Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Girders--Testing"”.
-
Forced, nonlinear, planar and nonplanar oscillations of a cantilvered beam including static deflection
In this dissertation, the response of a slender, elastic, cantilevered beam to a simple harmonic excitation is investigated. The effects of nonlinear curvature, nonlinear inertia, viscous damping and static load are included. The nonlinear equations governing the motion of the beam are derived by …
-
Direct determination of stiffness factor and carry-over factor for parabolic haunched beams
In this study equations are developed for the direct determination of stiffness factor and carry-over factor for parabolic haunched beams. the conventional methods require long and tedious calculations, so the development of these equations, which require only the direct substitution of the …
-
Experimental studies on the limit analysis of reinforced concrete fixed-ended T-beams
Results are presented on tests of reinforced concrete T-beams with a flange 20 inches wide by two inches thick setting on a stem five inches deep and four inches wide. These beams were loaded at the quarter points of an eight-foot span and also at the end of cantilever sections of two feet. The …
-
Finite element formulation of a thin-walled beam with improved response to warping restraint
Linear elastic theory of torsion and flexure of thin-walled beams as developed by Vlasov and Timoshenko respectively are well known and commonly used in everyday engineering practice. However there are noticeable differences between calculations and experimental results. The difference is partly …
-
Calibration of a beam testing machine
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1926
-
Display of finite element beam stresses
In this thesis, a computer program for graphically displaying finite element beam stresses is discussed. Beam elements are represented as thick lines with colored stress contours along the length. Stress gradients through the beam thickness are not displayed. Many program options are available to …
-
The reflection method in the bending of beams and plates
The problem of determining the deflection and stress in a plate under transverse loading can be approached by first considering the plate to be a portion of an infinite plate, ignoring the prescribed boundary conditions. The known loads are then applied to the infinite plate and their effects are …
-
Fatigue tests of slender-web hybrid plate girders under combined moment and shear
… of thirteen slender-web welded hybrid plate girders are described. The girders were tested under loading that produced a maximum flange stress of 50 ksi and a shear stress of about 12. 5 ksi. The girder flanges were constructional alloy steel with a minimum yield point of 100 ksi, and the …
-
3-D finite element beam/connector model for a glulam dome cap
The purpose of this study is to model the beam/decking connectors (nails) of a glulam dome cap by beam/connector elements, and to analyze various dome cap models in order to investigate the potential of the beam/connector model to simulate the decking. Two- and three-dimensional beam/connector …
-
Parametric spatial modal analysis of beams
Modal analysis is the experimental characterization of the dynanlical behavior of a structure. Recent advances in laser velocimetery have made available to the experimentalist a rich, new source of vibration data. Data can now be obtained from many different spatial locations on a structure. A …
-
Enhanced induced strain actuator performance through discrete attachment to structural elements
In intelligent structures, structural deformation is generally controlled by either embedding or surface bonding the induced strain actuator to the structure. With bonded or embedded actuators used for inducing flexure, the developed in-plane force contributes indirectly through a locally-generated …
-
Web crippling of hot-rolled beams at stiffened-seat connections
… for interior web crippling of short-span plate girders. Yield-line theory and the mechanism solution were used to derive an expression for the web crippling capacity of a plate girder subjected to an interior patch load. The general form of this equation was then calibrated using available data …
-
Anchorage of beam reinforcement at conventional and fibrous beam-column connections
Thesis (Ph. D.)--Michigan State University. Department of Civil and Environmental Engineering, 1988
Page 1 of 2