Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Hard Breakdown"”.

  1. Degradation and Breakdown of Ultrathin Gate Oxide

    … oxides, a new type of failure mode, soft breakdown, has been observed. The characteristics of this kind of failure are often identified by a large increase of gate signal noise level. It has been proposed that there is a threshold power that divides soft and hard breakdown. In this thesis, …

    uiuc Repository record for Degradation and Breakdown of Ultrathin Gate Oxide (opens in a new tab)

  2. Interface engineering and reliability characteristics of HfO₂ with poly Si gate and dual metal (Ru-Ta alloy, Ru) gate electrode for beyond 65nm technology

    … gate electrode as well as interface engineering. Hard breakdown and soft breakdown were compared and Weibull slope of soft breakdown was smaller than that of hard breakdown, which led to a potential high-k scaling issue. Dynamic reliability has been studied and the combination of trapping and …

    texas Repository record for Interface engineering and reliability characteristics of HfO₂ with poly Si gate and dual metal (Ru-Ta alloy, Ru) gate electrode for beyond 65nm technology (opens in a new tab)

  3. GATE DIELECTRIC BREAKDOWN PHYSICAL ANALYSIS AND STUDIES -2D MODELING OF BREAKDOWN THERMAL EFFECT

    … oxide is indeed important to understand the soft breakdown (SBD) and hard breakdown (HBD) mechanisms of a narrow channel MOSFET. During HBD or under favorable condition of SBD, silicon epitaxy growth is observed at the cathode side of the MOSFET. This epitaxy growth is named dielectric …

    nus Repository record for GATE DIELECTRIC BREAKDOWN PHYSICAL ANALYSIS AND STUDIES -2D MODELING OF BREAKDOWN THERMAL EFFECT (opens in a new tab) Download file for GATE DIELECTRIC BREAKDOWN PHYSICAL ANALYSIS AND STUDIES -2D MODELING OF BREAKDOWN THERMAL EFFECT (opens in a new tab)

  4. Circuit Design And Reliability Of A Cmos Receiver

    … which are gaining more and more attention. Breakdown (BD) and hot carrier (HC) effects are important issues in semiconductor industry. Soft-breakdown (SBD) and HC effects on device and RF performance has been reported. Hard-breakdown (HBD) effects on digital circuits have also been …

    ucf Repository record for Circuit Design And Reliability Of A Cmos Receiver (opens in a new tab)

  5. 12nm Finfet aging characterization through wear-out sensor design

    … (EM), and time dependent dielectric breakdown (TDDB). Then, a survey on state-of-the-art wear-out mitigation techniques reveals that developing aging mechanisms sensors aids academia and industry alike by serving as tools for model characterization and monitors for dynamic on-silicon …

    ubc Repository record for 12nm Finfet aging characterization through wear-out sensor design (opens in a new tab) Download PDF for 12nm Finfet aging characterization through wear-out sensor design (opens in a new tab)

  6. EXPERIMENTAL STUDY OF BIAS TEMPERATURE INSTABILITY AND PROGRESSIVE BREAKDOWN OF ADVANCED GATE DIELECTRICS

    … tunneling mechanisms behind the gate dielectrics breakdown shift. Consequently, gate dielectrics breakdown mode also shifts from the clear-detected hard breakdown to the noisy soft breakdown. Thus new lifetime extrapolation models are needed. The progressive breakdown of ultrathin SiO2 is studied …

    maryland Repository record for EXPERIMENTAL STUDY OF BIAS TEMPERATURE INSTABILITY AND PROGRESSIVE BREAKDOWN OF ADVANCED GATE DIELECTRICS (opens in a new tab)

  7. Point-contacting by Localised Dielectric Breakdown: self-aligned metallisation for a solar cell rear surface

    … which contains a single doped point contact. Hard breakdown of the dielectric occurs over the doped region leading to stable low resistance ohmic contact. This work focuses on the potential for this method to be used in a rear point contact design similar to the PERL cell. A detailed …

    unsw Repository record for Point-contacting by Localised Dielectric Breakdown: self-aligned metallisation for a solar cell rear surface (opens in a new tab)

  8. An improved ferroelectric H f₀.₅Zr₀.₅O₂ via La₂O₃ doping and interface engineering

    … leads to defect generation and, subsequently, hard-breakdown of the material. The defect generation with field cycling is evident from the leakage current increase. Prior to the discovery of ferroelectricity, HfO2 was used for high-k applications, where it was experimentally proven that doping …

    qucosa-diss

  9. Study Of Gate Oxide Breakdown And Hot Electron Effect On Cmos Circuit Performances

    … are hot carrier effects (HCs) and gate oxide breakdown (BD) effects. These issues are recently more important to industry, due to the small size and high lateral field in short-channel of the device will cause high electrical field and other reliability issues. This dissertation primarily …

    ucf Repository record for Study Of Gate Oxide Breakdown And Hot Electron Effect On Cmos Circuit Performances (opens in a new tab)

  10. TiN/HfO2/SiO2/Si gate stacks reliability : Contribution of HfO2 and interfacial SiO2 layer

    … needs to be investigated. To understand the breakdown mechanism of high-[kappa]/SiO_2 gate stack completely, it is important to study this multi-layer structure extensively. For example, (i) the role of SiO_2 interfacial layers and bulk high-[kappa] gate dielectrics without any interfacial …

    njit Repository record for TiN/HfO2/SiO2/Si gate stacks reliability : Contribution of HfO2 and interfacial SiO2 layer (opens in a new tab)

  11. Bimodal Gate Oxide Breakdown in Sub-100 nm CMOS Technology

    … being explored. However, the phenomena of oxide breakdown and reliability are still serious issues in these thin oxides. Oxide breakdown exhibits a soft breakdown behavior at low voltages, and this is posing as one of the most crucial reliability issues for scaling of the ultra-thin oxides. In …

    waterloo Repository record for Bimodal Gate Oxide Breakdown in Sub-100 nm CMOS Technology (opens in a new tab)

  12. Reliability Studies of TiN/Hf-Silicate Based Gate Stacks

    … quickly reach saturation. Time-zero dielectric breakdown (TZBD) characteristics of TiN/HfO_2 based gate stacks show that thickness and growth conditions significantly affect the BD field of IL. For the thin high-w layers, BD of IL triggers BD of the gate stack. Otherwise, BD of high-w layer …

    njit Repository record for Reliability Studies of TiN/Hf-Silicate Based Gate Stacks (opens in a new tab)

  13. Characterization of high-k layers as the gate dielectric for MOSFETs

    … electron traps and the time dependent dielectric breakdown (TDDB). Amplitude charge pumping and frequency sweep charge pumping are used to investigate the impact of gate electrodes and channel length on charging and discharging of the bulk defects. As channel length increases,it is found that bulk …

    liverpool-jm Repository record for Characterization of high-k layers as the gate dielectric for MOSFETs (opens in a new tab) Download PDF for Characterization of high-k layers as the gate dielectric for MOSFETs (opens in a new tab)