Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"HOT-FORGING"”.
-
Some Effects of Friction and Lubrication During Hot Forging Steel.
… test to aid the selection of a lubricant in hot forging of steel. Lubricant effectiveness under difficult forging conditions has therefore been investigated. An experimental test rig was designed, developed and constructed in which hot specimens of temperature 900°C to 1300°C were forged. The …
-
Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm
… in mass to its cast aluminum benchmark. A hot forging tool was designed and developed to produce forgings of this control arm design in a single-hit operation. The as-forged component will have has a shape of a near-complete arm with excess flash, requiring subsequent trimming and finishing …
-
Investigation of Surface Roughness and Lay on Metal Flow in Hot Forging
A study was conducted to explore the possibility of using machining marks (i.e. surface roughness and lay) as a parameter for die design. The study was performed using 6061-T6 aluminum 1.25" diameter rounds and 0.25" square bar stock to investigate the effects of temperature, surface roughness, and …
-
The identification and modelling of the dominant failure mode in hot forging tooling
… and modelling of the dominant failure mode in hot forging tooling, used in the production of nickel based superalloy compressor blades. A preliminary study identified the most frequently occurring part defects that cause tool failure. The forming process was characterised, relevant tooling …
-
Computational generation of wear maps for H13 tool steel in open die hot forging
Forging tools are associated with as much as 40% of the costs any forging operation and consequently understanding the causes of their failure is key to improving productivity. The literature suggests that wear is responsible for 70%of failures in hot forging with abrasive and adhesive wear being …
-
Novel experimental methodology for the investigation of recrystallisation during industrial hot forging of Inconel 718
… availablemicrostructural models for industrial forging processes remains open. The main reason forthat is the complexity of the thermo-mechanical history and, related to this, the combinationof operative microstructural mechanisms. An original methodology using forging trials, basedon industrial …
-
Fabrication of Alkaline-Earth Fluoride Ceramics for High-Power Lasers via Fusion Casting and Hot Forging
… by fusion casting and their ceramization via hot forging. Specifically, we have evaluated the processing conditions for fusion casting of Nd:SrF2 and shown how reducing the cooling rate from 25°C/hr to 1.5°C/hr can increase optical transmission up to the Fresnel limit in the near-IR. …
-
The Influence of Die Temperature and Hardness on the Wear of No. 5. Die Steel Under Hot Forging Conditions
… on the wear of No. 5. Die Steel, under hot forging conditions. Tests were performed under controlled conditions in an automated experimental press, the material, in the form of flat die inserts, being worn by the regular upsetting of cylinders of hot stock between the insert faces, and …
-
Application of wear resistant coatings by the brush plating technique
… using a pin and disc technique and a simulated hot forging test, and by industrial trials involving the "on site" plating of hot forging dies and cold pressing tools. It was concluded that the electrolytes developed in tl1is work enabled cobalt alloys containing 6% Mo or 8% W to be deposited at …
-
Development of a dimensional measurement system for hot forged parts at elevated temperature
… metal forming operations, such as hot forging, is key to guaranteeing product quality, enhancing material utilization, and ensuring process consistency. Conventional post-process measurement methods, including coordinate measuring machines (CMMs) and callipers, involve cooling prior …
-
A phenomenological approach to the prediction of material behaviours during co-sintering
… An experimental approach with free sintering and hot-forging measurements is favoured in this work. The prediction of the sintering kinetics is addressed with the construction of a map of sintering kinetics data: the Master Sintering Diagram (MSD). The MSD is based on a generalized equation for …
-
Investigation on fabrication, interface formation, and properties of hot-processed titanium-doped copper/diamond composites
… copper/diamond composites fabricated via hot-processing techniques, hot-forging and hot-pressing, with focuses on optimizing fabrication parameters, elucidating interface formation mechanisms, and establishing the relationship between the interfacial microstructure and composites …
-
Failure mechanisms in surface treated tool steels
… associated with cyclic and static stressing of hot work tool steels has been undertaken. The materials used were BH13 and Ni-Cr-Mo (No.5) die steels, both were evaluated in the hardened and tempered conditions and after the application of various surface treatments. Five test procedures were …
-
Wear resistance of surface treated metal-working tools
… in repair and replacement can be achieved. Since hot forging subjects dies to some of the most severe conditions experienced in metal-working, it was chosen as the wear resistance test in this investigation. The two types of steel employed were No. 5 die steel and H.13 hot work steel. The surface …
-
Thermomechanical study of H13 tool steel
H13 is a hot work tool steel used as extrusion and forging dies in metal forming industries. It is characterized by its high thermal stability and wear resistance. For large size tools, H13 alloy bars are generally produced by hot open-die forging of cast ingots. However, the selection of the hot …
-
Microstructure-based process modeling of open die forging of a high strength martensitic stainless steel
… components starts with the sequence of casting, forging, quenching, and tempering operations. The main aim of forging the as-cast ingot is to eliminate the casting defects that occur during solidification including shrinkage, segregation, porosity, non-metallic inclusion, and cracks. These …
-
Production of two-part components by powder forging
… in this thesis is an investigation of the hot forging of powder preforms in which different powders are used in various parts of the forging. A consideration of the possible advantages and applications of this type of forging is given with reference to the relevant published literature. In …
Page 1 of 3