Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"Half-Cell Potential"”.
-
Sensitivity of Half-Cell Potential Measurements to Properties of Concrete Bridge Decks
Half-cell potential testing has been recommended as a non-destructive method for assessing the corrosion potential of reinforcing steel in concrete bridge decks. The technique is particularly useful because it can be utilized to evaluate the probability of corrosion before damage is evident at the …
-
An Analysis of the Factors Influencing Electrochemical Measurements of the Condition of Reinforcing Steel in Concrete Structures
… and prisms was evaluated over this period by (i) half-cell potential measurements, (ii) galvanostatic pulse measurements (using the GalvaPulse™ and the potentiostat), (iii) potentiostatic linear polarisation resistance measurements (LPR), (iv) electrochemical impedance spectroscopy (EIS) and (v) …
-
Development of an Index for Concrete Bridge Deck Management in Utah
… inspection, sounding, Schmidt hammer testing, half-cell potential testing, and chloride concentration testing were performed on six 6-ft by 6-ft test areas randomly distributed within the single lane closed to traffic on each deck, and testing protocols followed American Society for Testing and …
-
Development of measurement techniques for evaluation of inhibitors for controlling rebar corrosion in concrete
… the effects of the rebar network on corrosion. Half-cell potential measurements were used to monitor the corrosion behavior of each specimen. In a second time, calcium nitrite, monofluorophosphate and sodium borate were evaluated for their capacity to control corrosion. The various corrosion …
-
Morphology and Detection of Corrosion on Stainless Steel Reinforcement in Concrete
… require a combination of conventional methods (half-cell potential) and advanced electrochemical techniques such as Electrochemical Impedance Spectroscopy, Electrochemical noise, etc. The experimental work focused on further determining whether corrosion of SS in concrete can be detected by …
-
Nondestructive Evaluation Of Corrosion Damage In Reinforced Concrete Aged Slab Specimen
… Thermography (IR), Impact Icho (IE), and Half- Cell Potential (HCP) were performed on the bridge deck specimen by Bridge Diagnostics, Inc. (BDI) and Infrasense. The results of GPR, IR and IE indicated that the deck was in good condition while the HCP measurements indicated little to no …
-
Evaluation of Corrosion Detection Methods in Reinforced Concrete Structures
… ON. Non-destructive techniques analyzed include half-cell potential, linear polarization resistance, galvanostatic pulse technique, connectionless electronic pulse response analysis and four-point electrical resistivity. Generally, corrosion rate as determined by NDT measurements is in agreement, …
-
Chemical treatment of corroding steel reinforcement after removal of chloride contaminated concrete
… subjected to repeated exposure to NaCl solution. Half-cell potential, corrosion rate, and chloride ion concentration measurements were conducted until the indication of active reinforcement corrosion. Chloride contaminated concrete was removed to the rebar level through a grooving process. The …
-
Effect of Stay-in-Place Metal Forms on Performance of Concrete Bridge Decks
… hammer sounding, Schmidt hammer testing, half-cell potential testing, and chloride concentration testing. Because differences in deck age and average cover for the two deck types were found to be statistically significant, the collected data were subjected to analysis of covariance …
-
The reduction of organic compounds of sulfur by metals in liquid ammonia
… for the first time. 2. A metal with a high half-cell potential favors a greater extent of reduction than a lower potential metal. 3. The greater the concentration of ammonium ion as a proton donor, the greater will be the evolution of hydrogen, and the lower will be the extent of reduction. …
-
Nanostructured anode materials for Li-ion and Na-ion batteries
… batteries with graphite anodes the intercalation potential of lithium in graphite is close to the reversible Li/Li⁺ half-cell potential. The proximity of the potentials can result in unintended electroplating of metallic instead of intercalation of lithium in the graphite anode and frequently …
-
Anodic oxidation of cuprous sulphide in aqueous solutions
… in the temperature range 20 to 35° C. Rest potential measurements gave V° = 0.490 volts for the electrode or half cell potential. This is within the limits of accuracy of V° for: Cu₂S —CuS + Cu⁺⁺ + 2e V° = 0.535 + 0.13 volts The discrepancy was thought to be related to the large Cu deficien …
-
Comparative Investigation of Detection Techniques for Chloride-induced Corrosion of Loaded Reinforced Concrete Slabs
… electrochemical impedance spectroscopy, half-cell potential and concrete electrical resistivity mapping. The results showed that concrete quality and moisture content have a direct effect on corrosion activity, and these properties are represented well with concrete electrical …
-
CORROSION INDUCED CRACKING IN CONCRETE
… of impressed current were also studied. Half-cell potential values of embedded bar when the cover cracks and the study of the distribution of stresses on the surface of the specimen using the photoelastic technique were also Investigated. In addition, analytical solutions were obtained to …
-
Durability evaluation of cement-based repair materials used for corrosion-damaged steel-reinforced concrete structures
… rapid chloride permeability (RCP), and half-cell potential. However, the relationship between each durability test method and their correlation with compressive strength measurement have not been fully understood. So, in this study, we aim for using multiple testing techniques, …
-
Mitigation of Corrosion in Continuously Reinforced Concrete Pavement
… crack mapping, dust sampling, core sampling, and half-cell potential measurements of CRCP sections in South Dakota. Laboratory work consisted of chloride ion analysis on core and dust samples, and SEM analyses on the reinforcement in core samples obtained from CRCP in South Dakota. The condition …
-
Corrosion Performance of Carbon and Galvanized Steel in Calcium Silicate Cement
… hydration like OPC. CSC is being explored as a potential alternative to OPC, however, there is little to no information on its corrosion related durability. The investigation presented in this thesis considers two CSC formulations meanwhile also comparing different steel performances in the …
-
ASSESSMENT OF CORROSION OF STEEL IN CONCRETE STRUCTURES
… of reinforcement is of great practical interest. Potential measurements were conducted on reinforced concrete structures using a copper - copper sulphate ( Cu / CuSO4 ) half cell. The potential measurement technique is an important tool in diagnosing the present and future performance of existing …
-
Non-Destructive Bridge Deck Condition Assessment with a Probability-Based Deterioration Threshold
… for ground penetrating radar and volts for half-cell potential), making data interpretation and comparison difficult for bridge owners and practitioners. The deterioration threshold, or the transition between healthy and deteriorated areas, is essential in understanding NDE data. However, …
Page 1 of 3