Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 249 for “"Geometric Characteristics"”.

  1. Explicitly Controlling Geometric Characteristics of Corridors in Spatial Optimization

    … OCCA allows the user to control and optimize the geometric characteristics of corridors. The OCCA may be used in other applications involving route construction (e.g., vehicle routing) or barrier construction (e.g., fire break design). I illustrate the use of the OCCA on the 1,363 unit El Dorado …

    washington Repository record for Explicitly Controlling Geometric Characteristics of Corridors in Spatial Optimization (opens in a new tab)

  2. Assessment of Rockfall Deformation and Related Geometric Characteristics via Terrestrial Laser Scanning

    … assess rockfall block and post-failure scar geometric properties from 3-dimensional point cloud data, and (4) Populate a database containing deformation and geometric characteristics of past rockfalls and investigate correlations between these sets of properties. This study utilizes TLS data …

    queens Repository record for Assessment of Rockfall Deformation and Related Geometric Characteristics via Terrestrial Laser Scanning (opens in a new tab)

  3. Alternate Bars Under Steady State Flows: Time of Development and Geometric Characteristics

    … The first is to introduce new equations for the geometric characteristics, namely height and length, of alternate bars at the fully developed stage, and to evaluate them against the existing equations. The second objective is to present the results of two series of experiments carried out to …

    queens Repository record for Alternate Bars Under Steady State Flows: Time of Development and Geometric Characteristics (opens in a new tab)

  4. An experimental investigation of the geometric characteristics of flapping-wing propulsion for a micro-air vehicle

    The geometric characteristics of flapping-wing propulsion are studied experimentally through the use of a force balance and a Micro Air Vehicle (MAV) system. The system used is built to duplicate the propulsion system currently on the flying model of the Naval Postgraduate School (NPS) MAV model. …

    nps Repository record for An experimental investigation of the geometric characteristics of flapping-wing propulsion for a micro-air vehicle (opens in a new tab)

  5. Influence of Ice-covers on Stream Hydraulics and Geometric Characteristics of Alternate Bars in Rivers: an Experimental Study

    … research aims to answer is whether or not the geometric characteristics of alternate bars are altered in the presence of an ice cover, and if yes, by how much? It was found that the height and especially the length increased with the presence of an ice cover. This chapter hypothesizes that in …

    queens Repository record for Influence of Ice-covers on Stream Hydraulics and Geometric Characteristics of Alternate Bars in Rivers: an Experimental Study (opens in a new tab)

  6. Creation of controlled polymer extrusion prediction methods in fused filament fabrication. An empirical model is presented for the prediction of geometric characteristics of polymer fused filament fabrication manufactured components

    … experimentation has allowed for a data set of geometric characteristics to be built up and used to validate the model presented. The research presented draws on previous literature in the fields of additive manufacturing, machine engineering, tool-path programming, polymer science and rheology. …

    bradford Repository record for Creation of controlled polymer extrusion prediction methods in fused filament fabrication. An empirical model is presented for the prediction of geometric characteristics of polymer fused filament fabrication manufactured components (opens in a new tab)

  7. Creation of controlled polymer extrusion prediction methods in fused filament fabrication. An empirical model is presented for the prediction of geometric characteristics of polymer fused filament fabrication manufactured components

    … experimentation has allowed for a data set of geometric characteristics to be built up and used to validate the model presented. The research presented draws on previous literature in the fields of additive manufacturing, machine engineering, tool-path programming, polymer science and rheology. …

    bradford Repository record for Creation of controlled polymer extrusion prediction methods in fused filament fabrication. An empirical model is presented for the prediction of geometric characteristics of polymer fused filament fabrication manufactured components (opens in a new tab)

  8. Computational microstructure modeling of asphalt mixtures subjected to rate-dependent fracture

    … the effects of constituents and mix design characteristics (some of the key factors directly affecting the quality of the pavement structures) on the mechanical responses of asphalt mixtures. To that end, the mixtures are modeled as heterogeneous materials with inelastic mechanical behavior. …

    nebraska Repository record for Computational microstructure modeling of asphalt mixtures subjected to rate-dependent fracture (opens in a new tab)

  9. A Method for the Characterization and Selection of Compliant Joints

    … joint models which are characterized by their geometric characteristics and parametric equations. A Finite Element Analysis (FEA) simulation is used to validate each of the individual models. The selection algorithm solves the models systematically using the design requirements set by the user. …

    clemson Repository record for A Method for the Characterization and Selection of Compliant Joints (opens in a new tab)

  10. Computer generation and rendering of terrain

    … for the generation of terrain that is based on geometric characteristics is presented, as is a hybrid rendering technique.

    unlv Repository record for Computer generation and rendering of terrain (opens in a new tab) Download PDF for Computer generation and rendering of terrain (opens in a new tab)

  11. Development and Testing of A Low Cost Linear Slot Impulse Turbine

    In this thesis, an impulse turbine with geometric characteristics aimed to have significantly lower manufacturing costs than other turbines of the similar scale was investigated. Experiments were performed to ascertain rotational speeds, torque, and power the turbine was capable. The turbine was of …

    ku Repository record for Development and Testing of A Low Cost Linear Slot Impulse Turbine (opens in a new tab)

  12. Evaluation of load transfer mechanisms between soil and geogrid using transparent soil

    … soil particles and geogrids with different geometric characteristics. Laser beams with up to 350 mW output power and with a wavelength of 638 nm were adopted to allow tracking the transparent soil particles at a plane perpendicular to the soil-geogrid interface. The collimated beam resulted …

    texas Repository record for Evaluation of load transfer mechanisms between soil and geogrid using transparent soil (opens in a new tab)

  13. A Hybrid Inverse Design Method for Complex Aerodynamic and Hydrodynamic Geometries

    … was able to produce the desired aerodynamic and geometric characteristics for all the example cases. It was also able to complete each design stage in less than 10 minutes---an important consideration when using the method as a practical design tool.

    uiuc Repository record for A Hybrid Inverse Design Method for Complex Aerodynamic and Hydrodynamic Geometries (opens in a new tab)

  14. Análise não-linear física de vigas contínuas em concreto armado e protendido

    … beam with any type of section and variable geometric characteristics. An example is solved. With these results, a comparison is made with the results obtained with a linear elastic analysis for the same structure.

    brazil-uerj Repository record for Análise não-linear física de vigas contínuas em concreto armado e protendido (opens in a new tab)

  15. Application of imaging system geometric models to a synthetic image generation system

    A generalized imaging system geometric model has been incorporated into the Center for Imaging Science Digital Imaging and Remote Sensing Image Generation (DIRSIG) software system. The camera model is capable of simulating the geometric characteristics of frame cameras, line scanners and pushbroom …

    rit Repository record for Application of imaging system geometric models to a synthetic image generation system (opens in a new tab)

  16. Predictive Modelling of Energy Consumption in Melbourne by Using Energy Simulations and Passive Design Approaches in Residential Buildings

    … energy consumption model and optimizes geometric parameters of single-story residential buildings in Melbourne through energy performance simulation within a Performative Computational Architecture (PCA) framework. The main method of this research adopts a quantitative approach, …

    vu-aus Download PDF for Predictive Modelling of Energy Consumption in Melbourne by Using Energy Simulations and Passive Design Approaches in Residential Buildings (opens in a new tab)

Page 1 of 13