Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"H-Tree"”.

  1. Optical clock signal distribution and packaging optimization

    … optical paths were realized using an optical H-tree structure having 48 optical fanouts. This device could be increased to 64 without introducing any additional complications. A 1-to-48 fanout H-tree structure using Ultradel 9000D series polyimide was fabricated. The propagation loss and …

    texas Repository record for Optical clock signal distribution and packaging optimization (opens in a new tab) Restricted access

  2. Clock distribution network techniques

    … are then presented, including the popular H tree, grid and serpentine structures. Finally, commonly used techniques for improving clock skew, jitter and power are discussed and conclusions are offered.

    uiuc Repository record for Clock distribution network techniques (opens in a new tab)

  3. Characterization of integrated optical waveguide devices

    … were designed, modeled and measured. A 16-node H-tree waveguide was used to deliver light into photodetectors and characterized. Photodetectors at each end node of the H-tree were measured using near-field scanning microscopy. The 0.5 micrometer wide photodetector demonstrated up to 80% absorption …

    colostate Repository record for Characterization of integrated optical waveguide devices (opens in a new tab)

  4. Board-level optical interconnections with substrate mode holograms.

    … on each processor board with an H-tree distribution scheme. The performance of the proposed optical clock distribution system is evaluated. An experimental system is demonstrated with a 622 MHz clock signal distributed with 36 ps of timing jitter and less than 10 ps of clock skew. …

    arizona-thes Repository record for Board-level optical interconnections with substrate mode holograms. (opens in a new tab)

  5. Optimum partitioning of globally asynchronous locally synchronous processor arrays

    … in the clock networks because they need less H-tree levels. However, this implies a large number of sub-blocks, which increases the asynchronous power overhead. The thesis considers a 16 x 16 array of identical processors to evaluate GALS tradeoffs with different partitioning scenarios. Three …

    concordia Download PDF for Optimum partitioning of globally asynchronous locally synchronous processor arrays (opens in a new tab)

  6. Multi-layer silicon photonic devices for on-chip optical interconnects

    … for light coupling between layers, 2) 1-to-32 H-tree optical distribution, which has excess loss of 2.2 dB, output uniformity of 0.72 dB and 3 dB bandwidth of 880 GHz, 3) waveguide crossing utilizing index-engineered MMI coupler, which has crossing loss of 0.019 dB, cross talk lower than -40 dB …

    texas Repository record for Multi-layer silicon photonic devices for on-chip optical interconnects (opens in a new tab)

  7. Techniques for clock skew reduction over intra-die process, voltage, and temperature variations

    … clock signal, even in properly balanced clock tree networks. Hence, active clock deskewing becomes necessary to tune out unwanted clock skew after chip fabrication. This dissertation proposes a post-silicon autonomous deskewing system using tunable buffers to dynamically reduce clock skew. The …

    ubc Repository record for Techniques for clock skew reduction over intra-die process, voltage, and temperature variations (opens in a new tab) Download PDF for Techniques for clock skew reduction over intra-die process, voltage, and temperature variations (opens in a new tab)

  8. Case Studies on Clock Gating and Local Routign for VLSI Clock Mesh

    … can be broadly categorized into 'balanced tree' and 'fixed mesh' methods. The skew and delay using the balanced tree method is higher compared to the fixed mesh method. Although fixed mesh inherently uses more wire length, the redundancy created by loops in a mesh structure reduces …

    tamu Repository record for Case Studies on Clock Gating and Local Routign for VLSI Clock Mesh (opens in a new tab)

  9. Efficient Design and Clocking for a Network-on-Chip

    … to synthesize a low jitter, low power buffered H-tree for clock distribution. In the second part of this dissertation, we use these efficient clock distribution schemes to present a novel fast NoC design that relies on source synchronous data transfer over a ring. In our source-synchronous design, …

    tamu Repository record for Efficient Design and Clocking for a Network-on-Chip (opens in a new tab)

  10. Programmable and Scalable Bit-Sliced VLSI Architecture for Decision Tree Based Machine Learning Edge Inference

    … Our research focuses on employing decision trees (DTs) as an intelligent filtering mechanism on the edge. Preliminary comparisons across four datasets revealed DTs are significantly more efficient than multilayer perceptrons (MLP), saving 97-98\% in area and power, leading to the selection …

    usf Repository record for Programmable and Scalable Bit-Sliced VLSI Architecture for Decision Tree Based Machine Learning Edge Inference (opens in a new tab)

  11. 2.5D Chiplet Architecture for Embedded Processing of High Velocity Streaming Data

    … to external DDR memory. Furthermore, a new clock tree distribution network, and a wide bandwidth DRAM physical interface have been designed to address the data flow requirements within and across chiplets. At the algorithm and representation levels, the Online Change Point Detection (CPD) …

    jhu Repository record for 2.5D Chiplet Architecture for Embedded Processing of High Velocity Streaming Data (opens in a new tab)