Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 396 for “"Gas injection"”.
-
A Technical Survey of Immiscible Gas Injection Projects
… completed projects which implemented immiscible gas injection as an enhanced oil recovery process. A data base consisting of information from 24 immiscible gas injection projects was compiled. Selected fluid, reservoir, and oil recovery parameters were analyzed using frequency plots and …
-
Remediation of contaminated sites using hot gas injection
… by scrubbing to remove air pollutants. The hot gas from this phase of the process is then injected into the subsurface formation after being used to preheat the fuel/air mixture to catalyst operating temperature, to increase contaminant temperature, hence vapor pressure leading to increased …
-
Dissolution of Si in Molten Al with Gas Injection
… bath temperature, fluid flow conditions, and gas stirring on the dissolution of Si in molten Al, plus the results of physical and numerical modeling of the flow to corroborate the experimental results. The dissolution experiments were conducted in a revolving liquid metal tank to generate a …
-
Compositional modeling of gas injection in tight oil reservoirs
… increase. Based on various field pilots, gas injection is by far the most promising IOR/EOR technology for tight oil reservoirs. This work developed an improved compositional model and its associated simulator to understand the complex multiphase and multicomponent behaviors during gas …
-
Improving Recovery of Liquids from Shales Through Gas Injection
This thesis investigates the use of gas injection for improving liquids recoveries from oil and condensate containers in shale reservoirs. The objective is accomplished by building simulation models of a shale reservoir that contains gas, condensate and oil. In these shales, the gas container is at …
-
A GAS-INJECTION NEGATIVE ION SOURCE FOR ACCELERATOR MASS SPECTROMETRY
… to develop an ion source that would allow direct injection of gaseous samples, thus eliminating the processing. Previous attempts to build such an ion source have been limited by low mass usage efficiency and severe memory effects. This dissertation describes the development of a plasma negative …
-
Gas injection and mobility control in fractured, oil-wet carbonate reservoirs
… of oil remaining in the reservoir. Gravity-aided gas injection is studied at the lab-scale in this work to enhance oil recovery from fractured reservoirs. The miscibility of the gas with a model oil (decane with naphthenic acid) is varied by enriching the methane with ethane. Mobility of the gas …
-
Study of alternating anionic surfactant and gas injection in carbonate cores
… with the addition of surfactants, or gas injection to have immiscible and miscible displacement processes, or combination of these processes. Secondary immiscible gas floods have been applied for several years in carbonate reservoirs and the typical recovery is found to be around …
-
Performance and combustion characteristics of a diesel-pilot gas injection engine
High pressure injection of natural gas with diesel liquid pilot fuel has been investigated in a single-cylinder two-stroke diesel engine of low compression ratio. The thermal efficiency and emissions of NOx, CO and HC were determined at 1200RPM as a function of load. Variations of the pilot-diesel …
-
Gas Injection for Enhanced Oil Recovery in Organic Rich Shale Reservoirs
… rate decline and low ultimate recovery. Gas injection, mainly COv2 injection, has been successfully applied for EOR in conventional reservoirs, making it attractive for implementation in shales. However, organic rich shale exhibits poor fluid transport, and contains kerogen rich in …
-
Evaluating reservoir production strategies in miscible and immiscible gas-injection projects
Miscible gas injection processes could be among the most widely used enhanced oil recovery processes. Successful design and implementation of a miscible gas injection project depends upon the accurate determination of the minimum miscibility pressure (MMP) and other factors such as reservoir and …
-
Transient melt flow and gas injection characteristics in continuous casting tundishes
Includes bibliographical references (pages 147-155).
-
Design of a Gas Injection System for the Dense Plasma Focus
Made available in DSpace on 2017-07-06T18:59:06Z (GMT). No. of bitstreams: 3 Temple_Brian_A_MS.pdf: 58622279 bytes, checksum: b73f73173b336cac3fd1e44f2b880bde (MD5) Temple_Brian_A_MS_ABS.pdf: 417230 bytes, checksum: cca4fd5b1f0ad6b86cd27889a69438d7 (MD5) license.txt: 4813 bytes, checksum: …
-
Experimental investigation of gas injection gravity drainage in naturally fractured reservoirs
… one of the ways to add to global oil production. Gas injection is considered one of the largely utilized EOR methods. Especially, gas supported gravity drainage process has great potential for production from dipping fractured reservoirs to assist the displacing fluid for producing more oil. This …
-
Mobility control of gas injection in highly heterogeneous and naturally fractured reservoirs
… EOR techniques, such as water alternating gas (WAG) and foam injection, may be used in NFRs to improve oil recovery. Foam injection may be modeled by empirical or mechanistic models, the latter being capable of representing foam generation and coalescence effects. Numerical models are …
-
Numerical simulation of foam-assisted immiscible gas injection for enhanced oil recovery
The efficiency of foam displacement in gas enhanced oil recovery (EOR) in low-permeability (1-10 mD), heterogeneous carbonate formations depends on the stability of the foam in the presence of oil. This study presents a new approach to determine foam model parameters using the Computer Modelling …
-
Investigation of EOR performance in shale oil reservoirs by cyclic gas injection
… Well production performance in shale oil or gas reservoirs strongly depends on the size of fracture-network. The induced fractures that connect the natural fracture complexity provide high flow capacity for injected fluid to access the hydrocarbons trapped in shale matrix. However, in such a …
-
Multiphase mechanisms and fluid dynamics in gas injection enhanced oil recovery processes
Currently, the Water-Alternating-Gas (WAG) process is the most widely practiced horizontal mode gas injection process in the industry. Although this process is conceptually sound, it has resulted in low (5 – 10%) oil field recoveries. Conversely, the gravity stable mode of gas injection has carved …
-
Transient Convective Heat Transfer in Closed Containers During and After Gas Injection
… thin walled closed containers during and after gas injection. The different modes of heat transfer were identified, and correlations were made for each. Correlations are presented for the injection period, post-top injection, post-bottom injection, post- tangential, post-radial injection, and …
Page 1 of 20