Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"Geometrically Necessary Dislocation"”.

  1. Characterization of Geometrically Necessary Dislocation Content with EBSD-Based Continuum Dislocation Microscopy

    … by the difficulty in accurately characterizing dislocationdensity on the microscale for real samples. It is particularly difficult to resolve measureddislocation content onto individual dislocation systems at the length scales most commonly of interestin plasticity studies. Traditionally, …

    byu Repository record for Characterization of Geometrically Necessary Dislocation Content with EBSD-Based Continuum Dislocation Microscopy (opens in a new tab) Download PDF for Characterization of Geometrically Necessary Dislocation Content with EBSD-Based Continuum Dislocation Microscopy (opens in a new tab)

  2. Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition

    … both macroscopic strain analysis and microscopic dislocation motion analysis was achieved. The current study is comprised of three manuscript chapters. The Mode I fracture testing of Zr foils under plane-stress conditions is discussed in Chapter 3. Using conventional fracture testing combined with …

    queens Repository record for Mode I Fracture Testing on Zirconium Foils Under Plane-stress Condition (opens in a new tab)

  3. Studies of Dislocation Density Quantification Via Cross-Correlation EBSD

    One conventional method for studying dislocations uses the Transmission Electron Microscope (TEM), a complex and expensive piece of equipment which requires extensive specimen preparation in order to thin the specimens to electron transparent thickness. Newer High Resolution Electron Backscatter …

    byu Repository record for Studies of Dislocation Density Quantification Via Cross-Correlation EBSD (opens in a new tab) Download PDF for Studies of Dislocation Density Quantification Via Cross-Correlation EBSD (opens in a new tab)

  4. QUANTIFYING THE EVOLUTION OF STRENGTHENING MECHANISMS FOR COMMERCIALLY PRODUCED NIOBIUM AND TITANIUM HSLA STEEL SHEET

    … strengthening, Hall-Petch strengthening, dislocation strengthening, and solute strengthening have all been studied in literature independently, the interactions of these mechanisms with each other and coiling temperature in a commercial production setting is not completely understood. The …

    mtu Repository record for QUANTIFYING THE EVOLUTION OF STRENGTHENING MECHANISMS FOR COMMERCIALLY PRODUCED NIOBIUM AND TITANIUM HSLA STEEL SHEET (opens in a new tab)

  5. Modelling micromechanical damage of fusion reactor materials

    … developed to model plastic deformation through Geometrically Necessary Dislocation (GND) densities. The code includes internal physical mechanisms for a more accurate GND calculation, which prevents erroneous hardening.<br><br>This framework was then applied to model the Bauschinger effect in …

    oxford Repository record for Modelling micromechanical damage of fusion reactor materials (opens in a new tab)

  6. The morphology and microstructure of dynamic abnormal grain growth in commercial-purity molybdenum

    … diffraction (EBSD). A new method to evaluate geometrically necessary dislocation densities using EBSD data is derived. DAGG grains are relatively undeformed compared to the polycrystalline microstructure. DAGG grains are not oriented either favorably or unfavorably for slip. Results of the …

    texas Repository record for The morphology and microstructure of dynamic abnormal grain growth in commercial-purity molybdenum (opens in a new tab)

  7. Characterization of Strain Rate Sensitivity, Plastic Anisotropy, and Dislocation Content in Zircaloy-2

    … developed Matlab computer code for calculating geometrically necessary dislocation density from electron backscattering diffraction data. The code is applied to measurements performed on the samples from Chapter 3, and validated against an established state of the art technique for measuring …

    queens Repository record for Characterization of Strain Rate Sensitivity, Plastic Anisotropy, and Dislocation Content in Zircaloy-2 (opens in a new tab)

  8. High-Resolution Characterization of Micro-Scale Crack Tip Fields in Zirconium

    … Experimental Details. In Chapter IV, localized geometrically necessary dislocation (GND) densities are estimated using HR-EBSD as an indirect measure of plastic deformation ahead of a microscale crack tip. The advantages of HR-EBSD in measuring fine-scale dislocation structures are also …

    queens Repository record for High-Resolution Characterization of Micro-Scale Crack Tip Fields in Zirconium (opens in a new tab)

  9. Micro-deformation and texture in engineering materials

    … Modelling slip demands that one also models dislocations since slip is assumed to occur by the movement of dislocations. In this project a model for geometrically necessary dislocations has been developed and validated against experimental measurements.</p> <p> A texture homogenisation …

    oxford Repository record for Micro-deformation and texture in engineering materials (opens in a new tab)

  10. Crystal Plasticity Finite Element Models for Predicting Deformation and Twinning in Polycrystalline Magnesium Alloys

    … the underlying heterogeneous deformation due to dislocation slip and deformation twinning on different crystallographic systems. In the polycrystalline microstructure, the twin formations lead to strain localization and initiation of short cracks. Reliable prediction of mechanical response and …

    jhu Repository record for Crystal Plasticity Finite Element Models for Predicting Deformation and Twinning in Polycrystalline Magnesium Alloys (opens in a new tab)

  11. Examination of deformation in magnesium using instrumented spherical indentation

    … Further, a detailed analysis of the residual geometrically necessary dislocation populations in the deformation zone was conducted based on the EBSD data. It was found that residual basal <a> dislocations were dominant in the deformation zone. This was consistent with crystal plasticity finite …

    ubc Repository record for Examination of deformation in magnesium using instrumented spherical indentation (opens in a new tab) Download PDF for Examination of deformation in magnesium using instrumented spherical indentation (opens in a new tab)

  12. Micromechanical studies of ultrasonic fatigue in Ti-6Al-4V

    … bias in lattice rotation gradient and geometrically necessary dislocation (GND) density calculations, producing more physically consistent strain and GND maps. This framework was applied to interrupted fatigue experiments, enabling direct observation of elastic strain and dislocation …

    oxford Repository record for Micromechanical studies of ultrasonic fatigue in Ti-6Al-4V (opens in a new tab)

  13. Multiscale Characterization of Dislocation Development During Cyclic Bending Under Tension in Commercially Pure Titanium

    … uses high resolution EBSD characterization of geometrically necessary dislocation (GND) density together with X-ray diffraction (XRD)-based evaluations of total dislocation density and in-plane digital image correlation (DIC) to provide an in-depth analysis of through-thickness dislocation …

    byu Repository record for Multiscale Characterization of Dislocation Development During Cyclic Bending Under Tension in Commercially Pure Titanium (opens in a new tab) Download PDF for Multiscale Characterization of Dislocation Development During Cyclic Bending Under Tension in Commercially Pure Titanium (opens in a new tab)

  14. A Hybrid Bishop-Hill Model for Microstructure Sensitive Design

    … of HBH model is discussed by introducing geometrically necessary dislocation (GND) densities in addition to the crystal orientations procedure in standard microstructure-based method. The correlations between crystal orientations and GND densities are studied. The shape of the yield …

    byu Repository record for A Hybrid Bishop-Hill Model for Microstructure Sensitive Design (opens in a new tab) Download PDF for A Hybrid Bishop-Hill Model for Microstructure Sensitive Design (opens in a new tab)

  15. Stress Partitio I G I Fcc Thi Metal Films With Mixed Texture

    … analysis allowed the plastic strain and the geometrically necessary dislocation density in each texture component to be determined throughout the temperature cycle. Again, results are quite different from those found following the biaxial assumption. Finite element simulations of stress …

    cornell Repository record for Stress Partitio I G I Fcc Thi Metal Films With Mixed Texture (opens in a new tab)

  16. The microstructure-processing-property relationships in an Al matrix composite system reinforced by Al-Cu-Fe alloy particles

    … coefficient of thermal expansion (CTE) and the geometrically necessary dislocation (GND) effects suggest that these strengthening mechanisms can be combined to predict accurately the strength of the composites.;By neutron diffraction measurements, it also was found that the composites …

    iastate Repository record for The microstructure-processing-property relationships in an Al matrix composite system reinforced by Al-Cu-Fe alloy particles (opens in a new tab)

  17. A high resolution electron backscatter diffraction study of heterogeneous deformation in polycrystal copper

    … experimental results at mesoscale to correlate dislocations and microstructure features are limited.</p> <p>This thesis furthers the High Resolution EBSD (HR-EBSD) technique in Geometrically Necessary Dislocation (GND) density measurement from qualitative analysis with a typical map size of 100 …

    oxford Repository record for A high resolution electron backscatter diffraction study of heterogeneous deformation in polycrystal copper (opens in a new tab)

  18. The relations between thermodynamics, nanostructure, hardening and stability of an Al-Cu-Mg alloy processed by high pressure torsion

    … method and Williamson-Hall method shows that the dislocation density increases significantly due to severe plastic deformation, which contributes to the increase of strength. APM reveals the presence of nanoscale co-clusters and defect-solute clustering. The relation between peak temperature for S …

    soton Download PDF for The relations between thermodynamics, nanostructure, hardening and stability of an Al-Cu-Mg alloy processed by high pressure torsion (opens in a new tab)

  19. Dislocation Density-Based Finite Element Method Modeling of Ultrasonic Consolidation

    A dislocation density-based constitutive model has been developed and implemented into a crystal plasticity quasi-static finite element framework. This approach captures the statistical evolution of dislocation structures and grain fragmentation at the bonding interface when sufficient boundary …

    utahstate Repository record for Dislocation Density-Based Finite Element Method Modeling of Ultrasonic Consolidation (opens in a new tab)

Page 1 of 2