Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"HARPSS"”.
-
Polymer-Based Wafer-Level Packaging of Micromachined HARPSS Devices
… Ratio Polysilicon and Single Crystal Silicon (HARPSS) technology. The packaging technique is based on thermal decomposition of a sacrificial polymer through a polymer overcoat followed by metal coating to create resizable MEMS packages. The sacrificial polymer is created on top of the active …
-
Advanced HARPSS Processes for High Q and High Frequency Inertial Sensors
… thesis is to introduce several advances into the HARPSS fabrication platform to improve the performance metrics of such resonant MEMS devices and enable new functionalities. Many resonators including bulk acoustic wave (BAW) gyroscopes require ultra-high quality factor (Q) in the order of 1M to …
-
The experimental study of electrical breakdown in vacuum encapsulated MEMS devices with deep submicron capacitive electrode gaps
… square and disk resonators fabricated using the HARPSS process. The characterization work involves measurement of breakdown voltage as a function of gap size and vacuum pressure.
-
Wafer-level encapsulated high-performance mems tunable passives and bandpass filters
… polysilicon and single crystal silicon (HARPSS) fabrication technique to obtain a larger capacitance density at the expense of a higher conductive loss. Using this process, a 15 pF two-port tunable capacitor is fabricated and tuned by 240% with the application of 3.5 V to the isolated …
-
Microscale hemispherical shell resonating gyroscopes
… poly- and single crystalline silicon (3D HARPSS) process is developed to fabricate free-standing, stem-supported hemispherical shell with self-aligned deep electrodes for driving, sensing and quadrature control of the gyroscope. This monolithic process consists of seven lithography steps …
-
Integrated three-axis accelerometers with nanometer scale capacitive gaps and signal conditioning interface IC
… are designed and fabricated using the HARPSS process, and interfaced with a switched-capacitor signal conditioning IC to characterize their performances. The measurement results showed the sensor can achieve operational bandwidth higher than 8.5 kHz, and noise levels of 221 μg/√Hz and …
-
High frequency capacitive single crystal silicon resonators and coupled resonator systems
… fabrication process referred to as HARPSS have been developed, characterized and optimized to overcome most of the challenges facing application of such devices as manufacturable electronic components. Several micromechanical structures for implementation of high performance …
-
High-frequency tri-axial resonant gyroscopes
… aspect ratio combined polysilicon and silicon (HARPSS) process is developed to resolve the Coriolis response that exists toward out-of-plane direction while drive-mode exists on in-plane, and tune individual frequencies with minimal interference to unintended modes. To conclude and overcome the …
-
High precision accelerometer contact microphones for detection of mechano-acoustic cardiopulmonary signals
… gap (270nm) electrodes implemented using HARPSS+ process, which is fabricated and characterized as a contact microphone. The sensor is designed using a cantilever topology, with a resonant frequency of 13.6kHz and sensitivity of 14.2fF/g. The fabricated sensor is interfaced with a …
-
Integrated inertial measurement units using silicon bulk-acoustic wave gyroscopes
… poly and single-crystal silicon (HARPSS) process flow was used to co-fabricate the devices that compose the system, enabling the implementation ultra-narrow capacitive gaps (< 300 nm) in thick device-layer substrates (40 um). The presented gyroscopes were implemented as …
-
Micromachined capacitive silicon bulk acoustic wave gyroscopes
… aspect ratio poly- and single crystal silicon (HARPSS) process was utilized to implement these devices in thick SOI substrates with very small capacitive gap sizes (~200 nm). The prototype devices show ultra-high quality factors (Q>200,000) and large bandwidth of 15-30Hz. In addition, the design …
-
Toward inertial-navigation-on-chip: The physics and performance scaling of multi degree-of-freedom resonant MEMS gyroscopes
… and single-crystal silicon RIE plus wet-etching (HARPSS+) process to enable, for the first time, electrostatic quadrature error cancellation in pitch and roll gyroscopes with both in-plane (IP) and out-of-plane (OOP) degree-of-freedom (DOF), which has been the bottleneck in multi-axis resonant …
-
Hermetically-Encapsulated Precision Accelerometer Contact Microphones for Wearable Medical Devices
… sensor, a dedicated fabrication process (i.e. HARPSS+) is used in which the transduction gap size of 250 nm is achieved by a thermally grown sacrificial oxide layer. The sensor is hermetically encapsulated into miniature dies of 2.8 mm x 2.8 mm size, at low vacuum levels (1 − 10 Torr), enabling …
-
Compensation and trimming for silicon micromechanical resonators and resonator arrays for timing and spectral processing
This dissertation reports very novel solutions for the trimming and compensation of various parameters of silicon micromechanical resonators and resonator-arrays. Post-fabrication trimming of resonance frequency to a target value is facilitated by diffusing in a deposited thin metal layer into a …
-
Interface circuits for readout and control of a micro-hemispherical resonating gyroscope
Gyroscopes are inertial sensors that measure the rate or angle of rotation. One of the most promising technologies for reaching a high-performance MEMS gyroscope has been development of the micro-hemispherical shell resonator. (μHSR) This thesis presents the electronic control and read-out …