Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Group contribution method"”.
-
Minimum Ignition Energy Prediction for Organic Gases and Liquids using Group Contribution Method
Group contribution (GC) models are developed using ordinary least square (OLS) regression, Huber ridge regression (HRR) and kernel ridge regression (KRR) for minimum ignition energy (MIE) prediction of 55 flammable organic gases and liquids. Marrero/Gani (MG) GC method was used to determine …
-
Prediction of the Phase Behavior and Properties of Hydrocarbons with a One-Parameter PC-SAFT Approach Assisted by a Group Contribution Method
… identification is limited. Fully-predictive group contribution (GC) methods have been developed as an alternative to overcome data scarcity. Although providing a higher degree of accuracy, most recent GC approaches require detailed information of the molecular structure, which is not …
-
Group contribution modeling of physical properties during urethane reaction
… single materials and binary system mixtures, a group contribution method was introduced to estimate viscosities of a range of polyol oligomers and urethane polymers at temperatures from 25 to 150�C. Use of mixture rules then extends the estimation method to multi-component reacting systems. …
-
Aqueous Henry's Law Constants, Infinite Dilution Activity Coefficients, and Water Solubility: Critically Evaluated Database, Experimental Analysis, and Prediction Methods
… in water using the inert gas stripping method at ambient pressure (approximately 12.5 psia) and at temperatures between 8°C and 50°C. Fugacity ratios, required to determine infinite dilution activity coefficients for the solid solutes, were calculated from literature values for the heat …
-
Evaluation of Knox group contribution parameters using quantum based molecular and group properties
Thermodynamic property prediction through the group contribution methods has been improving. However, the approaches considered in the past present not only limitations on the physical basis but often have restrictions as to certain substances, such as isomers. A new group contribution method is …
-
New methods for activity coefficients correlations based on an improved prediction of pair distribution functions in mixtures
Two new methods are examined for computing liquid phase activity coefficients at low pressures. The first is the Modified Regular Solution Theory (MRST), the second is a new group contribution method. These two methods are based entirely on the mean density approximation (MDA) to evaluate pair …
-
Θερμοδυναμική μελέτη μιγμάτων πολυμερών σε ευρεία περιοχή θερμοκρασιών και πιέσεων
… that is based in the quartz crystal microbalance method was developed for the measurement of sorption data. The experimental study was focused on three areas, sorption of blowing agents in polymers, sorption of mixtures of gases in semicrystalline polymers and sorption of gases in copolymers. …
-
Core-Shell drug delivery system for albendazole to treat Ovarian Cancer: From RAFT polymer synthesis to Cellular Uptake
… hydrophilic block. Based on predictions using group contribution method calculations and experimental results, methyl methacrylate was chosen to build the hydrophobic block as it demonstrated to achieve the highest compatibility with ABZ. To stabilize the structure of micelles, different …
-
Design and evaluation of heat transfer fluids for direct immersion cooling of electronic systems
… phase change cooling of electronic systems. Four group contribution methods for thermophysical properties relevant to heat transfer were critically evaluated and new group contributions were regressed for organosilicon compounds. 52 new heat transfer fluids were identified via computer-aided …
-
Carboxylic acid and formaldehyde separation from aqueous solutions using ionic liquids
… selectivity. <br/>The UNIQUAC method was employed to correlate the LLE data for pure IL systems. Some physical property data, such as density and viscosity, of ILs were correlated. The Joback group contribution method was used to predict the heat capacities of some ILs in this …
-
Evaluation of physical properties of ionic liquids
… of ionic liquids were evaluated by using a group contribution method. The volumetric parameters of 55 ions were calculated by correlating 5,399 training data points using the Tait-type equations. 2,522 test datapoints were used to validate the accuracy of this method. This method also allows …
-
TREATING CONTAMINATED WATER: PREDICTING REACTIVITIES OF AQUEOUS ORGANIC CONTAMINANTS WITH HYDRATED ELECTRONS, AND DEVELOPMENT OF A BIOGARDEN TO MANAGE GREYWATER DISCHARGE IN MONTEVERDE, COSTA RICA
… solvated electrons (e-aq) are a promising method for the destruction of conventional and emerging aqueous organic contaminants. While there is a large database of contaminant reactivity with e-aq in the literature, there is little information on the detailed elementary mechanisms for …
-
Polyurethane rigid foams modeling project
… foams for commercial processes. In Chapter 3, a group contribution method for the estimation of heat capacities of polyols, isocyanate and DEG/TEG was supplemented to increase accuracy for use with reactants, intermediates, and products during urethane polymerization. Differential Scanning …
-
Artificial intelligence and chemical kinetics enabled property-oriented fuel design for internal combustion engine
… (AI) technologies, gas-phase chemical kinetics. Group contribution method (GCM) is utilized to establish the GCM-UOB (University of Birmingham) 1.0 system with 22 molecular descriptors and the surrogate formulation is to minimize the difference of functional group fragments between target fuel …
-
The separation of hydrogen and carbon monoxide using polymer membranes
… of acetic acid by reaction with methanol. A method of economic evaluation has been developed for the process as a whole and a comparison is made between separation of the H2/CO mixture by a membrane system and the conventional method of cryogenic distillation. Costs are based on bids obtained …
-
Development and application of numerical models for simulating bio-oil gasification
… consisting of ten major components. The Joback method, a group contribution method, was used to calculate the bio-oil thermophysical properties, including enthalpy, latent heat, and vapor pressure. With the bio-oil thermophysical properties, vaporization of single bio-oil drop was simulated, and …
-
The molecular design of a new solvent for the absorption of carbon dioxide
… structure by applying recently published methods of predicting gas solubility from the molecular groups which make up the solvent molecule. The removal of the acid gases of carbon dioxide and hydrogen sulfide from methane or hydrogen was used as a commercially important example. After a …
-
Computational and experimental study on structure-photoactivity relationships of formate esters and perfluorinated anhydrides
… anhydrides. The Restricted Hartree Fork (RHF) method was used for tert -butyl formate ground states at 3-21G, 6-31G and 6-31G* levels, and the Unrestricted Hartree Fork (UBF) method was performed for the first triplet excited state, and the triplet 1,4-diradicals of tertbutyl formate at 3-21G* …
-
Computational and experimental study on structure-photoactivity relationships of formate esters and perfluorinated anhydrides
… anhydrides. The Restricted Hartree Fork (RHF) method was used for tert -butyl formate ground states at 3-21G, 6-31G and 6-31G* levels, and the Unrestricted Hartree Fork (UBF) method was performed for the first triplet excited state, and the triplet 1,4-diradicals of tertbutyl formate at 3-21G* …
-
Study of the miscibility, crystallization and morphology in poly(propylene) based blends and copolymers
… behavior is consistent with predictions by the group contribution method. Miscibility behavior of high molecular weight isotactic poly(propylene) (it-PP) and isotactic poly(1-butene) (it-P1B) blend is investigated by a combination of optical microscopy and scanning electron microscopy, …
Page 1 of 2