Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Hardboard"”.

  1. Failure Prediction of Adhesively Bonded Hardboard Doorskin Joints

    Wood and wood based composites such as hardboard have become very common materials for use in non-structural applications, which include pre-finished paneling, siding, exterior trim, furniture, and door skins. This thesis describes the results of a study of the failure of hardboard door skins. …

    vt Repository record for Failure Prediction of Adhesively Bonded Hardboard Doorskin Joints (opens in a new tab)

  2. Static and dynamic modulus of elasticity of hardboard

    Thesis (M.S.)--Michigan State University. Department of Forest Products, 1964

    msu Repository record for Static and dynamic modulus of elasticity of hardboard (opens in a new tab)

  3. Some aspects of the viscoelastic behavior of hardboard

    Thesis (Ph. D.)--Michigan State University. Department of Forest Products, 1964

    msu Repository record for Some aspects of the viscoelastic behavior of hardboard (opens in a new tab)

  4. Decay resistance of slurry erominated wet-process high-density hardboard

    … of slurry brominated wet-process high-density hardboard. The advantage of resistance against decay will increase the marginal economics of the brominated board which was developed initially as a fire-resistant materials only. Non-brominated and brominated hardboards were examined, using a …

    ubc Repository record for Decay resistance of slurry erominated wet-process high-density hardboard (opens in a new tab) Download PDF for Decay resistance of slurry erominated wet-process high-density hardboard (opens in a new tab)

  5. The influence of fibre chemical constitutents in oil-tempering of hardboard.

    … of tempering oil applied to wet-batch process hardboards. Thin (0.05 cm.thickness) experimental boards were prepared with good formation properties and reproducibility for the study. Results of oil-tempering, heat-treatment and humidification treatments were compared with and without modifying …

    ubc Repository record for The influence of fibre chemical constitutents in oil-tempering of hardboard. (opens in a new tab) Download PDF for The influence of fibre chemical constitutents in oil-tempering of hardboard. (opens in a new tab)

  6. Ethanol Production from Hardboard Manufacturing Process Wastewater: Methods for Improving Product Yields from Hemicellulose Hydrolysates

    … inhibitory hydrolysate still remains. Hardboard manufacturing process wastewater (HPW) was evaluated at a potential feedstream for lignocellulosic ethanol production by native xylose-fermenting yeast. After screening of xylose-fermenting yeasts, Scheffersomyces stipitis CBS 6054 was …

    mtu Repository record for Ethanol Production from Hardboard Manufacturing Process Wastewater: Methods for Improving Product Yields from Hemicellulose Hydrolysates (opens in a new tab)

  7. Feasibility study of enhancing natural-adhesives through chemical modification

    … the mechanical properties of the plywood and hardboard by using soy protein resin, it is necessary to add another adhesive as a copolymer in soy protein resin. The problem of this study was to determine the feasibility of adding methylene diphenyl diisocyanate (MDI) in order to enhance the …

    iastate Repository record for Feasibility study of enhancing natural-adhesives through chemical modification (opens in a new tab)

  8. Flexural behavior of a glass fiber reinforced wood fiber composite

    … of elasticity (MOE) of glass fiber reinforced hardboard could be successfully predicted from the static flexural MOE of the wood fiber matrix, and the tensile MOE and effective volume fraction of the glass fiber reinforcement. Under the same assumption, the composite modulus of rupture (MOR) is …

    vt Repository record for Flexural behavior of a glass fiber reinforced wood fiber composite (opens in a new tab)

  9. Monotonic and Cyclic Performance of Light-Frame Shear Walls with Various Sheathing Materials

    … investigated are oriented strandboard (OSB), hardboard, fiberboard, and gypsum wallboard. The objectives of this study were to (1) obtain and compare performance characteristics of each sheathing material; (2) compare the effects of monotonic loading versus the cyclic loading response; (3) …

    vt Repository record for Monotonic and Cyclic Performance of Light-Frame Shear Walls with Various Sheathing Materials (opens in a new tab)

  10. CHARACTERIZING AND IMPROVING PRODUCTION OF FERMENTABLE SUGARS AND CO-PRODUCTS FROM A FOREST PRODUCT INDUSTRY WASTEWATER STREAM

    Hardboard processing wastewater was evaluated as a feedstock in a bio refinery co-located with the hardboard facility for the production of fuel grade ethanol. A thorough characterization was conducted on the wastewater and the composition changes of which during the process in the bio refinery …

    mtu Repository record for CHARACTERIZING AND IMPROVING PRODUCTION OF FERMENTABLE SUGARS AND CO-PRODUCTS FROM A FOREST PRODUCT INDUSTRY WASTEWATER STREAM (opens in a new tab)

  11. The competitive position of wood products in the residential siding market

    … that non-wood materials pose to solid wood, hardboard, and plywood sidings. Respondents rated seven siding materials on eleven attributes. Perceptual maps were constructed using multiple discriminant analysis, and preferences were used to locate ideal points. Negative perceptions of all wood …

    vt Repository record for The competitive position of wood products in the residential siding market (opens in a new tab)

  12. Integrated bioprocessing concept : hemp hurd valorization by co-production of lignified nanomaterials, lactic acid and binderless fiberboards

    … material properties and compared to ANSI Basic Hardboard standards. The hydrolysate left over after nanomaterial production is combined with filtrate from the binderless board grinding process and a fermentation is conducted with Lactiplantibacillus plantarum to study productivity of lactic acid …

    ubc Repository record for Integrated bioprocessing concept : hemp hurd valorization by co-production of lignified nanomaterials, lactic acid and binderless fiberboards (opens in a new tab) Download PDF for Integrated bioprocessing concept : hemp hurd valorization by co-production of lignified nanomaterials, lactic acid and binderless fiberboards (opens in a new tab)

  13. An analysis of transient heat flow through a composite wall

    … of a fir frame, covered on one side with hardboard and on the other with cedar, and the space between the hardboard and cedar was filled with fibreglass insulation. A vapour barrier was not included as it would offer little resistance to heat flow. This structure, therefore, offered …

    ubc Repository record for An analysis of transient heat flow through a composite wall (opens in a new tab) Download PDF for An analysis of transient heat flow through a composite wall (opens in a new tab)

  14. An analysis of hardwood lumber and other wood-based materials use in the wood furniture industry

    … in particleboard and MDF use, and an increase in hardboard and OSB/softwood plywood use from 1990 to 1992. Product consistency was the attribute which most influenced the purchase of hardwood lumber, followed by accurate grading, supplier's knowledge of lumber, correct orders, and shipping on …

    vt Repository record for An analysis of hardwood lumber and other wood-based materials use in the wood furniture industry (opens in a new tab)

  15. Technical review and economic evaluation: steam- explosion/fractionation of biomass

    … for use as enzyme! acid hydrolysis feedstock, hardboard production, or as unbleached pulp, 2) water extracted steam-exploded wood for recovery of pentosan polysaccharides and a lignocellulosic fiber, and 3) water and aqueous solvent (alkali or ethanol) extracted steam -exploded wood for …

    vt Repository record for Technical review and economic evaluation: steam- explosion/fractionation of biomass (opens in a new tab)

  16. Curing of drying oil in wood fibre webs by gamma-irradiation

    … prolonged thermal treatment hitherto used by the hardboard industry. Added advantages of irradiation processed copolymerized papers are less discoloration, especially with high lignin content pulps, and lower elastic modulus, a factor clearly objectionable for some paper uses.

    ubc Repository record for Curing of drying oil in wood fibre webs by gamma-irradiation (opens in a new tab) Download PDF for Curing of drying oil in wood fibre webs by gamma-irradiation (opens in a new tab)

Page 1 of 2