Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 227 for “"Half Bridge"”.
-
Merged Half-Bridge 48V/1V Voltage Regulator
… 48V voltage regulator based on a merged half-bridge converter with current-doubler rectification (MHB-CDR). The proposed topology reduces the effective primary side voltage applied to the transformer by merging two asymmetrical half-bridge cells, allowing a practical transformer turns …
-
Evaluation of Advanced Silicon Carbide Half-Bridge Modules
Half-Bridge modules are essential to the design of power electronic systems such as dc-to-ac converters, synchronous dc-to-dc converters, and motor drivers. Silicon carbide (SiC) modules are a state-of-the-art solution for the development of high power and high temperature systems; this is due the …
-
Control And Topology Improvements In Half-bridge Dc-dc Converters
… management concepts are introduced. The active bridge-capacitor tank clamping and FET-diode-capacitor tank clamping are close ideas, which transfer the leakage inductor energy to clamping capacitor to prevent oscillation between leakage inductor and junction capacitor of MOSFETs. The …
-
Simulating and testing a DC-DC half-bridge SLR converter
In order to obtain maximum battery lifetime and efficient operation, rechargeable batteries require unique charging profiles with an end-state, low current trickle charge. The series loaded resonant (SLR) charging system presented in this thesis meets the needs of an efficient, sensor integrated, …
-
Design of a digital control system for a half-bridge converter
… control system for a module consisting of two half-bridge converters has been replaced by a digital control system derived in this thesis. The digital control system has been derived using the existing analogue control system as a reference to find the important functions that has to be …
-
Digital Control Of Half-Bridge Dc-Dc Converters With Current Doubler Rectification
… a valid model. The current doubler rectified half bridge (CDRHB) DC-DC converter is suitable for high current low voltage applications. In this thesis, the topology operations are analyzed and then the unified state space model, analog small signal model and digital small signal model are …
-
Design and Development of a Half-Bridge LLC Resonant Converter Laboratory Module
… thesis presents the design and development of a half-bridge LLC resonant converter laboratory module that allows students to gain a thorough understanding of the converter through a hands-on laboratory experiment. With the constructed 5 V output lab module, students can change the converter’s …
-
Modeling, analysis, and control of circulating currents in half-bridge modular multilevel converters
In operating Modular Multilevel Converters (MMCs) the common practice is to eliminate circulating currents using a Circulating Current Suppression Controller (CCSC). This practice reduces converter losses and submodule capacitor voltage ripple; it also allows usage of semiconductors with lower …
-
Control of Switch-mode Power Supplies A digital approach for half-bridge converters
… for a switch-mode power supply (SMPS) based on a half-bridge topology has been implemented. The SMPS originally has an analog control board. This original control board has been removed and replaced by a digital controller. Hardware for output voltage and current measurement was constructed as …
-
A Low-Inductance SiC Bare-Die Half-Bridge Power Module for Traction Inverter Applications
… validation of a modular bare-die SiC half-bridge power module that addresses these challenges through integrated electro-thermal design. A modular ultra-low-parasitic bare-die SiC half-bridge architecture is developed in which additively manufactured, liquid-cooled multifunctional …
-
Multifaceted Codesign for an Ultra High-Density, Double-Sided Cooled Traction Inverter Half Bridge Module
… a high-density 1.7 kV, 300 A SiC MOSFET half-bridge power module tailored for a 280-320 kW, 2-level inverter configuration. Co-designed with the busbar and gate driver, the custom power module stresses efficient heat dissipation, minimized parasitic inductance, and a compact footprint. …
-
Impact of Device Parametric Tolerances on Current Sharing Behavior of a SiC Half-Bridge Power Module
… fabrication, and testing of a 1.2 kV, 6.5 mΩ, half-bridge, SiC MOSFET power module to evaluate the impact of parametric device tolerances on electrical and thermal performance. Paralleling power devices increases current handling capability for the same bus voltage. However, inherent parametric …
-
A hybrid, half-bridge, modular multilevel converter circulating current controller for use in inertia deficient power systems
Within modern power systems, conventional synchronous generation (powered by fossil fuels) is increasingly being replaced by inverter-based renewable generation. As the penetration of renewable generation grows, there is an overall decrease in the inertia that exists within the power system. The …
-
Design and Development of a Multi-Port Solid State Circuit Breaker Based on Half Bridge SiC MOSFETs
… so each port’s current divides approximately in half; because conduction loss scales with current squared, the M-SSCB achieves ≈75% reduction in on-state loss relative to a conventional anti-series SiC path without increasing device count. During fault handling, the coordinated controller detects …
-
Single-stage boost integrated asymmetrical half-bridge AC-DC power converter with dual modulation for indoor led lighting
Light emitting diodes (LEDs) for indoor lighting is a promising technology which can lead to major energy saving and cost reductions. The major concerns of improving power factor and regulating the output current ripple with regards to LED drivers has been addressed in this thesis by using dual …
-
A single-phase half-bridge current source inverter (CSI) topology with reduced power semiconductor count for grid-connected applications
… The proposed topology is a dual circuit of Half-Bridge (HB) Voltage Source Inverter (VSI); And similarly, it requires two individual current sources instead of two individual voltage sources. These two individual current sources are created by splitting DC input current by a low-frequency …
Page 1 of 12