Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 103 for “"Group contribution"”.
-
Group contribution modeling of physical properties during urethane reaction
… single materials and binary system mixtures, a group contribution method was introduced to estimate viscosities of a range of polyol oligomers and urethane polymers at temperatures from 25 to 150�C. Use of mixture rules then extends the estimation method to multi-component reacting systems. …
-
Prediction of heats of mixing by group contribution methods
<p>Three group contribution methods used to predict heats of mixing were tested: AGSM, UNIFAC with temperature dependent parameters and the modified UNIFAC of Skjold-Jor-gensen et al. The modified UNIFAC provided the best results and was adopted in this study. Primary parameters were obtained for …
-
Group contribution study for synthetic fuel constituents - naphthenes, A
Includes bibliographical references.
-
Modeling Asphaltene Precipitation and Implementation of Group Contribution Equation of State Into Utcomp
… recovery, and the second part is to implement group contribution equation-of-state for the phase equilibrium calculations in reservoir simulations. Asphaltene precipitation is a serious problem in oil recovery, and it may damage the oil production. Many models have been developed to predict the …
-
Evaluation of Knox group contribution parameters using quantum based molecular and group properties
Thermodynamic property prediction through the group contribution methods has been improving. However, the approaches considered in the past present not only limitations on the physical basis but often have restrictions as to certain substances, such as isomers. A new group contribution method is …
-
Minimum Ignition Energy Prediction for Organic Gases and Liquids using Group Contribution Method
Group contribution (GC) models are developed using ordinary least square (OLS) regression, Huber ridge regression (HRR) and kernel ridge regression (KRR) for minimum ignition energy (MIE) prediction of 55 flammable organic gases and liquids. Marrero/Gani (MG) GC method was used to determine …
-
Development of a group - contribution equation of state for the thermodynamic modelling of associating mixtures
… of the present thesis is the development of a group – contribution model able to accurately describe the phase equilibria of mixtures comprising of associating compounds. Modelling of phase equilibrium in mixtures involving hydrocarbons, such as those comprising natural gas, water and alcohols …
-
Prediction of the Phase Behavior and Properties of Hydrocarbons with a One-Parameter PC-SAFT Approach Assisted by a Group Contribution Method
… identification is limited. Fully-predictive group contribution (GC) methods have been developed as an alternative to overcome data scarcity. Although providing a higher degree of accuracy, most recent GC approaches require detailed information of the molecular structure, which is not …
-
Measurements and modeling of physical properties for oil and biomaterial refining
… parameters and for validation of predictive group contribution model UNIFAC(Dortmund) and predictive COSMO-RS model. A method for improving group contribution methods is suggested. The distance weighting technique takes into account similarity of the compounds for optimization of the group …
-
Design and evaluation of heat transfer fluids for direct immersion cooling of electronic systems
… phase change cooling of electronic systems. Four group contribution methods for thermophysical properties relevant to heat transfer were critically evaluated and new group contributions were regressed for organosilicon compounds. 52 new heat transfer fluids were identified via computer-aided …
-
Thermodynamic and leaching studies of various systems
<p>The group contribution approach is a reliable and fast method for the prediction of liquid phase activity coefficients in none lectrolyte, nonpolymeric mixtures at low to moderate pressures and temperatures between 300 and 425 K. It has become widely used in practical chemical engineering …
-
Allocating effort within a social dilemma: The effects of goal-setting, ability differences, and reward risks on contributions to the group.
… the effects of two conflicting goals (e.g. a group and an individual goal) and two types of rewards (e.g. an incremental and a target reward) on group contribution when group members vary in their ability to accomplish the group task. The experimental task was set up as a social dilemma in …
-
A modified UNIFAC model for the prediction of Henry's constants
<p>A group-contribution model for the correlation and prediction of Henry's constants in single solvents is presented. The mode: involves a one-parameter per gas/ solvent group pair UNIFAC expression extended to incorcorate free volume effects. The model is applied to three gases, CH<sub>4</sub>, …
-
Aqueous Henry's Law Constants, Infinite Dilution Activity Coefficients, and Water Solubility: Critically Evaluated Database, Experimental Analysis, and Prediction Methods
… literature. A first-order temperature-dependent group contribution method was developed to predict Henry's law constants of hydrocarbons, alcohols, ketones, and formats where none of the functional groups are attached directly to a benzene ring. Efforts to expand this method to include ester and …
-
Measurements of the Molar Heat Capacity and the Molar Excess Enthalpy for Various Alkanolamines in Aqueous Solutions
… the Redlich-Kister Equation. Solution theory and group contribution modelslike NRTL (Non-random Two-liquid), UNIQUAC (Universal-Quasi chemical), and UNIFAC (Universal Functional activity coefficient) were used to model the experimental values of the molar excess enthalpies. Among the three …
-
Temperature dependency of the group interaction parameters in the AGSM and UNIFAC models for the prediction of heats of mixing
<p>A four-parameter group-contribution model (UNIFAC) has been developed for the prediction of heats of mixing of non-electrolyte mixtures. Both the UNIFAC and AGSM models are evaluated over a wide range of temperature dependencies of the group interaction parameters. The UNIFAC model has been …
-
Estimation of Melting Points of Organic Compounds
… enthalpy of melting is calculated by additive group contributions.Melting points are estimated from the ratio of the enthalpy of melting and the entropy of melting. All of the methods and group contributions developed in this study are compatible with the UPPER (Unified Physical Property …
-
Evaluation of UNIFAC group interaction parameters usijng properties based on quantum mechanical calculations
Current group-contribution methods such as ASOG and UNIFAC are widely used for approximate estimation of mixture behavior but unable to distinguish between isomers. Atoms in Molecules (AIM) theory can solve these problems by using quantum mechanics and computational chemistry to compute atomic …
Page 1 of 6