Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 77 for “"Geogrids"”.
-
Performance of flexible pavements reinforced with geogrids.
… pavement sections reinforced with glass fiber geogrids (in the asphalt base layer) showed better performance under laboratory test conditions.
-
Model testing of geogrids in unpaved roads
… geogrid at the base of the granular fill layer. Geogrids are a type of geotextile, distinguished by their relatively large aperture size. Laying out a geogrid on the surface of the ground before placing the fill layer may in many cases allow a reduced thickness of fill material to be used, and …
-
Slope reinforcement design using geotextiles and geogrids
… but can be metal or wood. Geotextiles and geogrids are collectively referred to as geosynthetics in this paper. Geosynthetic reinforcement of slopes is a relatively new option available to the civil engineer. Slope angles can be increased and 'poor' soil can be used to construct economical …
-
Pullout evaluation of uniaxial geogrids embedded in dredged material
… its interface shear strength with uniaxial geogrids. A series of laboratory pullout tests were conducted using two types of uniaxial geogrids (UX1400 and UX1700) embedded in three different soil types (Monterey Sand and two different dredged materials). The laboratory results are used to …
-
Investigating the reinforcement effect of geogrids in flexible pavements
<p>Geogrids have been increasingly used to reinforce granular base course to improve the performance of flexible pavements. In this study, different interfacial behaviors of geogrid-reinforced aggregate were investigated through laboratory experiments. Influence factors affecting the reinforcement …
-
On the comparative behaviour of geogrids in tension and pullout
… the "strain range of interest." Geotextiles and geogrids are two types of geosynthetics used for soil reinforcement; this study investigates the behaviour of geogrids exclusively. Three separate apparatuses were utilised to investigate the tensile and pullout characteristics of three commercially …
-
LABORATORY DEVELOPMENT AND MOLECULAR-SCALE SIMULATION OF SENSOR-ENABLED GEOGRIDS
… in this dissertation to develop sensor-enabled geogrids (SEGG) through laboratory experiments and molecular-scale simulations. The study yielded several formulations and production processes in the laboratory to fabricate nanocomposites that would exhibit adequate mechanical and strain-sensitive …
-
Effects of the properties of geogrids on reinforced asphalt pavements
… of high strength plastic reinforcements termed "geogrids". Since then, many more grids have been introduced into the market. These grids, made of polyester, polyethylene, polypropylene, and fibreglass, are produced in a wide range of strengths and configurations. With this large influx of new …
-
Identification of optimum aggregate gradation for transportation applications of multiaxial geogrids
The stabilizing effect of multiaxial geogrids on aggregate materials is largely influenced by the morphological properties of the aggregate, such as its size, angularity, and surface roughness, and the overall aggregate gradation. In order to evidence this phenomenon at the microscale level, a …
-
Effectiveness of geogrids in roadway construction by large scale laboratory tests
<p>Geogrids have been widely used in the roadway construction as reinforcement in pavement foundations. Geogrids have been effective in practice for reducing rutting damage, distributing traffic loads within the pavement foundation layers, increasing the resilient modulus of base course, improving …
-
Pullout evaluation of steel slag fines and dredged material blends with geogrids
… in different proportions with Tensar uniaxial geogrids to determine an optimal combination for usage in earthwork construction. The media used for testing included the individual SSF and DM materials, and the 80/20, 50/50 and 20/80 blends mixed based on dry unit weights of the individual …
-
Experimental and Computational Evaluations of Bio-Inspired Geogrids Reinforced Flexible Pavement Systems
The use of geogrids, man-made polymer grid structures, to mitigate road rutting, or permanent deformation, has significantly increased over the last decade. However, with increasing traffic loads, commercially available biaxial and triaxial geogrids do not always provide optimal solutions. There is …
-
Effectiveness of geogrids in roadway construction; determine a granular equivalent (G.E.) factor
Geogrids have been widely used in the roadway construction as reinforcement in pavement systems. Geogrids have been effective in practice for reducing rutting damage, distributing traffic loads within the pavement foundation layers, increasing the resilient modulus of base course, and stabilization …
-
Assessment of Improvement in Unpaved Roadway Performance Using 3D Geogrids Under Cyclic Loading
Geogrids have been used for decades to improve the performance in both paved and unpaved road construction. This research focuses on quantifying the performance and optimizing the design of unpaved roadways using the results from an extensive cyclic triaxial testing program. Twenty-seven cyclic …
-
Analysis of dredge materials and crushed glass blends with uniaxial geogrids in pullout tests
… based on interaction properties with uniaxial geogrids; analyze the data for trends for varying percentages of crushed glass vs. dredged materials; compare the properties of different blends with those of a well-documented uniform sand; compare the pullout data with that of previous studies …
-
Evaluating the Role of Geogrids in the Rehabilitation of Cracked Dams via Numerical Techniques
… of the arid Western United States. The use of geogrids is evaluated in this thesis as a possible solution to prevent or reduce the amount of damage to the structures from collapse and cracking. An apparatus was designed, constructed, and instrumented to electronically acquire data to evaluate …
-
Modelling Based Design and Optimization of Spider Web Inspired Geogrids in Composite Geomaterial Systems
Spider-Web Inspired Geogrids (SpiderAx) are a concept that attempts to enhance and optimize the design of polymeric geogrid structures for ground reinforcement. Geogrid reinforcement is typically used to stabilize the soil, both by interlocking the particles and by providing lateral restraint. …
-
Evaluation of mechanisms governing the stabilization of unbound aggregate bases by geogrids in flexible pavements
… quantify (empirically) the benefits of including geogrids, and for their use in the design of flexible pavements with those geogrids. However, the lack of a mechanistic understanding of geogrid-stabilization and the empirical nature of this data limited their use to the geogrids and pavement …
-
Characterization and Performance Prediction of Unbound Granular Bases with and Without Geogrids in Flexible Pavements
… as well as whether it is reinforced by geogrids. The UGMs are found to exhibit moisture-sensitive and stress-dependent nonlinear cross-anisotropic behaviors, but are not adequately characterized by existing models in pavement engineering. The primary objective of this study is to develop …
-
Evaluation of load transfer mechanisms between soil and geogrid using transparent soil
… Compared to other planar geosynthetics, geogrids develop a soil-interlocking interaction that leads to the mobilization of different types of resistance from different rib elements. The resistance mobilized by the different rib elements ultimately determine the mechanical responses for …
Page 1 of 4