Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 111 for “"Geophones"”.

  1. Orientation Azimuth Calibration of Borehole Geophones

    … the orientation calibration of borehole geophones were investigated. Well deviation, lateral raybending and anisotropy were all found to produce systematic deviations in orientation analysis. A method was developed to compensate for effects due to a deviated well, and successfully applied …

    calgary Repository record for Orientation Azimuth Calibration of Borehole Geophones (opens in a new tab)

  2. Microphone suppression of air-noise on geophones

    Air-noise in seismic records creates a loss in signal quality, reducing seismic image clarity. A microphone may be used to estimate and remove air-noise in seismic records. This thesis covers the characterization of air-noise on a prototype 4-Component geophone (3-C geophone plus microphone), as …

    houston Repository record for Microphone suppression of air-noise on geophones (opens in a new tab)

  3. Comparison of 4.5 Hz Geophones and a Broadband Seismometer in a Real Field Deployment

    … density and array responses was performed using geophones and broadband seismometers, co-deployed as part of a geologically motivated study. Broadband seismometers record excellent waveforms but, due to cost and deployment effort, wavefields are usually spatially aliased above ~0.1 Hz. Industry …

    vt Repository record for Comparison of 4.5 Hz Geophones and a Broadband Seismometer in a Real Field Deployment (opens in a new tab)

  4. Structural Health Monitoring and Damage Identification of Bridges Using Triaxial Geophones and Time Series Analysis

    … data was recorded using an array of triaxial geophones, highly sensitive sensors to record vibrations, in healthy and damaged conditions of the bridges. The vibration data is evaluated using linear stationary time series models to extract damage sensitive-features (DSFs) which are used to …

    utk-theses Repository record for Structural Health Monitoring and Damage Identification of Bridges Using Triaxial Geophones and Time Series Analysis (opens in a new tab)

  5. Non-intrusive bridge weigh-in-motion: integrating geophones and strain sensors for accurate vehicle characterization.

    … bridge health. The proposed BWIM system combines geophones and strain sensors to accurately determine axle loads, axle spacing, and Gross Vehicle Weight (GVW) in regular traffic flow. The research methodology consists of bridge span instrumentation, data acquisition, processing, storage, and …

    manitoba Repository record for Non-intrusive bridge weigh-in-motion: integrating geophones and strain sensors for accurate vehicle characterization. (opens in a new tab)

  6. Structural Health Monitoring and Damage Evaluation of Full-Scale Bridges Using Triaxial Geophones: Controlled In-Situ Experiments and Finite Element Modeling

    … vibration records obtained using inexpensive geophones during in-situ, full-scale, damaged bridge tests.</p> <p>Geophones are passive directional sensors and much cheaper than accelerometers which are typically used for structural vibration measurements. However, magnitude and phase errors …

    utk-theses Repository record for Structural Health Monitoring and Damage Evaluation of Full-Scale Bridges Using Triaxial Geophones: Controlled In-Situ Experiments and Finite Element Modeling (opens in a new tab)

  7. A Study Regarding the Application of the Refraction Microtremor (ReMi) Process in an Underground Mining Environment.

    … acquiring noise data along a linear array of geophones. Data is processed to obtain shear-wave velocities underneath the array. The data for our study was collected at an underground gold mine in Nevada, and was analyzed using the SeisOpt® ReMi(TM) (© Optim, 2015). The data was collected using …

    unr Repository record for A Study Regarding the Application of the Refraction Microtremor (ReMi) Process in an Underground Mining Environment. (opens in a new tab)

  8. Retrieving Low Frequency Signals from Converted Waves Data of The Blackfoot Field, Canada

    … commercial seismic data is acquired using 10 Hz geophones, obtaining low-frequency signals is critical for many imaging methods such as full waveform inversion. In this study, I show to retrieve low-frequency converted waves acquired by 10 Hz geophones in the Blackfoot field in Alberta, Canada, …

    houston Repository record for Retrieving Low Frequency Signals from Converted Waves Data of The Blackfoot Field, Canada (opens in a new tab)

  9. Wireless Systems for Energy-Efficient Data Acquisition and Position Estimation in Wide Area Networks

    … is expected from thousands of devices called geophones, that are deployed across very large areas to obtain images of the Earth's subsurface. The data is processed at the sink node and employed in earthquake detection, oil and gas exploration, and urban planning. This thesis provides the …

    gatech Repository record for Wireless Systems for Energy-Efficient Data Acquisition and Position Estimation in Wide Area Networks (opens in a new tab)

  10. Development of a Seismic Snow Streamer and Use of Multi-Offset Reflection for Determining Glacier Ice Properties

    … intensive process of manually hand planting geophones. In order to improve the efficiency of active source seismic reflection data acquisition in polar environments, two prototype seismic snow-streamers were constructed for this investigation and optimized for deployment in remote locations. …

    ku Repository record for Development of a Seismic Snow Streamer and Use of Multi-Offset Reflection for Determining Glacier Ice Properties (opens in a new tab)

  11. An energy-efficient channel access protocol for wireless seismic data acquisition

    … clustering for orthogonal deployment of geophones is also considered, and the impact of co-channel interference is analyzed. Furthermore, power-saving schemes are analyzed to extend the battery life of the geophones. The proposed scheme outperforms the default standard in terms of both …

    gatech Repository record for An energy-efficient channel access protocol for wireless seismic data acquisition (opens in a new tab)

  12. The Effect of Low Frequencies on Seismic Data in Theory and a West Texas Case Study

    … line in West Texas with collocated conventional geophones (10Hz) and low-frequency geophones (5 Hz) investigates the additional coherent frequency content from use of low-frequency geophones and the value of the associated extension of the frequency band. This analysis was performed through a …

    houston Repository record for The Effect of Low Frequencies on Seismic Data in Theory and a West Texas Case Study (opens in a new tab)

  13. Dense Array Seismic Imaging of Earth's Crust Using Active and Passive Sources

    … active source seismic data recorded by ~1000 geophones that were acquired over the legacy HADDOCK nuclear test at the Nevada National Security Site. Using seismic reflection and refraction methods, we image the partially collapsed post-detonation structure to better understand the velocity …

    unm Repository record for Dense Array Seismic Imaging of Earth's Crust Using Active and Passive Sources (opens in a new tab)

  14. Sources and receivers with the seismic cone test

    … investigated were horizontal and vertical geophones and accelerometers. The hammer shear source used previously with the seismic cone (Rice, 1984), was used as a standard for comparison. The hammer P-wave source was not used successfully with the seismic cone, because the vertical receivers …

    ubc Repository record for Sources and receivers with the seismic cone test (opens in a new tab) Download PDF for Sources and receivers with the seismic cone test (opens in a new tab)

  15. Numerical modeling of ambient noise seismic interferometry

    … effect on the reflection quality, but buried geophones produce ghost reflections, suggesting that shallow geophones might be optimal. Shallow noise sources produce a destructive effect on the reflections from deeper noise sources and damage the resulting image.

    mtu Repository record for Numerical modeling of ambient noise seismic interferometry (opens in a new tab)

  16. Seismic refraction analysis of East River Flats, Minneapolis, Minnesota

    … using Geometrics SmartSeis seismograph and 16 geophones. Refraction calculations and models were done using 1D and 2D time-term inversion methods. The results yielded a 3 layer model which consisted of a low velocity top soil, water saturated sand and gravel, and highly fractured Platteville …

    umn Repository record for Seismic refraction analysis of East River Flats, Minneapolis, Minnesota (opens in a new tab)

  17. Time-lapse multicomponent geophone and DAS VSP processing and analysis

    … zero-offset and walkaway recorded on both geophones and DAS, and a 3D survey recorded only by DAS. This project focuses on reprocessing and analyzing the various datasets to evaluate the differences between the geophone and DAS VSP surveys and to analyze the time-lapse changes from …

    colo-mines Repository record for Time-lapse multicomponent geophone and DAS VSP processing and analysis (opens in a new tab)

  18. Multicomponent seismic image matching and comparison - Fasken Ranch, Andrews County, Texas

    … vibrator source and recorded with vertical geophones. This new concept allows shear wave information to be extracted from seismic surveys that have been recorded without the use of 3-component geophones or horizontal vibrators. Accordingly, this study will serve as one of the first case …

    texas Repository record for Multicomponent seismic image matching and comparison - Fasken Ranch, Andrews County, Texas (opens in a new tab)

  19. Enhancing bridge weigh-in-motion system by accurate observation of the velocity and axle spacings of moving truck using a geophone sensor

    … This paper explores a new methodology utilizing geophones to estimate the velocity, number of axles, axle spacings, and individual axle weights of loads moving over a bridge. The main finding is that geophones can accurately determine the truck velocity and axle spacing based on the test data set …

    manitoba Repository record for Enhancing bridge weigh-in-motion system by accurate observation of the velocity and axle spacings of moving truck using a geophone sensor (opens in a new tab)

  20. Using direct S-wave seismic modes for reservoir characterization in Wellington Field, Kansas

    … that vertical-vibrator SV-P data from vertical geophones work as good as P-SV seismic data from horizontal geophones to estimate reservoir properties, and provide better subsurface resolution than do SV-P data generated by a horizontal vibrator. These results validate that direct S-wave data …

    texas Repository record for Using direct S-wave seismic modes for reservoir characterization in Wellington Field, Kansas (opens in a new tab)

Page 1 of 6