Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"Hall sensor"”.
-
Analysis and improvement of low precision Hall-sensor-controlled brushless dc motors
Hall-sensor-based Brushless dc (BLDC) motors are becoming very popular in wide range of applications, mainly due to their low cost, high efficiency, and reliable operation as compared to the conventional brushed motors. These machines have been extensively researched in the literature mainly under …
-
Techniques for low-noise high-bandwidth hall sensor readout : inherent anti-aliasing and randomized spinning
… voor het verbeteren van een magnetische sensoruitlezing. Eén techniek, genaamd in-de-kring bemonstering, zorgt ervoor dat er zo weinig mogelijk nauwkeurigheid wordt verloren wanneer de sensordata wordt overgebracht naar het digitaal domein. Een andere techniek, genaamd gerandomiseerd Hall …
-
Hall sensor-based locking electric differential system for BLDC motor driven electric vehicle with independent wheel drives
… algorithm is implemented by processing the Hall sensor signals of the considered motors and driving them with a single set of “averaged” Hall signals, thereby operating the motors at the same speed and angle. A detailed switch-level model of EDS embedded with the proposed Sync-Lock Control …
-
Multi-degree of freedom position sensor for planar motors
… of freedom (DOF), non-contact position sensor for a magnetically levitated planar motor. Planar motors are intended to replace X-Y stages in various manufacturing processes resulting in higher accuracy, higher speed, and no friction. To obtain position feedback, previous planar motors …
-
Active stabilization of the magnetic sensitivity in CMOS Hall sensors
Hall sensors are widely applied as magnetometers, position sensors, and current sensors in countless automotive, industrial, and consumer products. Unfortunately, the sensitivity of integrated CMOS Hall sensors is affected by the influence of temperature and mechanical stress leading to a …
-
Utveckling av fordonsprototyp för analys av låghastighetskörning
… UNO Q, which was used as the control unit. Hall sensors were used to measure speed, while an MPU-6050 accelerometer was used to measure acceleration. To improve the reliability of the acceleration values, sensor fusion was used by combining data from the hall sensor and the accelerometer. …
-
Advanced calibration methods for nonlinear multisensor systems
… advanced calibration methods for nonlinear multisensor systems (MSSs). The application of half-blind calibration (HBC) is ex- tended to nonlinear MSSs, and a probabilistic calibration method based on Bayesian inference is investigated. The effectiveness of the methods is evaluated using a …
-
Maximum torque per Ampere and maximum torque per Voltage operation of brushless DC motor drive systems with extended switching schemes
Hall-sensor-controlled brushless dc (BLDC) motors are widely used in many electromechanical applications due to their simplicity, low cost, and good torque-speed characteristics. The conventional commutation methods include the 120-degree and 180-degree switching logics. For these commutation …
-
Torque ripple reduction control of brushless DC motor drive systems with extended switching schemes
Hall-sensor-controlled brushless DC (BLDC) motors are extensively utilized in many applications due to their simple manufacturing and straightforward control. The conventional commutation methods use the 120º and 180º commutation logics. The 120º commutation directly derives from the Hall signals …
-
A Magnetic Flux Leakage NDE System for CANDU Feeder Pipes
… incorporates feedback from a wire coil and a Hall sensor (FCV2), and a magnetic anisotropy prototype (MAP) probe. The combination of FCV2 and the MAP probe was shown to provide SMA measurements on feeder pipe samples and predict stresses from SMA measurements with a mean accuracy of ±38MPa.
-
Electromagnetic methods for measuring material properties of cylindrical rods and array probes for rapid flaw inspection
… magnetic field sensing elements. A preliminary Hall array probe has been built and test with eight individual Hall sensor ICs and a racetrack coil. Electronic hardware is developed to interface the probes to an oscilloscope or an eddy current instrument. To achieve high spatial resolution and to …
-
SPINTRONIC DEVICES BASED ON SPIN HALL AND ANOMALOUS HALL EFFECT
… that utilizes spin orbit torque and harmonic Hall resistances in an Co20Fe60B20/Ta bilayer with superparamagnetic behaviors. The L-shaped Hall device enables simultaneous measurement of the magnitude and direction of the magnetic field. Subsequently, we demonstrate a Hall sensor based on …
-
Variable gain control of brushless DC motor control with low resolution sensors
… feasibility of using low cost, low resolution sensor for high performance brushless dc (BLDC) motor speed control is investigated. Conventional control, using a tachometer or high resolution encoder, suffers from drawbacks such as high cost, large physical volume, and high sensor processing …
-
Dual Modal Optical and Acoustic Communication and Ranging (Pair) Device Based on Water Immersible Micro Scanning Mirrors (WIMSM)
To address the communication and ranging challenges caused by underwater environment, dual modal oPtical and Acoustic communIcation and Ranging (PAIR) devices are investigated. The dual-modal design builds upon a co-axial ultrasonic and collimated laser beams, which leverage different signal …
-
High Bandwidth Hybrid Current Sensor Readout Interface for Power Applications
… small size, non-invasive, high bandwidth current sensors with noise immunity, accuracy, and linearity are required. Various hybrid sensors have been reported to meet the requirements of emerging power circuits. A combination of a magneto resistor or Hall sensor and a coil is used to cover a wide …
-
Studies of magnetoresistance and hall sensors in semiconductors
… Magnetoresistance (EMR) and a Vertical Mesa Hall Sensor (VMHS) are studied.</p> <p>EMR devices have been fabricated from a 2DEG InAs/GaSb structures which exhibit a low carrier density and high mobility that achieve the best performance. The general electrical magneto-transport properties are …
-
Interactions of Two-Dimensionally Confined Electrons with an Adjacent Magnetic Monopole
… thesis I ask: can they be detected using the Hall effect? With the electrons bound to a plane permeated by the non-uniform magnetic field produced by a magnetic monopole; what will the Hall voltage look like across the plane, and can it be measured? Magnetohydrodynamics is utilised to model …
-
Measuring Effluent Flow in a Biogas Digester: A Practical and Affordable Tipping Bucket Design
… would benefit from using a higher-resolution Hall sensor for more precise measurements. Future research should focus on improving the experimental setup, validating the calibration formula, and assessing the system's long-term durability under real-world biogas digester conditions. This …
Page 1 of 3