Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 385 for “"Grout"”.

  1. Structural Lightweight Grout Mixture Design

    This research focused on designing a grout mixture using lightweight aggregate that achieves the minimum 28-day compressive strength required for normal-weight grout, 2000 psi. This research specifically studied the effects of aggregate proportion, slump, and aggregate soaking on the compressive …

    byu Repository record for Structural Lightweight Grout Mixture Design (opens in a new tab) Download PDF for Structural Lightweight Grout Mixture Design (opens in a new tab)

  2. GROUT DESIGN FOR PARTIALLY GROUTED RIPRAP

    … In addition to basic, loose riprap, partially grouted riprap (PGR) is also an option when selecting a countermeasure. PGR is relatively new in the United States, but has been used widely in Europe to prevent scour or erosion of the bed, banks, shoreline, and at piers and abutments. PGR …

    temple Repository record for GROUT DESIGN FOR PARTIALLY GROUTED RIPRAP (opens in a new tab)

  3. The Influence of Corrosion Mitigating Fluids on Post Tensioned Tendon Grout Properties and Steel to Grout Bond Strength

    … on reinforcing bars, which had minimal impact on grout properties. Ongoing research will determine whether it effectively mitigates corrosion.

    usf Repository record for The Influence of Corrosion Mitigating Fluids on Post Tensioned Tendon Grout Properties and Steel to Grout Bond Strength (opens in a new tab)

  4. The two-component grout in the tunnelling applications

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for The two-component grout in the tunnelling applications (opens in a new tab)

  5. Evaluation of epoxy grout for roller path repairing

    … physical properties of high strength proprietary grouts to determine their adequacy for use beneath new roller paths of water control gates which have unusual spacial constraints. Two full size mockups of a portion of an existing guide, with a steel overlay, were utilized in the experimental …

    manitoba Repository record for Evaluation of epoxy grout for roller path repairing (opens in a new tab)

  6. Strength of Masonry Grout Made with Expanded Shale

    … Limited research has been done on light-weight grout though and there are no standards in place. The research performed in this study is intended to increase the knowledge of light-weight grout specifically made with expanded shale aggregate. The research presented herein is a pilot study and …

    byu Repository record for Strength of Masonry Grout Made with Expanded Shale (opens in a new tab) Download PDF for Strength of Masonry Grout Made with Expanded Shale (opens in a new tab)

  7. Estimation of Grout Absorption in Fractured Rock Foundations

    Made available in DSpace on 2014-12-11T18:09:58Z (GMT). No. of bitstreams: 1 7219931.pdf: 11127585 bytes, checksum: 570be27e2db9047c6396382199ed8e4b (MD5) Previous issue date: 1972

    uiuc Repository record for Estimation of Grout Absorption in Fractured Rock Foundations (opens in a new tab)

  8. Behaviour Of Grout Infilled Steel Tubular Members And Joints

    … ¿ Sectional capacity enhancement for partially grout infilled member; and ¿ Fatigue assessment of tubular joint with fully grout infilled chord Both experimental and numerical investigations were conducted. The finite element (FE) results are found to be in good agreement with the experimental …

    nus Repository record for Behaviour Of Grout Infilled Steel Tubular Members And Joints (opens in a new tab) Download file for Behaviour Of Grout Infilled Steel Tubular Members And Joints (opens in a new tab)

  9. Novel methods for monitoring grout penetration in hard rock

    Grouting has been used in ground engineering since the early 19th century. Grouts are injected into the ground both for the creation of hydraulic barriers and for ensuring ground stability. Example applications are dam sealing, underground isolation of waste disposal sites, stabilisation of mine …

    strathclyde Repository record for Novel methods for monitoring grout penetration in hard rock (opens in a new tab)

  10. Repair of earth constructions by means of grout injection

    … With this respect, the injection of mud grouts is being put forward in the recent years and has been showing good results in the few reported cases. This thesis aims at contributing to the development of the limited knowledge on the injection technique applied to earth constructions. The …

    minho-thes Repository record for Repair of earth constructions by means of grout injection (opens in a new tab)

  11. Flexural Bond Strength of Masonry Assemblies with Lightweight Grout

    Lightweight grout has many potential benefits in masonry construction, including minimizing mass, improving thermal performance, and potentially reducing shrinkage cracking via internal curing. However, insufficient testing of masonry assemblies with lightweight grout has been conducted to suggest …

    clemson Repository record for Flexural Bond Strength of Masonry Assemblies with Lightweight Grout (opens in a new tab)

  12. Corrosion of Post-Tensioned Tendons Repaired with Dissimilar Grout

    … years after construction. Large voids in the grout and pockets of non-homogeneous material were identified. The non-homogeneous grout was characterized by high moisture content, and in most cases, the chloride content was lower than conservative threshold values. The non-homogeneous grout also …

    unf Repository record for Corrosion of Post-Tensioned Tendons Repaired with Dissimilar Grout (opens in a new tab) Download PDF for Corrosion of Post-Tensioned Tendons Repaired with Dissimilar Grout (opens in a new tab)

  13. The Impact of Grout Specimen Geometry on Compressive Strength Results

    Some project standards specify that grout be tested in accordance with ASTM C1019 “Standard Test Method for Sampling and Testing Grout for Masonry”. This is true even when the grout is not being used for the purpose of masonry construction, such as bridge riser bearing plates and anchoring …

    uno Repository record for The Impact of Grout Specimen Geometry on Compressive Strength Results (opens in a new tab)

  14. Estimating the As-Placed Grout Volume of Auger Cast Piles

    … designed pile with a continuous flight auger. Grout (cement, sand, and water mixture) is then pumped through the hollow auger stem to begin grouting the excavation. After establishing an initial head pressure, the auger is slowly extracted while the remainder of the pile is grouted. Once the …

    usf Repository record for Estimating the As-Placed Grout Volume of Auger Cast Piles (opens in a new tab)

  15. Durability of post-tensioning grout systems with mixed-In chlorides

    … of the most important properties of concrete and grout is its ability to protect the structural steel that is essential to post-tensioned concrete. The purpose of this report is to determine the effect of various concentrations of chloride ions on the long term durability of pre-stressing strands …

    umn Repository record for Durability of post-tensioning grout systems with mixed-In chlorides (opens in a new tab)

  16. Development of Lambda Factors for Masonry Design with Lightweight Grout

    … and pavements for decades. However, lightweight grout is still not permitted for use in reinforced masonry construction by the TMS 402/602-16 code. In order to realize the benefits of lightweight grout in U.S. reinforced masonry construction, a codified procedure for its use is required which …

    clemson Repository record for Development of Lambda Factors for Masonry Design with Lightweight Grout (opens in a new tab)

  17. Reinforcing Bar Splice Performance in Masonry with Self-Consolidating Grout

    The use of self-consolidating grout in reinforced masonry construction provides various advantages such as reduced labor, faster construction, decreased noise pollution and better structural response. This is a relatively new building material however, and little research on self-consolidating …

    byu Repository record for Reinforcing Bar Splice Performance in Masonry with Self-Consolidating Grout (opens in a new tab) Download PDF for Reinforcing Bar Splice Performance in Masonry with Self-Consolidating Grout (opens in a new tab)

  18. 3D printing of polyblend calcium carbonate (grout) using binder jetting technology

    … of the concept that polyblend calcium carbonate (grout) can be used as a material on a binder jetting 3D printer. In achieving the project objective tile specimens were constructed. This research investigated the effect of using different layer thickness, binder saturation levels, curing solutions …

    wichita-thes Repository record for 3D printing of polyblend calcium carbonate (grout) using binder jetting technology (opens in a new tab)

  19. Estimation of grout distribution in a fractured rock by numerical modeling

    Grouting has been used over the past two centuries to increase the strength, decrease the deformation and reduce the permeability of soils or fractured rocks. Due to its significance in engineering and science predicting grout effectiveness in fractured rocks is of interest. There are different …

    ubc Repository record for Estimation of grout distribution in a fractured rock by numerical modeling (opens in a new tab) Download PDF for Estimation of grout distribution in a fractured rock by numerical modeling (opens in a new tab)

Page 1 of 20