Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"Gas atomization"”.
-
Computational Modelling of Close-Coupled Gas Atomization
… the interaction between the melt and the gas from being analysed. The pressure developed in front of the melt nozzle i.e., the aspiration pressure with the presence of melt in the chamber cannot be studied due to the high temperature of the melt. The flow features such as recirculation …
-
Multiphase modelling of the characteristics of close coupled gas atomization
… the modelling aspects of primary and secondary atomization. Initially two-dimensional analysis is carried out to investigate the influence of flow parameters (reservoir pressure and gas temperature principally) and nozzle geometry on final powder yielding. Among the different types, close …
-
a numerical investigation of free-fall swirling gas atomization process
Gas atomization is a complex multi-physics route in the powder production field. Fine spherical metal powders can be produced using this technique via atomizing superheated molten metals. In the powder production industry, free-fall gas atomizer is often used for the melt atomization. The most …
-
Analysis and development of gas atomization for high molecular weight polymers
… remain underrepresented in AM powder libraries. Gas atomization, widely employed for metal powders, offers a promising alternative for generating spherical, free-flowing particles. However, its application to polymers presents unique challenges due to their high viscosity and non-Newtonian melt …
-
High-speed imaging and computational modelling of close-coupled gas atomization
Gas atomization process, especially Closed Coupled Gas Atomization (CCGA) is a very efficient processing method to produce ultra fine, spherodised metal powders. In this process, the high-pressure gas jet is used to disintegrate the molten metal stream in to the spherical powders. Due to …
-
Gas atomization of high molecular weight polymers: feasibility studies and process development
<p>A new gas atomization process (GAP) was explored for mass producing high-quality spherical powders and very high aspect ratio microfibers from molten polymers. The process involves the use of high-pressure (7.6 MPa or 1050 psi) nitrogen gas and a specifically designed nozzle to atomize a molten …
-
Optimization Studies for the Gas Atomization and Selective Laser Melting Processes of Al10SiMg alloy
… properties. Present work investigates both the gas atomization and SLM processes for the Al10SiMg alloy with a focus on establishing the relationships among atomization parameters, powder characteristics, SLM parameters and materials properties. Al10SiMg alloy powders (Al-10wt.%Si-0.5wt.%Mg) …
-
Metallic powders production via Gas Atomization: Material development for Laser Powder Bed Fusion processing
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Gas atomization processing of tin and silicon modified LaNi5 for nickel-metal hydride battery applications
… powder production methods, like high pressure gas atomization (HPGA) that could reduce manufacturing cost of nickel-metal hydride powder;This work examined the relationship between gas atomization processes, powder particle solidification phases, and hydrogen absorption properties of ultra fine …
-
Novel consolidation methods of Fe-base oxide dispersion strengthened powders produced via gas-atomization reaction synthesis
… due to contamination from milling materials. Gas atomized reaction synthesized (GARS) Fe-ODS precursor powder production offers an alternative higher efficiency method of producing Fe-ODS materials, but so far have only been consolidated via hot isostatic pressing. Novel application of vacuum …
-
Advanced gas atomization production of oxide dispersion strengthened (ODS) Ni-base superalloys through process and solidification control
<p>A novel gas atomization reaction synthesis (GARS) method was utilized to produce precursor Ni-Cr-Y-Ti powder with a surface oxide and an internal rare earth (RE)-containing intermetallic. Although Al is necessary for industrial superalloy production, the Ni-Cr base alloy system was selected as a …
-
Development of atomization gas and alloy composition for gas atomization reaction synthesis of oxide dispersion strengthened ferritic alloys
… the traditional method of producing ODS alloys, gas atomization reaction synthesis (GARS) produces a cleaner feedstock of powders with Cr-enriched surface oxides and Y-containing intermetallics, creating oxide dispersoids during consolidation and heat treat, as in additive manufacturing …
-
Microstructural investigation of mixed rare earth iron boron processed via melt-spinning and high-pressure gas-atomization for isotropic bonded permanent magnets
… melt-spun to be compatible with high-pressure gas-atomization (HPGA). The cooling rates in HPGA are lower than melt-spinning, as the powders are quenched via convective cooling, compared to melt-spinning, which quenches initially by conductive cooling. Early alloy designs, in gas atomized and …
-
Aluminum powder metallurgy processing
… that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder;The hypothesis was tested with pure aluminum powders produced by commercial air …
-
Microstructure and properties of gas atomized powder for Nd-Fe-B sintered permanent magnets
… interest stems from many of them already having gas atomizers and a desire to use them. Thus, starting an investigation into the gas atomization powder synthesis route. Gas atomization is a process that has been widely studied and used for producing powder. There has been a wide range of work on …
-
Gas absorption by Atomization (Summary)
… of this work was to test the applicability of atomization to absorption by means of a two-fluid or gas-atomization nozzle. Since absorption depends directly on the amount of liquid surface exposed to absorable gas, and atomization of a liquid produces the largest possible surface to mass ratio, …
-
Gas absorption by atomization
… of this work was to test the applicability of atomization to absorption by means of a two-fluid or gas-atomization nozzle. Since absorption depends directly on the amount of liquid surface exposed to absorbable gas, and atomization of a liquid produces the largest possible surface to mass …
-
Multiphase Flow Modeling of Molten Metal Atomization at High Gas Pressure
The high-pressure gas atomization is well known as one of the best powder manufacturing processes due to its controllability over powder size distribution. However, with the continuous improvement of new alloys, optimizing the operating parameters to maximize the yield is costly and time-consuming. …
Page 1 of 3