Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Habit plane"”.
-
The role of defects during precipitate growth in a Ni-45wt% Cr alloy
… No regular defect structure can be found on the habit plane, or broad face, of the lath except for atomic-scale structural ledges. High resolution electron microscopy (HREM) observations show the (12¯1)<sub>f</sub> habit plane is coherent and is a good matching interface. Based upon conventional …
-
Interfacial structure of delta phase in Inconel 718 and the selection of precipitate habit planes
… microscopy (TEM) observations, the average habit plane was confirmed to be (111)<sub>γ</sub> which is consistent with previous reports. A parallel array of misfit dislocations with Burgers vector b=1/6[112̅]<sub>γ</sub>, (designated M1) are always observed lying along the [11̅0] direction. …
-
THREE-DIMENSIONAL CHARACTERIZATION OF MORPHOLOGY AND CRYSTALLOGRAPHY OF LATH MARTENSITE IN MARTENSITIC STAINLESS STEELS
… presents novel insights into the morphology, habit plane variations, and boundary networks of lath martensite, contributing to a refined understanding of its formation mechanisms and mechanical implications. The microstructural analysis reveals the hierarchical subdivision of martensite into …
-
A study of α/β boundaries in a Zr-2.5 wt % Nb alloy
… usually forms as intragranular plates. The habit plane of an α plate is characterized by the regularly spaced dislocations, parallel to the long axis of the α plate. These dislocations, about 10nm apart, have a Burgers vector [0 1 0] with respect to β phase. The orientation relationship …
-
Deuteride Precipitation and Decomposition in the Single Crystal Palladium-Deuterium System
… and desorption, but also alters the observed habit plane of the large deuteride plate; (100) for the well-annealed Pd matrix and (110) for the deformed Pd matrix.
-
The role of interfacial structure in the evolution of precipitate morphology
… form with the lowest strain energy on the broad habit plane of coherent precipitates. On a partially coherent lath the strain energy is lowest for a ledge located on the facet perpendicular to the crystallographic invariant line. This situation favors precipitate lengthening in the invariant line …
-
ON THE CRYSTALLOGRAPHY OF BAINITIC TRANSFORMATION IN STEELS
… results on orientation relationship, habit plane and good matching direction between ferrite and cementite. The calculated orientation relationship was used in an NCS (near coincident site) model to describe several possible edge facets of cementite precipitates. The major observed …
-
An age hardening study of magnesium-thorium-manganese alloys
… has a Mg₃Cd (DO₁₉) type structure. The basal plane of the Mg₃Th discs lie parallel to the matrix basal plane which is also the habit plane of this precipitate. Basal slip and {101̄2} twinning, the principal deformation modes, shear the G.P. zones but not the Mg₃Th discs"--Abstract, page iii.
-
Crystallography of low alloy iron martensites
… plates were consistent with a {145}M habit plane. Optical studies of the martensite surface shears within prior austenite grains revealed that 4 shear variants generally occur. However grains containing 5 or more shear variants could be found which appears to suggest an austenite habit …
-
Understanding the Role of Defects in the Microstructural Evolutions in Metastable β Titanium Alloys
… critical role of the inclination angle between habit plane of α and grain boundary plane in determining the morphology of grain boundary α precipitates. Secondly, the nanoscale substructures of a novel high-indexed {10 9 3} twin and its influence on the formation of hierarchical α microstructure …
-
Phase transformations in the silver-aluminum system
… two matrix grains. Measurements of the matrix habit plane suggested that a possible orientation relationship existed between the precipitate and that grain into which no development occurred. In this case the precipitate nucleated in one grain but grew into the opposite grain. Precipitates …
-
Transformation elasticity in polycrystaline Cu-Zn-Sn alloy
… martensite. The experimentally determined habit plane for the thermal and the stress induced martensite were in moderate agreement with the planes predicted by the phenomenological martensite theory (W.L.R.) assuming a {110} <1Ī0> microscopic shear.
-
Microstructural characterisation and modelling of dilute magnesium-tin-aluminium alloys
… through observation to the lack of a common habit plane or growth direction for these pyramidal precipitates. The obtained data has then been used to model the nucleation and growth of the precipitates using a Kampmann-Wagner Numerical framework, where key parameters such as the diffusion …
-
High temperature deformation of cobalt single crystals
… been found that the (111)/ (0001) transformation habit plane may be controlled by deformation. Recrystallisation may occur if two slip systems operate, but this is a function of crystal orientation. Slip may be induced on an unfavourably orientated glide plane in the fee phase, and this indicates …
-
Precipitation reactions in the tungsten-nickel-iron heavy alloy system
… the precipitates to be plate-like with a {100} habit plane, and the strain in the W lattice normal to the precipitates was found to be tensile in nature.</li> </ol> <p>Matrix-composition alloys were manufactured to simulate the andgamma;-phase in the 90W-5Ni-5Fe alloy. Metallographic …
-
The growth and deformation of cobalt crystals
… twins. The thin twins have a {11 2̄̅̅1}habit plane. Metallographic examination of crystals pulled to large extensions and electro-polished to remove slip lines showed small needle-like markings, probably fine twins. In addition to the deformation work, certain observations have been made …
-
The effect of 0-8 wt. % iron on transformations of alpha phase Ni-Mo-Fe alloys with Ni:Mo ratio equal to 4:1
… for these LR0 beta domains is proposed with the habit plane relations (001)β//(00l)α, (il0)s//(i20)α. The domains at 850°C are tetragonal in space with dimensions 2x2xl um. The major morphology is the "walls" of domains along {l00}α planes. A second morphology is …
-
Crystal Plasticity based Formability Analysis of Transformation Induced Plasticity Steels
… criterion, based on the micromechanics of habit- plane interaction, was developed to initiate transformation. This model inherently captures the triaxiality effect of martensite through the accumulated shear strain on slip systems. Simulations are calibrated and compared to experimental …
-
Prediction of the Mechanical Properties of Molecular Crystals Based Upon Their Crystallographic Structure
… tool for observing the mechanical properties. Plane rugosity and interlock properties were calculated for the first time by taking the crystallographic properties of each compound. The prediction model comprises of three main components. Firstly, the identification of likely dislocation Burgers …
-
Morphology, structure and growth kinetics of bainite plates in the β' phase of A Ag-45 AT. PCT Cd Alloy
… [100]f and [011]b 4.3° from the stacking fault plane pole [111]f. The habit plane of the bainite plates, determined by two surface trace analysis, was close to (144)b. The surface relief of the plates was observed by the interference microscopy. It was in the form of a simple tilt indicating an …
Page 1 of 2