Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"HSLA Steel"”.
-
Nonmetallic inclusions in HSLA steel weldments
… currently funding a program for certification of HSLA steels to replace the HY series of high strength steels for structural fabrication. Integral to this program is the certification of welding consumables for use with these steels. The size, distribution and composition of nonmetallic inclusions …
-
Investigation of low oxygen HSLA steel weld metal
… development in high strength low alloy steel weldments is mainly dependent on acicular ferrite, which nucleates on oxide inclusions. However, with the gas tungsten arc process, it is difficult to manipulate weld pool oxygen content to achieve the needed level for optimal acicular ferrite …
-
Austenite grain growth behaviour of HSLA steel during reheating treatment
… between 950 ºC and 1300 ºC of as-cast Al-Nb steel (containing 0.019 wt% Nb and 0.057 wt% Al) and rolled Nb-containing steel (containing 0.028 wt% Nb and 0.031 wt% Al) have been investigated. In particular the role of microalloying element segregation during casting and, hence the spatial …
-
Novel Techniques for Estimating Energy Dissipation Capacity of HSLA Steel Microstructures
… the toughness of High-Strength Low-Alloy (HSLA) steels using only microstructural information. The approach is validated using three Dual-Phase (DP) automotive steels and two pipeline steel grades. For the DP steels, validation is carried out using tensile test results and notched …
-
Fatigue Behavior of a Quenched and Tempered Nb-bearing HSLA Steel
… and tempered Nb-bearing high strength low alloy (HSLA) steel (Fe-0.08C-1.43Mn-0.17Mo-0.034Nb) heat treated to give two different microstructures of the same yield strength has been studied by light and electron microscopy, low and high cycle fatigue tests, x-ray line profile analysis, stress …
-
Data-driven metallurgical design for high strength low alloy (HSLA) steel
<p>Metallurgical design of microalloyed steel used to be a challenge due to its multivariate nature. Over ten kinds of microalloying elements and multi-step processing routes have complex interactions and different contributions to the final mechanical properties. Data-driven model is able to throw …
-
A study of austenite grain growth in a Ti-Nb HSLA steel
… been studied in a Ti-Nb microalloyed low carbon steel in the temperature range of 1100 to 1250°C, employing a Gleeble® 1500 thermomechanical simulator. No significant grain growth has been observed below 1100°C. The onset of grain growth at 1150°C, both normal and abnormal, is related to the …
-
Reheat zone microstructural development and toughness in selected HSLA steel weld metals
Includes bibliographical references.
-
Reheat zone microstructural development and toughness in selected HSLA steel weld metals
Includes bibliographical references (pages 169-179).
-
Relationship between Microstructure, Properties and HICC Resistance of HSLA steel weld metals
… (HICC) resistance of high strength low alloy (HSLA) steel weld metals were studied in this investigation. The weld metals were designed in a previous work. Their microstructures were characterised by optical and electron microscopy (FEG-SEM and TEM). Microphases, such as non metallic inclusions …
-
Development of bimodal grain structures and their effect on toughness in HSLA steel
… (i.e. mixed coarse + fine grain sizes) in TMCR HSLA steel plates, as-continuously cast HSLA steel slabs with varying microalloying additions (Ti, Nb and V) were reheated to temperatures in the range 1000-1300 °C and deformed at 1110 °C and 980 °C temperatures in Gleeble 3500. The interdendritic …
-
The influence of environment on the fatigue behavior of HF-80 HSLA steel
Single-pitted specimens of HF-80, a HSLA steel, were tested in laboratory air and in 1 M NaCl solution to study the influence of a corrosive environment on its fatigue life.
-
Control of Post-Weld Fracture Toughness in Friction Stir Processed X-80 HSLA Steel
… investigates the fracture toughness of FSW X-80 HSLA steel welds. Weld cooling rate and peak temperature were varied among welds; indirectly manipulated through FSW travel speed, rpm, and weld preheat. Fracture toughness was tested according to ASTM 1820 standard along the weld centerline using …
-
A Microstructural and Damage Investigation into the Low Temperature Impact Behavior of an HSLA Steel
Stelco, a Canadian steel making company produced a hot rolled coil of a G40.21 50WT High Strength Low Alloy (HSLA) steel. The material needed to meet a demanding Drop Weight Tear Test (DWTT) specification at -35℃. The coils produced using a coiling temperature of 540℃ did not meet the DWTT …
-
QUANTIFYING THE EVOLUTION OF STRENGTHENING MECHANISMS FOR COMMERCIALLY PRODUCED NIOBIUM AND TITANIUM HSLA STEEL SHEET
… commercially produced high-strength, low-alloy (HSLA) steel hot-rolled sheet is crucial to avoid the downgrading of product that does not meet strength specifications. In addition to contributing to precipitation strengthening through the growth of niobium-titanium carbides ((Nb,Ti)-C), niobium …
-
The effect of aging treatment on the microstructure and properties of copper-precipitation strengthened HSLA steel
The high strength low alloy (HSLA) steels which are being developed as replacements for the HY family of steels ire low carbon steels which derive their strength in part due to the precipitation of fine coherent copper particles formed during a quench and aging heat treatment. HSLA-100 is being …
-
Physical metallurgical basis for heat-affected zone and base-plate properties of a microalloyed HSLA steel, A
Includes bibliographical references.
Page 1 of 3