Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 57 for “"Glass Powder"”.
-
Mechanical Properties and Cracking Potential of Alkali-Activated Materials containing Waste Glass Powder
… widely available SCMs. One of such materials is glass that has an annual production around 100 million tons, but due to the high energy consumption in recycling glass, the glass industry has a low recycling rate (about 26%). The use of ground waste glass as a SCM can have substantial energy and …
-
Feasibility assessment of manufacturing green concrete by combination of wastewater and glass powder
A indústria da construção enfrenta uma crise global impulsionada pela escassez de água, pelas emissões de gases com efeito de estufa e pela exaustão de matérias-primas. Em resposta, a reutilização e reciclagem de resíduos líquidos e sólidos têm emergido como estratégias práticas e inovadoras rumo à …
-
CHARACTERIZATION AND MECHANICAL AND SHRINKAGE PERFORMANCE OF GLASS POWDER/CALCIUM MODIFIED METAKAOLIN-BASED GEOPOLYMER
… to investigate the effects of added calcium or glass powder on the phase formation, development of micro/atomic structure and mechanical/durability performance of metakaolin-based geopolymer. The correlation between the calcium contents and the formation process of the geopolymeric gel was …
-
Valorizing Cement Kiln Dust and Glass Powder: A Binder Study on Sustainable Partial Cement Replacement
… system which uses Cement Kiln Dust (CKD) and Glass Powder (GP) to replace a portion of Type IL (Portland Limestone) cement. The mixes were made with a fixed water-to-binder ratio of 0.44 and contained 15% GP by mass while the CKD content ranged from 0% to 10%. The fresh paste properties were …
-
Simulating Chemical Reactions of Glass Powder in Cement Using Silica, Calcium Hydroxide and Sodium Hydroxide
… that possess pozzolanic properties. Recycled glass powder, classified as a SCM, when added as a cement replacement reacts with the available lime in the cement to form calcium silicate hydrate (C-S-H) products. In contrast with other SCMs, glass is siliceous and thus the reaction can also …
-
Assessment of Various Natural Pozzolans, Recycled Glass Powder, and Reclaimed Fly Ash as Supplementary Cementitious Materials for Concrete Mixtures
… earth (DE), pumice, wollastonite, recycled glass powder (RGP), and reclaimed fly ash (RFA), all sourced from North America. The research first explored the effect of these SCMs in cement paste and mortar, when used at 20% by weight of cement, with DE at 10%. The rheology and heat of reaction …
-
PERFORMANCE EVALUATION OF USING WASTE GLASS POWDER AND FLY ASH IN ALKALI-ACTIVATED SLAG BINDER AND MORTAR SAMPLES AS PARTIAL PRECURSORS
… burden at landfills due to the disposal of waste glass has motivated the scientific community to find an alternative for its utilization. One of these promising routes is to use glass powder (GP) as precursor and waste glass sands as sand replacement in alkali-activated slag (AAS) mortar to reduce …
-
INVESTIGATION INTO MECHANISMS AND MITIGATION OF ALKALI-SILICA REACTION IN SUSTAINABLE PORTLAND CEMENT CONCRETE CONTAINING RECYCLED GLASS MATERIALS
A significant portion of recycled glass from municipal waste streams is not found to be suitable for reuse as cullet in the production of new glass containers, and as a result it is disposed in landfills. One of the appropriate ways to reduce the disposal of waste glass in landfills is by using it …
-
Effects of Waste Glass and Polymer Addition on the Performance of Concrete Masonry Blocks
… replacement of cement with post -consumer waste glass powder and/or the replacement of fine aggregate with post-consumer waste polymer in the production of concrete blocks are proposed as potential options to reduce the environmental impact of block production while maintaining adequate block …
-
Mechanochemical activation of supplementary cementitious materials through the intergrinding of impure kaolinitic clay and alkalis
… and an alkali waste product, soda-lime waste glass powder, to improve the pozzolanic performance of mechanochemically activated clays. MCA was found to reduce crystallinity and depolymerize silica bonds in clay more efficiently than calcination. Intergrinding with sodium silicate reduced the …
-
Use of waste glass as aggregate and cement replacement in concrete
Nafisa Tamanna studied the use of waste glass as sand and cement replacement in concrete. She found that the addition of glass sand and glass powder can be a good substitute for natural sand and cement, respectively. Cairns Regional Council has successfully implemented her research on their …
-
Development of an eco-friendly composite material for engineering applications
… is to assess the performance of flax fibre/waste glass cement composites. Flax fibres are used to reinforce two systems. The first system contains Ordinary Portland Cement (OPC) only as a binder while in the second system a part of OPC is replaced by finely ground waste glass powder. The fibre …
-
Characterizing and Modeling of Curing, Compressive, Piezoresistivity, and Strength of Smart Cement with Recycled Glass and Plastic Powders
… of incorporating commercially available recycled glass powder and recycled plastic powder into smart cement, a material known for its piezoresistive properties and has the potential for use in infrastructure applications such as bridges and oil wells. While smart cement provides valuable real-time …
-
Processing of fluoro alumino-silicate glass-ceramics by Field Assisted Sintering Technology and honeycomb extrusion technique
… was used for the crystallisation of ionomer glasses and the production of the relevant glass ceramics. Extrusion was also used as an alternative processing method to produce honeycomb glass ceramics derived from similar glass compositions. Apatite-mullite glass ceramics derived from the …
-
Low Melting Temperatures Glasses for Lunar Applications Using Additive Manufacturing Process
… high mechanical properties. Recycled soda-lime glass powders were used to study the feasibility of printing and processing glass materials using additive manufacturing process, in this case was binder jetting. The printed glass samples shows translucent sign and maintained compositions and …
-
Binder Jet Additive Manufacturing of Recycled Glass for Composite Tooling Applications
This study investigates the use of recycled glass powder as a sustainable feedstock for binder jet additive manufacturing (BJAM) of tooling used in carbon fiber composite molding. The goal was to evaluate whether post-processed glass-based tooling could achieve the surface finish, dimensional …
-
Synthesis and Characterization of Bulk Metallic Glasses, Composites and Hybrid Porous Structures by Powder Metallurgy of Metallic Glassy Powders
Metallic glasses exhibit many attractive attributes such as outstanding mechanical, magnetic, and chemical properties. Due to the absence of crystal defects, metallic glasses display remarkable mechanical properties including higher specific strength than crystalline alloys, high hardness and …
-
Processing of Advanced Infrared Materials
Infrared transparent glassy and crystalline materials often have unique and complex processing requirements but are an important class of materials for such applications as optical windows, lenses, waveplates, polarizers and beam splitters. This thesis investigates two specific materials, one …
-
Roxithromycin : a solubility and stability study
… the superior solubility of the roxithromycin glass (prepared through quench cooling) and amorphous forms (desolvation of solvates) over the roxithromycin monohydrate in water. The solubility in water improved in the order of roxithromycin monohydrate < roxithromycin glass < roxithromycin glass …
-
Effect of rigid crystals on the experimental sintering of rhyolitic ash under shallow conduit conditions
… minutes to 9 hours. A 50/50 mixture of rhyolitic glass powder (<45 μm) and quartz crystals, in three distinct size distributions, were used: 250 - 500 µm, 90 - 125 µm, and 45 - 76 μm. All samples evolved similarly, from loose, cohesion-less particles to sintered particles forming a friable, …
Page 1 of 3