Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Generalized Maxwell Model"”.
-
Modeling Droplet Impingement Dynamics on Micropillar-Arrayed Viscoelastic Substrates Through Microgeometry-Free and Multiscale Methods
… has been thoroughly investigated by two distinct modeling methods, i.e., microgeometry-free and multiscale modeling methods. The viscoelasticity of the micropillar-arrayed substrate is characterized by a five-parameter generalized Maxwell model via the Laplace-Carson transform. In the …
-
Stress relaxation of glass using a parallel plate viscometer
… using a finite term Prony series of a Generalized Maxwell model. The additional goals of this study are to compare the results with those obtained by a previous student using a tensile creep apparatus, and to compare the experimental results with a numerical simulation using the finite …
-
Free-Energy Based Modeling of Planar Dielectric Elastomer Actuators
… light weight, and low cost. However, the task of modeling of DEAs is typically challenged in the presence of the nonlinear features, time-independent viscoelastic behaviors, complex electromechanical coupling, etc. To address such a challenge, a free-energy based model for DEAs moving in vertical …
-
Chemo-Thermo Cure of Viscoelastic Materials for Semiconductor Packaging Applications
… energy. There is a need to develop a generic modeling formulation that is applicable to any material of interest in order to enable the study of different bonding materials and develop optimized curing cycles. This study reports a numerical formulation to evaluate the stress generated and …
-
EXPERIMENTAL CHARACTERIZATION OF STRESS RELAXATION IN GLASS
… region using a finite term Prony series of a Generalized Maxwell model. This study focuses on viscoelastic characterization of stabilized glass samples at lower stress levels between 3 and 12 MPa where it demonstrates linearity. Analysis and post-processing of creep data, performed in MATLAB …
-
Experimental characterization of the viscoelastic behavior of a curing epoxy matrix composite from pre-gelation to full cure
Process models have been used to predict the flow and stress development during manufacturing of composite structures for over 20 years. To date, these models have been treated separately, and the required material property models (viscosity and modulus) have also been treated separately. The …
-
Robotic Gripper and Manipulator Design and Analysis for Button Mushroom Harvesting
… mechanisms was proposed. Additionally, a dynamic model for a 4-link SCARA manipulator with a PRRR configuration was developed for optimized mushroom harvesting. Compression and stress-relaxation tests were conducted on white button mushrooms of various shapes and sizes using a Texture Analyzer and …
-
Predicting Long-Term Creep Behavior Using Short-Term Stress Relaxation Data in Expanded Polyethylene Foam
… relaxation of four EPE specimens was accurately modeled using a three-term Prony series, which represents the Generalized Maxwell Model, attributing behavior to polymer viscoelasticity and gas diffusion. Furthermore, creep predictions derived from short-term (22-hour) stress relaxation data were …
-
Relative changes of the biomechanical properties of living rabbit brain tested under controlled physiologic conditions with stress-relaxation indentation
… Low MAP and low pCO2. The data were fitted to a generalized Maxwell model that incorporated two viscoelastic terms and one equilibrium elastic term. The relative stress-relaxation coefficients and material properties were determined, and compared using statistical analysis. Peak stresses …
-
Viscoelastic Damping of Hexagonal Honeycomb Sandwich Panels
… core are analyzed using a finite element model developed in ABAQUS. The viscoelastic material used for the base material of the honeycomb core is defined using a Prony series corresponding to the generalized Maxwell model. Damping loss factors are calculated from the ratio of energy …
-
Theories of slow dynamics: from glassy colloidal suspensions to entangled macromolecular liquids
… non-Gaussian activated ``hopping'' events by modeling motion on a dynamic free energy surface. By coarse graining over the initial separation between the tagged particles many aspects of ``dynamic heterogeneity,'' a set of phenomena accompanying the glass transition, can be understood. …
-
Viscoelastic behavior of collagen matrices in the frequency and time domain: and experimental and modeling study
… matrices are also used as three-dimensional model systems of extracellular matrix (ECM) in numerous studies of cell-ECM interactions under physiological and pathological conditions. As a biphasic material, collagen matrices contain a solid phase representing by collagen network and an …
-
MECHANISTIC CHARACTERIZATION OF RUBBERIZED ASPHALT MIXTURE AND DESIGN USING FULL SCALE TIRE-PAVEMENT FINITE ELEMENT MODELING
… and to develop and validate a finite element model of a tire-pavement structure. In this research, a generalized Maxwell model is chosen to represent the time dependent stress-strain behavior of rubberized HWMA. The dynamic modulus test results are used to calculate the viscoelastic model …
-
Numerical Studies Of Arterial Tissue Failure
… The present work aims to develop a cohesive zone model (CZM) approach for analysis and simulation of arterial tissue failure, such as plaque and fibrous cap delamination and tearing, and to validate simulation predictions with experimental results. To characterize the hysteresis phenomenon of …
-
Seismic design and evaluation of moment resisting frames using elastomeric dampers
… their behaviour.</p> <p>Based on the Generalised Maxwell Model, a new hysteretic model was developed and proposed in this thesis which is able to capture the behaviour of the material. As part of this model an equation was derived which describes the force-displacement relationship of the …
-
Analysis of Hot Mix Asphalt (HMA) Linear Viscoelastic and Bimodular Properties Using Uniaxial Compression and Indirect Tension (IDT) Tests
… HMA mixes and determined whether HMA need to be modeled as a bimodular material to analyze IDT creep compliance test results. The need to model HMA as a bimodular material is a result of a number of studies that suggest that HMA tensile and compressive properties are different. A testing program …
-
Multiscale modeling of moisture transport coupled with quality changes in selected foods
… has a great importance in describing and modeling their sorption and drying behavior. Due to complexity and dynamic nature of the drying and sorption processes, purely experimental methods are not capable of obtaining information on transport mechanisms. In other words, experimental …
-
Thermomechanical modeling of polymeric battery separators
… are still a lot of challenges with developing models for predicting failures. One such challenge is the development of accurate thermomechanical models to predict battery failure caused by combined thermal and mechanical loadings. Such thermomechanical models aim to identify the …
-
Single Cell Biomechanical Phenotyping using Microfluidics and Nanotechnology
… the application of nonlinear viscoelastic models such as Fractional Zener and Generalized Maxwell models for the naturally complex, heterogeneous, and nonlinear structure of living cells. The emerging need for a high-throughput clinically relevant alternative for evaluating biomechanics of …
Page 1 of 2