Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"HFCVD"”.

  1. Modeling of fluorocarbon films deposition by HFCVD

    … of a new, one-dimensional, continuous flow HFCVD reactor using a rigorous computational fluid dynamics (CFD) approach. The uniform concentration boundary layer thickness over the substrate is required to achieve good quality films. First the inlet showerhead is simulated to determine the …

    colostate Repository record for Modeling of fluorocarbon films deposition by HFCVD (opens in a new tab)

  2. HFCVD polikristalinių deimantinių sluoksnių sintezė. Struktūros ir elektrinių savybių tyrimas /

    … using Hot Filament Chemical Vapour Deposition (HFCVD). This type of diamond film growth method has many variables in it and thus it needs to be optimised. It was chosen to investigate the effects on film's composition, structure and conductivity by changing synthesis pressure, temperature of the …

    vilnius Repository record for HFCVD polikristalinių deimantinių sluoksnių sintezė. Struktūros ir elektrinių savybių tyrimas / (opens in a new tab)

  3. Advancing Diamond Growth Techniques: Investigating the Impact of Multi-Stage Methane Concentration on Diamond Growth using HFCVD

    … in hot filament chemical vapor deposition (HFCVD), with the goal of achieving high-quality films in shorter growth times. The research investigates how the sequencing of methane concentrations affects the coalescence of diamond seeds, total growth rate and final diamond quality. Previous …

    texas-state Repository record for Advancing Diamond Growth Techniques: Investigating the Impact of Multi-Stage Methane Concentration on Diamond Growth using HFCVD (opens in a new tab)

  4. Interaction of Carbon Nanotubes and Diamonds Under Hot-Filament Chemical Vapor Deposition Conditions

    … of diamond nucleation enhancement by CNT under HFCVD conditions. It is found that the nucleation takes places by etching of the CNT to create a new carbonaceous surface, onto which diamond nucleates. This mechanism is different from the present understanding of the diamond nucleation enhancement …

    uiuc Repository record for Interaction of Carbon Nanotubes and Diamonds Under Hot-Filament Chemical Vapor Deposition Conditions (opens in a new tab)

  5. Study of purification and growth of single-walled carbon nanotubes

    … a hot filament chemical vapor deposition (HFCVD) method has been developed to grow vertically aligned single-walled carbon nanotubes (VA-SWNTs). Silicon substrates decorated with islands of iron were rapidly inserted into a preheated furnace in which a hot filament (temperature greater than …

    rice Repository record for Study of purification and growth of single-walled carbon nanotubes (opens in a new tab)

  6. Hot Filament Chemical Vapor Deposition of Semiconducting Boron Carbide Thin Films

    … mind, a hot filament chemical vapor deposition (HFCVD) system was designed and built in order to grow thin films of boron carbide onto n-type silicon substrates. Deposition was accomplished via the thermal decomposition of B<sub>2</sub>H<sub>6</sub> [diborane] and CH<sub>4</sub> [methane].</p>

    ut-knoxville Repository record for Hot Filament Chemical Vapor Deposition of Semiconducting Boron Carbide Thin Films (opens in a new tab)

  7. Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces

    … hot filament chemical vapour deposition (HFCVD) and ion beam etching (IBE). The HFCVD is used to deposit diamond on silicon substrates; and the IBE is used to etch the diamond crystalloid with a certain angle with respect to the coating surface to obtain an unsymmetrical-triangle …

    sask Repository record for Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces (opens in a new tab)

  8. Synthesis of Molybdenum oxide nanowires and their facile conversion to Molybdenum sulfide.

    … oxide nanowire arrays are synthesized using HFCVD, then converted to Molybdenum sulfide under relatively benign conditions. These inexpensive nanowires have applications in photovoltaics, Li ion batteries and much more. Molybdenum oxide nanowire arrays were successfully synthesized. The …

    louisville Repository record for Synthesis of Molybdenum oxide nanowires and their facile conversion to Molybdenum sulfide. (opens in a new tab)

  9. Large-Area Single-Crystal Diamond Films Via Hot Filament Chemical Vapor Deposition

    … Hot Filament Chemical Vapor Deposition (HFCVD). This is a twenty-fold increase in cross-sectional area and therefore, an increase by the same amount in the probability of interaction with incident neutrons. Two hundred micrometers is estimated as the minimum thickness required for a …

    missouri Repository record for Large-Area Single-Crystal Diamond Films Via Hot Filament Chemical Vapor Deposition (opens in a new tab)

  10. Propagation of Rayleigh waves in thin films

    … and hot filament chemical vapor deposition (HFCVD) on Si (100) and Si (111) substrates. Spectra from XPS (X-ray Photoelectron Spectroscopy) were used to determine the chemical composition of the films and SEM (Scanning Electron Microscope) micrographs were taken to study the morphology of the …

    wm-mary Repository record for Propagation of Rayleigh waves in thin films (opens in a new tab)

  11. Fabrication of Carbon Structures on Ultra-Wide Bandgap Oxides

    … using hot filament chemical vapor deposition (HFCVD) where the presence of densely packed diamond tetrahedra cells in the Q-carbon seed layer act as nucleation sites. The utilization of a Q-carbon seed layer resulted in the production of higher-quality diamonds with less graphitic content and …

    texas-state Repository record for Fabrication of Carbon Structures on Ultra-Wide Bandgap Oxides (opens in a new tab)

  12. Chemical vapor deposition of diamond thin films on titanium silicon carbide

    … stage growth of diamond thin films on Ti3SiC2 by HFCVD indicated that a nanowhisker-like diamond-graphite composite layer, different from diamond nucleation on Si, initially formed on the surface of Ti3SiC2, which resulted in high diamond nucleation density. These results indicate that Ti3SiC2 has …

    sask Repository record for Chemical vapor deposition of diamond thin films on titanium silicon carbide (opens in a new tab)

  13. Diamond Based-Materials: Synthesis, Characterization and Applications

    … stress evaluated by the Raman shift showed that HFCVD polycrystalline diamond film had tensile stress at the corner and compressive stress in the center, whereas MPECVD polycrystalline diamond film had compressive stress on the whole surface. The roughness of MPECVD was higher than that of HFCVD. …

    usf Repository record for Diamond Based-Materials: Synthesis, Characterization and Applications (opens in a new tab)

  14. Chemical Mechanical Planarization of Electronic Materials

    … chemical vapor deposition technique (HFCVD). The synthesized microcrystalline diamond (MCD) films were characterized using Raman Spectroscopy, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and X-ray Diffraction (XRD). The CMP performance of the MCD and …

    usf Repository record for Chemical Mechanical Planarization of Electronic Materials (opens in a new tab)

  15. Interface Engineered Diamond Coatings for Dry Machining Applications

    … microcrystalline diamond coatings deposited by HFCVD synthesis, the estimation of the resulting diamond adhesion by Rockwell indentations and Raman spectroscopy, and finally, the evaluation of the dry machining performance of the diamond coated tools on A390 aluminum alloys. Scanning electron …

    usf Repository record for Interface Engineered Diamond Coatings for Dry Machining Applications (opens in a new tab)

  16. Development of carbon nanotubes with a diamond interlayer for field electron emission and heat transfer applications

    … Hot Filament enhanced Chemical Vapor Deposition (HFCVD). The structure and chemical states of the diamond films and CNTs were characterized by Scanning Electron Microscopy (SEM), cross-sectional Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Raman spectroscopy, synchrotron based …

    sask Repository record for Development of carbon nanotubes with a diamond interlayer for field electron emission and heat transfer applications (opens in a new tab)

  17. Growth And Characterization Of Nitride Semiconductors on Chemical Vapor Deposited Diamond

    … of precursor stoichiometry of hot filament CVD (HFCVD) on diamond’s morphology, phase purity and crystal structure. By varying the methane concentration in hydrogen in the range of 1.5-4.5%, it was found that film thickness, grain size, roughness and non-diamond carbon (NDC) of polycrystalline …

    texas-state Repository record for Growth And Characterization Of Nitride Semiconductors on Chemical Vapor Deposited Diamond (opens in a new tab)