Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Grooved Surface"”.
-
Evaporative cooling on a grooved surface
… the drops evaporate on contact with the heated surface. Since no water accumulates on the surface, the term "dry wall" is used to described the surface condition. If while operating in the drywall mode the surface temperature is lowered, there will be a transition to a point where water will …
-
Augmentation of Jet Impingement Heat Transfer on a Grooved Surface Under Wet and Dry Conditions
… cooling experiments were performed on flat and grooved surfaces with the surface at a constant temperature. For the flat surface, power and temperature measurements were performed to obtain convection coefficients under a wide range of operating conditions such as jet speed, orifice to surface …
-
Increasing the Heat Transfer on a Grooved Surface Under Dry and Wet Conditions by Using of Jet Impingement
… using air jets which impinge on a triangular grooved surface with dry grooves and grooves containing water. One major application is for condensers of thermoelectric power plants. The heat and mass transfer analogy were successfully used to evaluate the simultaneous heat and mass transfer. …
-
Interaction of the focused laser beam with the grooved surface of optical disk: Evanescent coupling and vector diffraction effects
… effects in the diffraction of focused beams by grooved, multilayer-coated disks. The reading process of optical disk systems significantly relies on the reaction of the incident focused beam to the disk structure, may it be the groove profile or coating materials. The resulting complex-amplitude …
-
Vaporization of thin liquid films
… Experimental runs were conducted on a mirrorlike surface utilizing distilled water and ethyl-alcohol; on a grooved surface with distilled water as the working fluid; and on a surface covered with 4 layers of Nickel 50 x 40 mesh with distilled water as the working fluid. Results show that liquid …
-
INFLUENCE OF TOPOGRAPHY OF ENDOVASCULAR STENT MATERIAL ON SMOOTH MUSCLE CELL RESPONSE
… cause of restenosis. A number of stent surface parameters, including topography, have been attributed to play an important role in stent performance. Although endothelial cell and thrombotic response to surface roughness have been well evaluated, the effect of topography of the outer …
-
The damping of surface water waves in containers with grooved surfaces
The damping, of surface waves on shallow water can be affected by the roughness of the container walls as well as by surfactant layers present on the air-water interface. The increase in the damping caused by a grooved wave tank base has been studied both theoretically and experimentally. In any …
-
Optimization of surface modifications to enhance Cryogenic Pool Boiling
… is essential. Enhancing nucleate boiling through surface modifications has emerged as a promising passive technique to improve heat flux. Building on prior work by Andrew et al., which demonstrated improved performance using axially grooved aluminum cylinders, this study investigates the effects …
-
Laser ablation of silicon surfaces : the effects of a low level background light
… has proven to be an effective three dimensional surface patterning technology. In this thesis, we present findings on the patterning of semiconductor surfaces using laser ablation in air as well as in solutions. In this thesis, we suggest that the depth of a pattern induced on silicon by firing a …
-
Using Anisotropic Micro-Scale Topography to Manipulate the Wettability of Aluminum and Reduce the Retention of Water
Water droplets placed on a micro-grooved aluminum surface using a micro-syringe exhibit significantly increased apparent contact angles, and for water condensed onto an inclined, micro-grooved surface, the droplet volume at incipient sliding is reduced by more than 50% compared to droplets on a …
-
An investigation into the effect of longitudinal micro-striations and their profiles, on the drag of flat plates
… of specific dimensions are machined onto the surface of a smooth plate, in a streamwise direction. The effect of these surface modifications on the drag force of a smooth plate is examined. The use of surface modifications as a means of reducing viscous drag on a body has potential aerodynamic …
-
Directed collisions between epithelial cells and fibroblasts in vitro on micromachined substrata
… on whether different implant materials or surface topographies alter cell interactions. In this study F and E cells were cultured separately or in combination on smooth or grooved titanium surfaces. Grooves 40 μm wide and 3 μm deep, separated by ridges 40 μm wide were placed in silicon by …
-
An Investigation of Dolphin-Groove Inspired Surface Patterning on Flow Control
… layer and compared to the smooth plate (non-grooved) wall cases. The grooved surfaces form embedded vortices within the sinusoidal cavities which can lead to a partial slip condition effect in the wall vicinity. DPIV results quantify momentum adjacent to the grooved surface and the …
-
Dynamic micro-3D-printed substrates for characterizing cellular responses to topography
… producing micrometer-scale depressions on the surfaces of photoresponsive protein hydrogels. The impact of various experimental parameters on topographical feature dimensions is characterized. Micro-3D imprinting is used to introduce dynamic topographical changes on a cell culture substrate, …
-
Faulting evidence of isostatic uplift in the Rincon Mountains metamorphic core complex: An image processing analysis
… Vaca fault, has a polished, planar, striated and grooved surface with slickenlines indicating pure normal dip-slip movement (N10°W, 83°SW; slickensides rake 85°SW). The Cabeza de Vaca fault is the eastern boundary of a 2 km-wide graben, with displacement as great as 400 meters. The N10-30°W faults …
-
An investigation of the machining performance and mechanisms with rake face textured cutting tools
A literature review about the surface texture fabrication technologies and the previous studies of using surface textured cutting tools to improve the cutting performance is reported. It is shown that cutting tool surface texture is a promising technology to reduce the friction at the tool-chip and …
-
Lattice Boltzmann Study of Near-Wall Multi-Phase and Multi-Component Flows
… moving in a channel made of one smooth and one grooved wallwas studied. It was found that the wettability and the topography of the grooveaffected the flow much more under small scales than under macroscopic scales. Withthe grooved surface being sufficiently hydrophobic, the droplet was lifted …
-
Characterization of galvanized/galvannealed sheet steel defects towards enabling defect free zinc coatings
… to defect formation, the Zn pot sink roll micro-grooved surface and Mn rich oxides were shown to affect coating thickness. Material B was received as having acne type defects in a GI coating. Scanning electron microscopy (SEM) showed a uniform coating, and the steel-coating interface was planar. …
-
Effects of surface topography on organization of cells and extracellular matrix
… an implant is governed to a large extent by its surface properties that will influence cell behaviour reflected in their migration, attachment, morphology, and proliferation. Also, the integration of the surrounding tissue around the implant is dependent on the reorganization of the surrounding E …
-
A numerical and theoretical study of drag reduction using superhydrophobic surfaces
… drag reduction benefits of superhydrophobic surfaces (SHS), direct numerical simulation (DNS) and theoretical analyses are used to explore the interaction between SHS and turbulent channel flow. First, DNS is used to study the drag reduction by SHS in laminar channel flow. Resolved …