Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"HOMOGENIZATION TEMPERATURE"”.
-
ANALYZING VARIATION IN DISPERSOID FORMATION IN ALUMINUM ALLOYS BY MINOR CHANGES IN HOMOGENIZATION TEMPERATURE
The homogenization of billets in the aluminum extrusion industry is a critical step that removes chemical segregation from casting, dissolves low melting point phases, forms nanoscale dispersoid phases, and promotes the beta to alpha transformation of iron particles in the matrix. With ever …
-
Experimental Study of the PVTX Properties in Part of the Ternary System H₂O-NaCl-CO₂
… for pressures between about 1 to 6 kbar, temperatures of 300° to 800°C, and fluid compositions up to 40 wt% NaCl and 20 mol% carbon dioxide, both relative to water. This was accomplished by using the synthetic fluid inclusion technique in conjunction with conventional microthermometry, a …
-
Fatigue characteristics and microstructural analysis of thermomechanically-processed, high-magnesium aluminum-magnesium alloy
… to determine the effect of cooling rate from the homogenization temperature on the tensile properties and fatigue characteristics of the alloys.
-
Simulation and design of the homogenization process of 6xxx extrudable aluminum alloys: development of design rules for high extrudability
… and improved through a carefully designed homogenization process. So far the problem has been tackled in a rather empirical way, involving intense trial-and-error laboratory or even industrial experiments to figure out the effect of alloy chemistry and homogenization process parameters such …
-
Application of fluid inclusions in geological thermometry
… provide valuable information on the pressure, temperature and fluid composition (PTX) of the environment of formation, hence understanding PTX properties of the fluid inclusions is required. The most important step of a fluid inclusion study is the identification of Fluid Inclusion Assemblages …
-
Raman Spectroscopic Investigation of the Speciation of Uranyl (VI) and Thorium (IV) Ions in Chloride-Bearing Aqueous Solutions under Hydrothermal Conditions
… for a uranyl chloride aqueous solution at temperatures ranging from 25°C to 500°C at the chloride concentration of 6M and uranium (vi) concentration of 0.05M. The measurements were taken by sealing the sample in a hydrothermal diamond anvil cell (HDAC) which enabled spectra acquisition at …
-
Experimental Study of the PVTX Properties of the System H₂O-CH₄
… terrains. Knowledge of the PressureVolume-Temperature-Composition (PVTX) properties of the H₂O-CH₄ system is necessary to understand the role that these fluids play in different geological environments. In this study the properties of the H₂O-CH₄ fluid system at elevated temperatures and …
-
Δομημένα συστήματα λίπους γάλακτος και φυτικών ελαίων για την παραγωγή καινοτόμων τροφίμων
… in alterations in fractions’ crystallization temperature. DSC, microstructure, and rheological results showed modifications in thermal properties and microstructure among the fractions. Additionally, the gelling ability of the fractions was studied through CLSM, DSC, and rheology for the …
-
Rheology and microrheology at high pressures
… at given environmental conditions (pressure, temperature, humidity etc.) are of broad interest and valuable in multiple applications in the energy, food and polymer industry. I use scattering, rheology and microrheology to probe the dynamics and the linear and non-linear viscoelastic …
-
Reenvelopment of native and processes butteroils into globules resembling milk lipid globules in functional properties
… minutes for a 15 ml sample, and emulsification temperature of 42°C. Optimized conditions were used in scale-up reformulation of 750 ml samples replacing ultrasound with homogenization. Treatments included both native butteroil and reduced-cholesterol reformulated creams and unwashed natural …
-
Composition of fluid inclusions from the cave-in-rock bedded-replacement fluorite deposits in the Illinois-Kentucky district
… of the Ozark Plateau districts. Fluid inclusion homogenization temperature and salinity relationships suggest that MVT mineralization in the Illinois-Kentucky district was produced from a mixture of at least three brines, two of which had relatively high salinities and temperatures and the third …
-
Fluid Inclusion Characteristics in Magmatic-Hydrothermal Ore Deposits
… system. Thus, if we know the pressure-volume-temperature-composition (PVTX) properties of H₂O-NaCl solutions, it is possible to interpret the PTX trapping conditions, which is important for understanding the processes leading to the generation of the hydrothermal system and ore mineralization. …
-
Geochemistry and Petrography of Beartrack Mine, Lemhi County, Idaho
… data from the base metal quartz veins yield two homogenization temperature ranges between 204-2160C and 241-2470C. Optically determined paragenetic relationships in these veins, showed two stages of quartz veining, which corresponds with fluid inclusion data. Those temperatures also fall in the …
-
Microstructural evolution during the homogenization heat treatment of 6XXX and 7XXX aluminum alloys
Homogenization heat treatment of as-cast billets is an important step in the processing of aluminum extrusions. Microstructural evolution during homogenization involves elimination of the eutectic morphology by spheroidisation of the interdendritic phases, minimization of the microsegregation …
-
Hydrothermal fluids and Cu-Au mineralization of the Deep Grasberg Porphyry Deposit, Papua, Indonesia
… during ore formation. Some changes in the temperature and composition of the hydrothermal fluids in the Deep Grasberg are recorded in quartz crystals. Textures observed using scanned luminescence of 32 samples of quartz veins from the Dalam, MGI, and Kali reveal a complex vein history in …
-
Fluid inclusion and trace element studies of the gem pegmatites of Mt. Antero, Colorado
… and secondary inclusions. Salinities and homogenization temperatures (Th) of these inclusions define five distinct groups. The earliest primary fluid inclusions occur in outer growth zones of gem aquamarines. These inclusions have salinities of 2.6 - 3.9 wt.% and homogenize at 350°- 360°C. …
-
THE FORMATION MECHANISM OF α-PHASE DISPERSOIDS AND QUANTIFICATION OF FATIGUE CRACK INITIATION BY EXPERIMENTS AND THEORETICAL MODELING IN MODIFIED AA6061 (AL-MG-SI-CU) ALLOYS
… addition of Mn, Cr and Cu were homogenized at temperatures between 350 ºC and 550 ºC after casting. STEM experiments revealed that the formation of α-Al(MnFeCr)Si dispersoids during homogenization were strongly affected by various factors such as heating rate, concentration of Mn, low …
-
MODELOS EN DINÁMICA DE FLUIDOS COMPUTACIONAL PARA APLICACIONES AMBIENTALES Y SU VALIDACIÓN CON SISTEMAS DE ADQUISICIÓN DE DATOS BASADOS EN REDES DE SENSORES INALÁMBRICAS
… such as the air pollution, climate control or homogenization temperature and humidity indoors, or understanding and extinguishing forest fires pose a constant challenge to the personnel responsible and especially to the researchers. Compete this problematic economic sectors where greenhouse …
-
Characterization of Fluids Associated with Vein-type Uranium Mineralization in the Beaverlodge Uranium District, Northern Saskatchewan: Field, Petrographic, Fluid Inclusion and C-O Isotope Studies
… of liquid-dominated fluid inclusions show homogenization temperatures (Th) from 78o to 330oC (mainly 100o to 250oC), and salinities from 0.2 to 30.8 wt% NaCl equivalent (clustered in two ranges, 0.2-5.9 wt% NaCl equiv and 18.2-30.8 wt% NaCl equiv). The average homogenization temperature of …
-
Geological evolution of the world class Gejiu Ore District, SW China: information from magmatism, mineralization and microanalysis studies
… then to a Pb-Zn zone. New data indicate that the homogenization temperature and salinity of the ore-forming fluid display continuous variations in different mineralization stages, which is a typical characteristic of the granite-related hydrothermal deposits. Sulfur isotopes of various sulfides, …
Page 1 of 2