Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Hard turning"”.

  1. The Prediction of Chatter Stability in Hard Turning

    … from industry, a realistic chatter modeling for hard turning has not been available due to the complexity of the problem, which is mainly caused by flank wear and nonlinearity in hard turning. This thesis attempts to develop chatter models for predicting chatter stability conditions in hard …

    gatech Repository record for The Prediction of Chatter Stability in Hard Turning (opens in a new tab)

  2. Impact of hard-turning parameters on the surface integrity of hybrid 60 steel

    … thesis investigates the surface integrity of hard-turned Hybrid 60, focusing on the effects of machining parameters on the material's microstructure and mechanical properties. Seven samples were machined: samples A, B, C, and D with varying cutting speeds and feed rates, and samples E1, E2, …

    chalmers Repository record for Impact of hard-turning parameters on the surface integrity of hybrid 60 steel (opens in a new tab)

  3. Process Optimization for Machining of Hardened Steels

    Finish machining of hardened steel is receiving increasing attention as an alternative to the grinding process, because it offers comparable part finish, lower production cost, shorter cycle time, fewer process steps, higher flexibility and the elimination of environmentally hazardous cutting …

    gatech Repository record for Process Optimization for Machining of Hardened Steels (opens in a new tab)

  4. Self-propelled rotary tool for turning difficult-to-cut materials

    Hard turning of difficult-to-cut materials is an economical method of machining components with high surface quality and mechanical performance. Conventionally in the machining industry, generating a component from raw goods includes a casting or forging process, rough machining, heat treatment to …

    uoit Repository record for Self-propelled rotary tool for turning difficult-to-cut materials (opens in a new tab)

  5. Chip Formation and Surface Integrity in High Speed Machining of Hardened Steel

    … the potential for the industrial application of hard turning technology during the past few years. Machining instead of grinding hardened steel components reduces the machining sequence, the machining time, and the specific cutting energy. Hard turning is characterized by the generation of high …

    mcmaster Repository record for Chip Formation and Surface Integrity in High Speed Machining of Hardened Steel (opens in a new tab)

  6. Detecting White Layer in Hard Turned Components Using Non-Destructive Methods

    Hard turning is a machining process where a single point cutting tool removes material harder than 45 HRC from a rotating workpiece. Due to the advent of polycrystalline cubic boron nitride (PCBN) cutting tools and improved machine tool designs, hard turning is an attractive alternative to grinding …

    gatech Repository record for Detecting White Layer in Hard Turned Components Using Non-Destructive Methods (opens in a new tab)

  7. Laser-based hybrid process for machining hardened steels

    Cost-effective machining of hardened steel (>60 HRC) components such as a large wind turbine bearing poses a significant challenge. This thesis investigates a new laser tempering based hybrid turning approach to machine hardened AISI 52100 steel parts more efficiently and cost effectively. The …

    gatech Repository record for Laser-based hybrid process for machining hardened steels (opens in a new tab)

  8. Workholding Optimization for Turning of Ring Shaped Parts

    … to produce precision ring shaped parts using the turning process depends significantly on the workholding characteristics. Workholding parameters such as the number of jaws and chucking force are known to influence the roundness tolerance of ring shaped parts commonly used in bearing applications. …

    gatech Repository record for Workholding Optimization for Turning of Ring Shaped Parts (opens in a new tab)

  9. Estudo do desempenho de nanolubrificantes no torneamento do aço-ferramenta AISI D6 temperado e revenido

    … (CuO, aC:H and CuO + aC: H), applied to the hard turning of quenched and tempered AISI D6 tool steel using MQL technique. Thus, turning tests at constant cutting parameters (vc = 100 m/min, ap = 0.3 mm and f = 0.1 mm/rot.) with solid PCBN cutting tools were performed. For comparison, turning …

    brazil-ufrn Repository record for Estudo do desempenho de nanolubrificantes no torneamento do aço-ferramenta AISI D6 temperado e revenido (opens in a new tab)

  10. Machining of a high-alloy tool steel produced by electron beam powder bed fusion

    … study the machinability in terms of grinding and turning. The hardness of the printed and heat-treated specimens was about 68 HRC. After the printing, the specimens were subjected to post-treatment including a combined hot-isostatic-press and heat treatment. Initial material characterization …

    chalmers Repository record for Machining of a high-alloy tool steel produced by electron beam powder bed fusion (opens in a new tab)

  11. Efeitos do material de ferramenta e das técnicas de lubrirrefrigeração na vida da ferramenta e na superfície usinada por fresamento do ferro fundido branco alto cromo

    … of PCBN (Polycrystalline Cubic Boron Nitride) in hard turning due to high wear rates and temperatures on the cutting edges. However, in milling, conditions involve interrupted cutting and the cutting fluids may easily access the cutting region. In the latter case, the coated cemented carbides …

    brazil-ufrn Repository record for Efeitos do material de ferramenta e das técnicas de lubrirrefrigeração na vida da ferramenta e na superfície usinada por fresamento do ferro fundido branco alto cromo (opens in a new tab)

  12. Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel

    … nitride (CBN) tools are most commonly used in hard turning and cast-iron machining at high cutting speeds. There are a limited number of studies regarding low-carbon-steel machining with CBN under a high-speed and with a dry machining condition. In this study, the investigation shows the …

    mcmaster Repository record for Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel (opens in a new tab)

  13. ARCHITECTURE OPTIMIZATION, TRAINING CONVERGENCE AND NETWORK ESTIMATION ROBUSTNESS OF A FULLY CONNECTED RECURRENT NEURAL NETWORK

    … dynamical system and a tool wear progression in hard turning, are carried out to testify the development in this dissertation. The work detailed in this dissertation focuses on the creation of: (1) a new method to prove/guarantee the training convergence of RNN, and (2) a new method to quantify …

    clemson Repository record for ARCHITECTURE OPTIMIZATION, TRAINING CONVERGENCE AND NETWORK ESTIMATION ROBUSTNESS OF A FULLY CONNECTED RECURRENT NEURAL NETWORK (opens in a new tab)

Page 1 of 2