Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Gate oxide breakdown"”.
-
Bimodal Gate Oxide Breakdown in Sub-100 nm CMOS Technology
… CMOS scaling is almost reaching its limits. The gate oxide is now only a few atomic layers thick, and this extremely thin oxide causes a huge leakage current through the oxide. Therefore, a further reduction of the gate oxide thickness is extremely difficult and new materials with higher …
-
Study Of Gate Oxide Breakdown And Hot Electron Effect On Cmos Circuit Performances
… of the transistor dimensions--The transistor gate length and the gate oxide thickness drop down to only several nanometers. Today the semiconductor industry is already dominated by submicron devices and other material devices for the high transistor density and performance enhancement. In this …
-
Study Of Oxide Breakdown, Hot Carrier And Nbti Effects On Mos Device And Circuit Reliability
… (HC) effect becomes more significant. When the oxide is scaled down to less than 3 nm, gate oxide breakdown (BD) often takes place. As a result, oxide trapping and interface generation cause long term performance drift and related reliability problems in devices and circuits. The RF front-end …
-
Characterization of hot carrier reliability in deep submicronmeter MOSFETs
… on the current-voltage characteristics, gate oxide breakdown and hot carrier reliability of deep submicrometer n-MOSFET is studied in detail. The reliability of 0.18 um n-MOSFETs stressed under hot carrier injection and enhanced by substrate bias, is studied. The manipulation of …
-
System-level modeling and reliability analysis of microprocessor systems
… instability (PBTI), hot carrier injection (HCI), gate-oxide breakdown (GOBD), backend time-dependent dielectric breakdown (BTDDB), electromigration (EM), and stress-induced voiding (SIV) is proposed to analyze the impact of each wearout mechanism on state-of-art microprocessors and to accurately …
-
RF to Millimeter-wave Linear Power Amplifiers in Nanoscale CMOS SOI Technology
… nevertheless, remains challenging due to the low breakdown voltages of CMOS transistors and the loss from on-chip matching networks. These limitations have reduced the design space of CMOS power amplifiers to narrow-band, low linearity metrics often with insufficient gain, output power, and …
-
Device and Circuit Level EMI Induced Vulnerability: Modeling and Experiments
… integrated circuits (ICs). Metal-oxide-semiconductor field-effect-transistors (MOSFETs) in the ICs may be disrupted under EMI conditions due to transient voltage-current surges, and their internal states may change undesirably. In this work, the vulnerabilities of silicon MOSFETs …
-
RF Circuit Designs for Reliability and Process Variability Resilience
Complementary metal oxide semiconductor (CMOS) radio frequency (RF) circuit design has been an ever-lasting research field. It has gained so much attention since RF circuits offer high mobility and wide-band efficiency, while CMOS technology provides the advantage of low cost and high integration …
-
Study Of Nanoscale Cmos Device And Circuit Reliability
… of the transistor dimensions -The transistor gate length drops down to tens of nanometers and the gate oxide thickness to 1 nm. In the future several years, the deep submicron devices will dominate the semiconductor industry for the high transistor density and the corresponding performance …
-
Investigation of factors determining charged device model electrostatic discharge reliability of integrated circuits
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2027-08-01
-
Design and Simulation of Device Failure Models for Electrostatic Discharge (ESD) Event
… an ESD stress. Standard Complementary Metal-Oxide-Semiconductor (CMOS) process and high voltage Doublediffusion Metal-Oxide-Semiconductor (DMOS) process are used for design of experiment. A multi-function test platform High Power Pulse Instrument (HPPI) is used for ESD event evaluation and …
-
Variation-aware and process-sensitive reliability simulator and its application for analog and digital circuits
A reliability simulator for traditional gate oxide time dependent dielectric breakdown (TDDB) and the newly emerged middle-of-line (MOL) TDDB in both digital and analog circuits’ is built. A methodology and its corresponding algorithms to extract vulnerable features for gate oxide time dependent …
-
Reliability and Data Analysis of Wearout Mechanisms for Circuits
… failure analysis of circuits, as well as investigate the factors for accelerating testing for front-end-of-line time-dependent dielectric breakdown (FEOL TDDB). The separation of wearout mechanisms for circuits will be investigated, and the identification of failure modes for the failure samples …
-
Class-e Cascode Power Amplifier Analysis And Design For Long Term Reliability
This study investigated the Class-E power amplifier operating at 5.2 GHz. Since the operation of this amplifier applies a lot of stress on the switching transistor, a cascode topology was applied in order to reduce the drain-source voltage stress. Such an amplifier was designed and optimized in …