Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"Green density"”.

  1. Investigating the heat-treatment process for 316L alloy powders with the application in binder jetting metal additive manufacturing

    … is the porosity left after sintering the green parts. This strongly depends on the sinterability of the metal powder. Therefore, this thesis focuses to evaluate the effect of powder particle size distribution (PSD), green density of printed samples and thermal treatment on the …

    waterloo Repository record for Investigating the heat-treatment process for 316L alloy powders with the application in binder jetting metal additive manufacturing (opens in a new tab)

  2. Investigating the Effect of Printing Parameters and Green-Sintered Relationship in Metal Fused Filament Fabrication Additive Manufacturing Technology Using Bronze

    … research, mostly focusing on the feasibility, green part characteristics, and green density. This research tries to address the gap and study the green and sintered properties and the green-sintered relationship. The research also investigates the effect of printing parameters: layer thickness, …

    tamu Repository record for Investigating the Effect of Printing Parameters and Green-Sintered Relationship in Metal Fused Filament Fabrication Additive Manufacturing Technology Using Bronze (opens in a new tab)

  3. Binder Jetting and Heat Treatment of Ferrous Alloys

    … tailor the parameters and then to optimize for green density were conducted. The effect of powder morphology was discussed. Statistical significance of parameters and their interactions was noted. Regression analysis formed the basis of the optimization. Expressions for green density and powder …

    waterloo Repository record for Binder Jetting and Heat Treatment of Ferrous Alloys (opens in a new tab)

  4. Mechanical and Structural Properties of Microwave Sintered Tin-Copper-Antimony Alloys

    … alloys were examined to determine the effect of green density, sintering time, and sintering temperature on the mechanical and structural properties of the sintered compacts. Samples were prepared by hydraulic pressing of a well mixed and blended tin alloy powder with three different …

    waikato-masters Repository record for Mechanical and Structural Properties of Microwave Sintered Tin-Copper-Antimony Alloys (opens in a new tab) Download file for Mechanical and Structural Properties of Microwave Sintered Tin-Copper-Antimony Alloys (opens in a new tab)

  5. Effects of powder conditioning on the quality, microstructure and mechanical properties of sintered titanium alloys

    … purpose of improving the compressibility and the green density homogeneity. Lubrication improved the compressibility of Ti powder compacts, especially in the low pressure region (<400MPa), yet at higher pressures, lubricants hindered further improvement. An addition of up to 0.3wt.% SA improved …

    waikato-masters Repository record for Effects of powder conditioning on the quality, microstructure and mechanical properties of sintered titanium alloys (opens in a new tab) Download file for Effects of powder conditioning on the quality, microstructure and mechanical properties of sintered titanium alloys (opens in a new tab)

  6. Mechanism of anisotropic shrinkage during sintering of metalli powders

    … for pure iron, corresponding to an equilibrium density of structural defects. It also varies during the isothermal holding time. This discrepancy is attributed to the defectiveness introduced by cold compaction, that increases diffusivity through the activation of dislocation pipe mechanism, …

    trento Repository record for Mechanism of anisotropic shrinkage during sintering of metalli powders (opens in a new tab)

  7. COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA

    … and slip casting. The compacts exhibited uniform green microstructure and a high green density of 64 % th, which is comparable to that of a dense, random compact of equal-sized spheres, over the range of suspension concentrations, compacting conditions, and initial particle sizes studied. In …

    nus Repository record for COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA (opens in a new tab) Download file for COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA (opens in a new tab)

  8. Development of new high performance Titanium alloys with Fe-addition for dental implants

    … low elastic modulus, high mechanical strength/ density and good biocompatibility). Ti β alloys based on the Ti-Mo alloy system shows unique properties to employ as biomaterials. Tiβ alloys have lower Young Modulus, shielding stress and lower bone reabsorption. This research aims to develop a new …

    upv Repository record for Development of new high performance Titanium alloys with Fe-addition for dental implants (opens in a new tab)

  9. Synthesis, Microstructure and Mechanical Properties of Titanium with Controlled Levels of Porosity

    … into a plaster mould to form compacts with a green density of 45%. Thermal debinding was carried out at 320°C with an argon flow for 2 hours, followed by vacuum sintering different samples at 1000°C and 1200°C for 0.5 hours, respectively. The porous sintered compacts had satisfactory tensile …

    waikato-masters Repository record for Synthesis, Microstructure and Mechanical Properties of Titanium with Controlled Levels of Porosity (opens in a new tab) Download file for Synthesis, Microstructure and Mechanical Properties of Titanium with Controlled Levels of Porosity (opens in a new tab)

  10. Development of a model of the anisotropic dimensional change on sintering

    … anisotropic dimensional changes. The effects of green density, geometry, and compaction parameters (compaction speed hold down force and hold down time) on the anisotropy of dimensional changes on sintering were investigated. Ring shaped parts made of eight different iron-based materials were …

    trento Repository record for Development of a model of the anisotropic dimensional change on sintering (opens in a new tab)

  11. Near-Net Shaping and Additive Manufacturing of Ultra-High Temperature Ceramics via Colloidal Processing

    … particle packing, and strength of a ceramic green body. For difficult-to-densify ceramics such as the UHTCs, which find their place in extreme environment applications, precise control of each step of the manufacturing process is key. In this work, a fundamental study on the interaction …

    vt Repository record for Near-Net Shaping and Additive Manufacturing of Ultra-High Temperature Ceramics via Colloidal Processing (opens in a new tab)

  12. Turf Quality of Creeping Bentgrass Using Foliar Fertilization Tank-Mixed with Sprayable Organic Amendments

    … N fertilizers to improve turfgrass quality. A greenhouse study was conducted in 2012 and 2013 to determine turf quality of three different N forms tank-mixed with three different organic amendments. Generally, urea treatments received the highest VQ among all N forms ranging from 1.6-3.5 higher …

    ndsu Repository record for Turf Quality of Creeping Bentgrass Using Foliar Fertilization Tank-Mixed with Sprayable Organic Amendments (opens in a new tab)

  13. Processability of Nickel-Boron Nanolayer Coated Boron Carbide

    … uniaxial die compaction by yielding much higher green density and green strength (73% vs. 53.8% green density for the Ni-B coated B4C). Among compacts obtained from the same technique, Ni-B coated B4C compact yielded the densest packing with crack-free compact surface and the highest strength, …

    vt Repository record for Processability of Nickel-Boron Nanolayer Coated Boron Carbide (opens in a new tab)

  14. Experimental Investigation and Modeling of Powder-bed Additive Manufacturing Processes

    … summary of the printing quality (e.g., density, shrinkage, and mechanical properties) collected from both academia and industry for the first time. Lastly, the formation of powder bed was discussed via investigations of (1) the difference between green density and powder bed density and …

    tamu Repository record for Experimental Investigation and Modeling of Powder-bed Additive Manufacturing Processes (opens in a new tab)

  15. Binder Jet Additive Manufacturing of Tungsten Carbide-Cobalt Tooling Material

    … underwent a curing step at 200°C to enhance green density, enabling part stability. Subsequently, debinding removed the binder to eliminate any residuals before densification techniques. BJAM densification techniques included sintering, hot isostatic pressing (HIP), and pack carburizing. The …

    unt Repository record for Binder Jet Additive Manufacturing of Tungsten Carbide-Cobalt Tooling Material (opens in a new tab)

  16. Study of the anisotropic sintering shrinkage of green iron and stainless steel

    … into rigid dies to obtain the so called green part that is subsequently sintered to promote the formation of metallic bonding between the powder particles. The differences in terms of geometrical and dimensional features between the green compact and the final part are related to the …

    trento Repository record for Study of the anisotropic sintering shrinkage of green iron and stainless steel (opens in a new tab)

  17. Production of ceramic nanoparticles through self-propagating high-temperature synthesis (SHS) and their introduction into a metallic matrix to form metal matrix composites (MMC)

    … by providing high heating rates, controlling the green density and adding diluents to the reaction such as Al, TiC, SiC or Al2O3. Cooling experiments were also investigated, but the cooling rate was found to have no effect on the particle size.

    colo-mines Repository record for Production of ceramic nanoparticles through self-propagating high-temperature synthesis (SHS) and their introduction into a metallic matrix to form metal matrix composites (MMC) (opens in a new tab)

  18. Green state joining of silicon carbide using polymer precursors

    <p>Green state joining of structural ceramics has shown its potential for forming large, complex components. In this work, methods of green state joining of silicon carbide using polymer precursors are explored. Pastes containing either polycarbosilane (PCS) or Allylhydridopolycarbosilane (AHPCS) …

    iastate Repository record for Green state joining of silicon carbide using polymer precursors (opens in a new tab)

  19. Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels

    … tests. In addition, the effect of compact density and microstructures of materials on the resistance to contact damage mechanisms was investigated. Density and microstructure were modified by varying green density, alloying elements, sintering temperature and time, and applying …

    trento Repository record for Theoretical analysis and experimental investigation of contact fatigue and surface damage in prealloyed and diffusion bonded sintered steels (opens in a new tab)

  20. Sintering and its enhancement in ferrous powder compacts

    … sintering parameters such as particle size, green density, time and temperature. Two sets of diagrams have been drawn to define the sintering kinetics, namely, the field map and the neck growth/shrinkage map. A new and simple method has been developed to construct the field maps, which define …

    ubc Repository record for Sintering and its enhancement in ferrous powder compacts (opens in a new tab) Download PDF for Sintering and its enhancement in ferrous powder compacts (opens in a new tab)

Page 1 of 2