Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"Gettering"”.
-
IMPURITY GETTERING BY PHOSPHOROUS DOPING IN SILICON WAFERS
In this project, the effect of phosphorous gettering with inline diffusion furnace was studied. Experiments were performed on normal grade A1 wafers as well as a block of laser-marked wafers. The result of the experiment with A1 wafers showed a 0.05% drop in efficiency. However, gains were seen for …
-
Heterogeneous precipitation and internal gettering efficiency of iron in silicon
… a model which quantitatively describes internal gettering results of iron under various supersaturation levels. The experimental work is used to verify the model. The results of this thesis indicate that the initial iron concentration level has a major impact on gettering efficiency and a high …
-
Iron gettering in silicon using doped layers and bulk defects
… and boron doped layers and bulk defects as gettering sites. Techniques to remove metal impurities, so-called gettering techniques, are needed for improving the performance of both the microelectronic and photovoltaic silicon devices, although the desired location of impurities may be …
-
Boron and phosphorus diffusion gettering: Efficiency, mechanisms and applicability to silicon solar cells
… the level of understanding of different impurity gettering techniques in silicon, especially from solar cell point-of-view. Experiments made with single crystalline silicon provide new data for both boron diffusion gettering (BDG) and phosphorus diffusion gettering (PDG). In the case of PDG, the …
-
Impurity and defect mitigation for silicon photovoltaics
… have been studied. </p> <p>Firstly, saw damage gettering which is designed to remove impurities from low quality silicon wafers which may have otherwise been discarded. Saw damage gettering removes impurities from the active region of the solar cell by capturing them in a surface region which …
-
Application of Gettering Layers for Low Temperature Conversion of Magnetic Oxides into Ferromagnetic Metals in Thin Films, Multilayers, and Nanostructured Arrays
… annealing in the presence of tantalum (Ta) gettering layers. Thin film of CoO sandwiched between Ta seed and capping layers can be effectively reduced to a magnetic Co thin film by annealing at 200◦C, whereas CoO does not exhibit ferromagnetic properties at room temperature and is stable at …
-
Investigation of Room Temperature Soft Ferromagnetism in Indium Phosphide Substrate Synthesized via Low Energy Nickel Ion Implantation
… we have utilized an ion beam process known as gettering to migrate implanted Ni ions much deeper into the bulk substrate than their initial projected end of the range. The projected mean depth is known as Rp. The gettering effect is the most crucial part of the fabrication and we have found …
-
Multiscale Modeling of Defect Generation and Diffusion in Semiconductor Materials
… limit carrier lifetime. Modern devices require gettering processes to remove metals from active device region. We have built a model for the phosphorus diffusion gettering behavior of various metal species. Calculation results are in agreement with experimental gettering behavior and provide …
-
On the light-activation of copper impurities in crystalline silicon: root cause analysis and applications for fast high-resolution imaging
… emitters provide insights into the effect of gettering on the strength of Cu-LID. It is found that in specimens with a phosphorus-diffused emitter significant suppression of Cu-LID is achievable through the addition of a slow cooling tail after high-temperature anneals. On the other hand, in …
-
Material and process engineering for cost-effective silicon technologies
… are provided by developing boron implantation gettering strategies for high-performance n-type silicon solar cells and by studying the applicability of QM‑Si beyond photovoltaics. The first challenge that the thesis addresses is related to the low ingot yield caused by impurities present in …
-
Defect engineering in black silicon
… by b-Si. The nanostructures are shown to enhance gettering of detrimental metal impurities. Indeed, intentionally iron-contaminated b-Si wafers have more than three times higher minority carrier lifetime than polished samples after gettering (720 µs vs. 200 µs). In addition to impurity gettering, …
-
Controlling iron and copper precipitation in silicon wafers
… contamination levels are used to study the iron gettering behavior at varying supersaturation levels. It was found that the gettering efficiency depends strongly on the initial iron concentration and considerably high supersaturation is needed to initiate the gettering. The results are discussed …
-
Performance Optimization of Lifetime Sensitive Devices Based on Coupled Optical, Process, and Device Modeling
… in the process modeling, was on the gettering of transition metals. The competitive gettering of metal impurities (Cu, Ni, Fe, Mo, and W) by boron doped, phosphorus doped regions, and dislocation loops was modeled. Ab initio density functional theory calculations were first performed …
-
Carrier Recombination in Multicrystalline Silicon: A Study using Photoluminescence Imaging
… and also their response to phosphorus gettering and hydrogenation. The work is then extended to various types of multicrystalline silicon materials. The electrical properties of conventionally solidified p-type, n-type and also recently developed high performance p-type multicrystalline …
Page 1 of 3