Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Guard - bands"”.
-
SPECTRAL SHAPING AND SYMBOL ERROR MITIGATION TECHNIQUES TO INJECT OFDM SUBCARRIERS INTO NAVIGATIONAL RADAR GUARD BANDS AND MAINLOBE FOR SPECTRUM SHARING
… spectrum, fill the spectral tails (i.e., guard bands), and even inject subcarriers into the radar bandwidth. Unsurprisingly, the high-powered radar interferes with the communications signal such that the symbol error ratio (SER) is drastically degraded. In addition to the spectral shaping …
-
Self-adjusting pipeline designs and tuning methods for timing variation tolerance in multi-processor systems
… margins in the form of one time worst-case guard-bands are incorporated into the design. Microprocessor pipelines are margined by operating the design at a higher voltage or lower frequency than what the design can support. Incorporating safety margins is a temporary hack to an increasing …
-
Enhancing microprocessor power efficiency through clock-data compensation
… voltage noise. The large voltage and frequency guard-bands present in current microprocessor designs to combat voltage noise both degrade the performance and erode the energy efficiency of the design. In an effort to reduce guard-bands, adaptive clocking based systems combat the problem of …
-
Multi-Channel Nonlinear Frequency Division Multiplexed Optical Transmission Systems
… the individual channels. To avoid this effect, guard bands are usually inserted between channels which reduces the spectral efficiency, since these spectral regions cannot be used for data transmission. This work presents a novel concept for implementing WDM transmission systems based on the NFT …
-
Monolithically integrated coherent comb de-multiplexer using facetless semiconductor ring lasers
… long-haul optical transmission links employ guard bands between channels to avoid interference. This leads to inefficient use of the system bandwidth, which is limited by the erbium doped fibre amplifier (EDFA). A solution to this problem is to use coherent WDM (Co-WDM), or called optical …
-
Design methodologies, frameworks and implementations on reconfigurable devices for timing and energy optimizations
… the chip vendors impose global and conservative guard-bands in the operation of their manufactured chips. Such pessimistic strategy, however, does not utilize the actual performance capabilities of the individual chips and does not adapt to those operating conditions (e.g., IR-drop) that strongly …
-
Creating subchannels to improve throughput in wireless communication
… of traffic patterns. The effect of different guard bands was studied using the USRP and GNU Radio. Two daughterboards were used for each USRP so that two channels were used for transmission. The two transmissions had the same throughput whether the channels were placed very far aparta or …
-
Data Chunking in Quasi-synchronous DS-CDMA
… errors between users. Implementation of guard bands is explored to further reduce errors due to imperfect synchronization between users.
-
IC design for reliability
… of devices, traditional design methods add guard-bands to ensure that the circuit will function properly during its lifetime. However, the worst-case based guard-bands lead to significant penalty in performance. In this dissertation, we propose an effective macromodel-based reliability …
-
Integrated distribution of wireless and wired services using a passive optical fibre network
… networks without the employment of spectral guard bands that is commonly used for the reduction of Multiple Access Interference (MAI).
-
Optical multicarrier sources for spectrally efficient optical networks
… was enabled. In such systems the spectral guard bands between neighbouring channels are minimised, at the expense of stricter requirements on the performance of optical sources, especially the frequency (or wavelength) stability. Attractive solutions to address the frequency stability …
-
Monolithically integrated, high coherence frequency comb generation through on-chip gain switching
… reduce or eliminate the spectrally inefficient guard bands that are currently used to prevent cross-talk between adjacent channels. With their common laser source and fixed phase relation, frequency combs can offer to not only to replace the hundreds of lasers being used to generate hundreds of …
-
On-die adaptive power regulation and distribution for digital loads
… to provide a power architecture solution where guardband reduction and consistent performance are the key goals for power delivery networks in multicore SoCs. The necessity for maximizing energy efficiency without compromising performance has led to the implementation of fine-grain Dynamic …
-
Robust Cognitive Algorithms For Fast-Varying Spectrum-Agile Wireless Networks
… of many licensed channels in the VHF and UHF bands, a new paradigm for spectrum sharing has emerged in the past decade. In this paradigm, wireless devices (a.k.a. secondary users) are allowed to operate opportunistically in certain licensed bands without interfering with the licensed users …
-
Reconfigurable multi-carrier transmitters and their application in next generation optical networks
… more efficiently, by reducing the size of the guard bands and allowing closer optical carrier spacing, thereby increasing the overall spectral efficiency. However, such a scheme imposes stringent transmitter requirements such as frequency stability, which would not be met with the incumbent …
-
Subcarrier Multiplexing Based Transponder Design
… detection is numerically verified. However, guard bands and QPSK used in both transponders result in low spectral density, and conventional DD decoding degrades receiver sensitivity by 7 dB. To overcome these problems, a 209-Gb/s coherent transponder utilizing DD two amplitude/eight-phase …
-
Low-linewidth optical comb sources based on gain-switched lasers
… Each wavelength carrier must be separated by a guard band to reduce interference between channels. By moving to a coherent set of carriers, these guard bands can be reclaimed as usable bandwidth. Optical superchannels, which consist of several sub-carriers, can be used to increase the …
-
Protection and Restoration Schemes in Elastic Optical Networks
… into a MC reduces the requirement for guard-bands between channels. This provides an opportunity to treat multiple channels as a single entity in routing algorithms, spectrum assignment, and survivability schemes. The literature review conducted in this thesis found that the research in …
-
Designing orthogonal chirp division multiplexing waveforms for next generation wireless communications
… Second, there is no way of digitally introducing guard bands in OCDM without altering hardware sampling rates. Third, OCDM has a very high peak-to-average power ratio (PAPR). Solutions were subsequently proposed for each of the identified issues. To control the signal bandwidth, a low complexity …
-
FuzzPower: Leveraging the Power of Fuzzing to Uncover the Extremes of Processor Power
… forces designers to employ unnecessarily large guard bands, leaving performance on the table and systems vulnerable to power viruses. These limitations create a critical gap in pre-silicon power validation, especially for complex designs. This paper introduces an open-source, fast, and scalable …
Page 1 of 2