Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 96 for “"Gelation time"”.
-
An Experimental Study of Conformance Treatments Using Crosslinked Polyacrylamide Polymer
For the delayed gelation technique employed in this study, the redox reaction involving the reduction of the hexavalent chromium cations to its trivalent form is believed to be the rate controlling step of the gelation reaction. The gelation time of a gelling solution decreases with the increasing …
-
Mesoporous Functionalized Materials for Post-Combustion Carbon Dioxide Capture.
… surfactants. Reaction media strongly affected gelation time. Thus, in basic media gelation occurred immediately while acid increased gelation time. Material structures were studied by IR spectroscopy, porosimetry, XRD, and SAXS methods. In spite of the absence of an inorganic linker, obtained …
-
Evaluation of novel polyethersulfone membranes developed using charged surface modifying macromolecules for the removal of pharmaceutically active compounds and endocrine disrupting compounds from drinking water
… less hydrophilic membranes with increasing pre-gelation time or PES concentration, in comparison to the control membranes. Pre-gelation time (i.e., three minutes versus no pre-gelation time) increases membrane porosity, and therefore flux is increased, without compromising removal. Increased PES …
-
FUNCTIONAL SILK-BASED MATERIALS: FROM UNDERSTANDING TO CONTROL OF SELF-ASSEMBLING PROCESS
… with tuneable properties (i.e. stiffness and gelation time) and magnetic silk materials.
-
The Development of Gelatin Based Tissue Adhesives for Use in Soft Tissue Biomedical Applications
… were performed to characterize the pH, gelation time, diffusion processes, material properties, adhesive properties, and the drying variables on the material and adhesive properties of Gelatin Resorcinol Dialdehyde (GR-DIAL) tissue adhesives by varying formulation. Three adhesive …
-
Physical and rennet coagulation properties of recombined cheese milk made from milk protein concentrate (MPC-56) : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Food Technology
… cheese milk were determined in terms of gelation time (GT), storage modulus (G'), and the force required to fracture the renneted gels (yield force). In general, G' and yield force decreased with increasing severity of heat treatment. Gelation time appeared to remain unaffected by heat …
-
Rennet coagulation properties of heated milks : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Food Technology at Massey University
… of milk as indicated by an increase in gelation times and a decrease in gel strengths (both determined using the Bohlin VOR Rheometer). There was a close correlation between the extents of association of β-Lg with the casein micelles and the changes in gelation time or gel strength. When …
-
Gelation and melting point depression in PVDF-based gel electrolytes
… and results of experimental investigations into gelation and melting point behaviour for polymer gel electrolytes. The study used one of the most prominent types of materials in the commercial world—polyvinylidene fluoride-based (PVDF) gel electrolytes—focussing on the effects of gelation …
-
Gelation Characteristics and Osteogenic Differentiation of Stromal Cells In Inert Hydrolytically Degradable Micellar Polyethylene Glycol Hydrogels
… The hydrogels were characterized with respect to gelation time, modulus, water content, sol fraction, degradation, and osteogenic differentiation of encapsulated marrow stromal cells (MSCs). Chain extension of PEG with short hydrpphobic segments resulted in micelle formation for all types of …
-
Gel Formation by the Self-Assembly of Small Molecules: Insights from Solubility Parameters
… In this thesis, we build a framework for gelation via a common gelator based on Hansen solubility parameters (HSPs). Using HSPs, we construct 3-D plots showing regions of solubility (S), slow gelation (SG), instant gelation (IG), and insolubility (I) for DBS in different solvents. Our …
-
Synthesis and Characterization of Injectable Star-shaped Poly(Lactide-co-Glycolide-co-Acrylate) Macromers
… research work, the effects of these factors on gelation time and ultimate storage modulus have been experimentally determined. Generally, the effects of photoinitiator are not obvious. Water content and NVP in hydrogel precursor solution are the most important factors on rheological properties …
-
STUDY OF CELL VIABILITY DURING LASER DIRECT WRITING OF CELL-ALGINATE SUSPENSION
… studies investigating the effect of alginate gelation on cell viability in laser-assisted cell printing are lacking. The objective of this study is to investigate the effects of gelation, gelation time, sodium alginate concentration, and the effect of operating conditions such as the laser …
-
Influence of the structure of rennet-induced gels on the cheesemaking process and cheese composition : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in food technology, Institute of Food, Nutrition and Human Health, Massey University
… (G') increased with a decrease in pH while the gelation time (GT) increased with pH increase. The permeability coefficient (B) increased with a decrease in pH. Rennet gels made at 25, 32 and 40°C showed that the G' values increased while gelation time decreased with an increase in temperature, …
-
Effect of biopolymer addition on the properties of rennet-induced skim milk gels : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Food Technology at Massey University, Palmerston North, New Zealand
… (DWS) showed that the aggregation and gelation time and the gel strength was affected by the addition of these biopolymers. It was also shown that the syneresis behaviour, as well as the microstructure of rennet gels as imaged by confocal laser scanning microscopy (CLSM), was altered …
-
Pepsin-induced coagulation and in vitro dynamic gastric digestion of model infant formulae : a thesis presented in partial fulfilment of the requirements for the degree of Master of Food Technology at Massey University, Manawatū, New Zealand
… along with the highest stiffness. Moreover, the gelation behaviour of Sample 40, 60 and 80 was examed at 0 U/mL and 2.5 U/mL of pepsin concentration, and the acidification was done by the addition of GDL. For Sample 40 and 60, the breaking stress (σₘₐₓ) of pepsin-induced gels has smaller value at …
-
Using fungicides or combinations of fungicides to provide mold and decay fungal protection to OSB
… was studied by measuring change in the resin gelation and viscosity. After these screening experiments were completed, large size boards were prepared and mechanical and decay resistance properties were examined. It was found that mold and decay resistance properties of strandboard directly …
-
Stability of microbial transglutaminase and its reactions with individual caseins under atmospheric and high pressure
… range from 0.1 to 400 MPa at 40°C within a time from 0 to 60 min in a TRIS-acetate buffer at pH 6.0. The inactivation of both enzymes at these conditions followed a first order reaction model. The high inactivation rate constant of 26.6 x10-3/min-1 for factor XIIIa at low pressure (50 MP) …
-
BIOACTIVE SELF-FORMING HYDROGELS FOR BIOMEDICAL APPLICATIONS
… functionalization has no effect on mechanics or gelation time. Nor-Tet hydrogels functionalized with adhesive RGD peptides exhibit exceptional cell-matrix interactions, and stem cells in Nor-Tet solutions are protected from shear forces cells experience during liquid cell injections. Nor-Tet …
-
Rheology and microstructure of acid milk gels : the role of fat globule membrane : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Food Technology at Massey University
… For all recombined milk systems both the pH of gelation and the gelation time were influenced by the heat treatment of reconstituted skim milk, i.e. heating increased the pH of gelation and decreased the gelation time. The microstructure of the acid gel network was determined by confocal …
-
Macronutrient-Flavonoid Interactions, Effects in Model Food Matrices
… seed and green tea extracts may moderately alter gelation properties, including gel strength and gelation time. Likewise, emulsion stability was negatively modified while foam stability exhibited an inverse alteration.
Page 1 of 5