Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Geotechnical Laboratory testing"”.
-
Benzene losses from aqueous solutions during geotechnical laboratory testing
… the problem of using volatile organics in geotechnical laboratory tests. Previous experiments with volatile organics such as benzene and trichloroethylene with soils had shown significant concentration losses during the tests. The purpose of the study was to identify the sources of loss and …
-
Feasibility of Additive Manufactured Materials for Use in Geotechnical Laboratory Testing Applications
… analogue soil sample can then be used in a laboratory setting. A preliminary investigation was carried out to identify the various AM technologies available and their associated materials. After examining the strength and stiffness characteristics of the various materials, two separate AM …
-
Geotechnical Laboratory Testing for 2-D FEM Analysis of Geomorphic and Planar Sloped Caps and Covers for Sustainable Mine Refuse Deposition
… of grass on the Royal Scot site. A suite of geotechnical laboratory testing was performed including, classification of the coarse coal refuse, compaction, permeability, and strength testing. The results showed that the compacted CCR could perform as a hydraulic barrier to reduce infiltration …
-
Hydraulic and mechanical response of base course aggregate with recycled glass particles
… in Quebec. Reusing recycled material in the geotechnical engineering and roadwork has proved a great attraction. However, insufficient knowledge about mechanical characteristics of recycled glass as an aggregate and the shortage of information about the benefit of using it as the aggregate in …
-
Improvement of seismic site response analysis for small- and large-strain motions
Small-strain damping profiles developed from geotechnical laboratory testing have been observed to be smaller than the damping inferred from the observed site amplification from downhole array recordings. On the other hand, several studies have shown that current site response procedures …
-
Geotechnical testing and Finite Element Modeling of Geomorphic Landform Design with a Multi-Layer Cap and Cover System
… with short paper fiber. Second, a suite of geotechnical laboratory testing was completed on the materials to be used in the construction. Third, the cap and cover system was designed based on the measured geotechnical parameters. Fourth, the cap and cover system was applied to three …
-
Characterization of Soft Clay and Clay-tire Interaction for the Prediction of Ground Mobility
… experimental data from small-scale soil testing, large-scale soil-tire interaction testing, and advanced physics-based numerical simulation techniques. In particular, this thesis attempts to characterize the clay-tire interface by conducting large-scale direct shear tests. In addition to …
-
Laboratory Self-Weight Consolidation Testing of Dredged Material Analyzed Using a One-Dimensional Finite Strain Consolidation Method
… in a dredged layer, which can be determined from laboratory testing. The United States Army Corps of Engineers (USACE) suggests using a self-weight consolidation test apparatus to obtain void ratio/effective stress conditions for very low effective stresses. In this paper a modified laboratory …