Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"HEATS OF MIXING"”.
-
Liquid-Liquid Equilibrium Surfaces from Binary Heats of Mixing
Experimental heats of mixing were measured for four partially miscible binary systems at six to eight temperatures near their critical solution temperatures (CST) and for the binary pairs of six ternary liquid mixtures at four temperatures between 293.15 and 323.15 K using a Tronac isothermal flow …
-
Prediction of heats of mixing by group contribution methods
… group contribution methods used to predict heats of mixing were tested: AGSM, UNIFAC with temperature dependent parameters and the modified UNIFAC of Skjold-Jor-gensen et al. The modified UNIFAC provided the best results and was adopted in this study. Primary parameters were obtained for ten …
-
Calorimetric heats of mixing of some nonelectrolytic binary and ternary solutions
The heat of mixing of nonelectrolytic liquids is important in predicting the type of molecular interactions which exist in solutions of nonelectrolyted. The problem was to construct a calorimeter in which these heats of mixing could be measured accurately. Once constructed, the calorimeter was used …
-
Prediction of heats of mixing in hydrogen-bonded solutions using a UNIFAC model
<p>A model for the correlation and prediction of heats of mixing of hydrogen-bonded mixtures is presented. The model incorporates a UNIFAC term to describe the physical interactions and a chemical term to account for the hydrogen bonding contribution. The model is applied to binary and tertiary …
-
Application of the quasi-lattice theory to the heats of mixing of some alcohol-hydrocarbon systems
Values for the heats of mixing were obtained calorimetrically for the systems C2H5OH-C6H12, CH3OH-C6H6 and C2H5OH-C6H6 at 25° over the complete range of composition. Analytical equations which summarize these values are: Benzene (1) - Methanol (2) System ΔHxM = x1x2[628.4 + 365.7(x1-x2) + …
-
Temperature dependency of the group interaction parameters in the AGSM and UNIFAC models for the prediction of heats of mixing
… (UNIFAC) has been developed for the prediction of heats of mixing of non-electrolyte mixtures. Both the UNIFAC and AGSM models are evaluated over a wide range of temperature dependencies of the group interaction parameters. The UNIFAC model has been chosen over the AGSM model and an optimum …
-
Evaluation of Herington general integral test for vapor-liquid equilibrium data
<p>A new set of general integral tests for the thermodynamic consistency of isothermal and isobaric equilibrium data of binary systems was proposed by E.F.G. Herington.</p><p>The systems Benzene-Cyclohexane and Benzene-n-Propanol were examined using Herington integral test-. The data used included …
-
Molar Heat Capacities and Heats of Mixing of Aqueous Solutions of 2-(Propylamino)Ethanol, 2-(Butylamino)Ethanol, 1-(2Hydroxyethyl)Piperidine, BIS (2-Methoxyethyl)Amine and Other Alkanolamines of Importance to Carbon Dioxide Capture
This study is concerned with the determination of the molar heat capacity, Cp, and molar heat of mixing ,HE, of aqueous 2-(Propylamino)ethanol (PAE), 2-(Butylamino)ethanol (BAE), 1-(2-Hydroxyethyl)piperidine (HEP), and Bis(2-methoxyethyl)amine (BMOEA) solutions, as well as the Cp of …
-
Prediction of enthalpies of mixing with a generalized UNIFAC model
<p>The UNIFAC model of Skjold-Jorgensen et al (1980), which incorporates a general temperature dependence for the coordination number is used in the correlation and prediction of heats of mixing for binary liquid mixtures. Correlation and prediction of n-alkanes and cyclic-alkanes with alkenes, …
-
Severe plastic deformation in highly immiscible copper alloys: self-organization
… are well known to refine the microstructures of metals and alloys into non-equilibrium states with nanometer-size grains, and they are gaining widespread interest for processing bulk nanostructured materials. Existing models like the “Driven System Model” and “Effective Temperature Model” can …
-
A study of the Clausius equation of state.
The purpose of this work is to present an approach and its limitations as applied to the Clausius equation of state to calculate the volume and the heat of mixing. The investigation was begun to continue the research into volume and heat of mixing, specifically through an evaluation of the latest …
-
A study in diffusion
<p>The object of this thesis was to build an experimental apparatus and to study the diffusion of crystal violet in ethanol-water mixtures and diacetone alcohol-water mixtures. In order to validate experimental technique and to check the work of Mouquin Cathcart(1) who postulated compouhd formation …
-
Excess molar enthalpies of binary and ternary systems involving hydrocarbons and ethers
In modern separation design, an important part of many phase-equilibrium calculations is the mathematical representation of pure-component and mixture enthalpies. Mixture enthalpy data are important not only for determination of heat loads, but also for the design of distillation units. Further, …
-
A thermodynamic model for multicomponent melts, with application to the system CAO-MGO-AL₂O₃-SIO₂
A thermodynamic model is proposed for calculation of liquidus relations in multicomponent systems of geologic interest. Mineral-melt reactions are written in terms of liquid oxide components, and balanced on the stoichiometry of liquidus phases. In order to account for non-ideality in the liquid, a …
-
Solubility of aromatic compounds in mixed solvents.
The solubilities of benzene, naphthalene and anthracene were measured in five binary solvent systems. These systems consised of water and one of the following water miscible organic solvents: acetone, acetonitrile, methanol, ethanol, and isopropanol. The measurements were made at intervals of 0.1 …
-
Characterization of block copolymers and polymer blends by inverse gas chromatography
The accuracy and utility of using Inverse Gas Chromatography (IGC) to characterize the microphase structure of block copolymers, and the strength of the thermodynamic interactions between the components of polymer blends and the unlike segments of block copolymers was examined. There were three …
-
The Ethynyl Hydrogen Bond
The nature and properties of the hydrogen bond are discussed with special reference to the ethynyl hydrogen bond. Proof is given of the electron accepting capacity of the C-H group and of the electron donating capacity of the "pi" electron system of aromatic rings. The theory of the calorimetries …
-
Thermodynamics of charge transfer complexes
… and TiCl_4 - diethyl ether form complexes of the types AD and AD_2 where A stands for TiCl_4 and D stand s for the organic donor. The formation constants for the complexes were, for the TiCl_4 - anisole, K_1 = 0.077, K_2 = 0.01; and TiCl_4 - diethyl ether, K_1= 3.0, K_2 = 1.0. The system …
Page 1 of 2