVS, and IPS e.max press, …
-
Optimization of the Bowtie Gap Geometry for a Maximum Electric Field Enhancement
Optimization of the geometry of a metallic bowtie gap at radio frequency is presented in this thesis. Since the design and fabrication of a plasmonic device (nanogap) at nanoscale is challenging, the results of this study can be used to estimate the best design parameters for nanogap structure. The …
-
The drag and lift characteristics of a cylinder placed near a plane surface
… of the drag coefficient as a function of gap size was found to exhibit an interesting and unexpected trend. The drag was a minimum when the cylinder was resting on the plate and was a maximum at a gap size of approximately one cylinder radius. Flow visualization studies together with …
-
Heat Transfer and Friction Effect of Double-Sided Partial Length Strip Fin Arrays in High Aspect Ratio Rectangular Channel
… the upper and lower channel surfaces with three gap size to channel height ratios considered G/H = 0.2, 0.3, and 0.4. The thermal performance of each fin configuration is determined from the measured pressure drop across the array and regionally averaged heat transfer coefficients at flow …
-
The effect of flow geometry on critical heat flux.
… diameter, (ii) heated-equivalent diameter, (iii) gap size, (iv) unheated adjacent surface, (v) heated adjacent surface, (vi) curvature, (vii) eccentricity (including bowing), and (viii) channel shape. It is found that some of the geometric effects on CHF depend on the flow conditions and the CHF …
Page 1 of 12