Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 72 for “"Hardenability"”.

  1. Bake hardenability of microalloyed ULC steels

    Includes bibliographical references (pages 242-249).

    colo-mines Repository record for Bake hardenability of microalloyed ULC steels (opens in a new tab)

  2. Hardenability, transformation and precipitation effects in vanadium steels.

    … with other microalloying additions on the hardenability of steels. Positive and negative synergistic effects have been observed, but studies into the mechanisms have been limited. To investigate the effects, vanadium interactions with aluminium, molybdenum, niobium and titanium were studied …

    sheffield-hallam Download PDF for Hardenability, transformation and precipitation effects in vanadium steels. (opens in a new tab)

  3. Computer-Aided Estimation of Steel Hardenability On the Basis of Alloy-Chemical Composition

    <p>A numerical Solution to the one dimensional unsteady state heat transfer problem including the latent heat evolution of the pearlite reaction has been developed to predict thermal conditions in a Jominy bar. This has been combined with a model for pearlite nucleation and growth developed by …

    mcmaster Repository record for Computer-Aided Estimation of Steel Hardenability On the Basis of Alloy-Chemical Composition (opens in a new tab)

  4. Effects of copper on the metallurgical, mechanical, and fracture properties of 0.90 carbon rail steels, The

    … pearlitic interlamellar spacing, microstructure, hardenability, hardness profile, tensile and yield strength, Charpy U-notch impact toughness, K1c fracture toughness, and fatigue crack growth rate according to standard ASTM testing methodologies. The austenitic grain size, as determined by the …

    colo-mines Repository record for Effects of copper on the metallurgical, mechanical, and fracture properties of 0.90 carbon rail steels, The (opens in a new tab)

  5. An Experimental Investigation of the Hardenabilities Tensile and Fracture Properties of Powdered Metal Steels

    … a significant fraction of martensite relies on hardenability calculations developed for wrought steels. These proven tools are built upon assumptions for wrought steels that do not hold true for PM steels. One assumption is that the alloying elements are homogenized throughout the material. In …

    mcmaster Repository record for An Experimental Investigation of the Hardenabilities Tensile and Fracture Properties of Powdered Metal Steels (opens in a new tab)

  6. The Effect of Cobalt on the Structure and Properties of No. 5 Die Steel

    … additions by modified dilatometric methods. Hardenability and T.T.T. diagrams were also determined in order to compare the effect of cobalt on these properties. An attempt was made, by using electron probe microanalyser, to find evidence of partitioning of cobalt at the ferrite-austenite and …

    aston Download PDF for The Effect of Cobalt on the Structure and Properties of No. 5 Die Steel (opens in a new tab)

  7. Carbo-nitride precipitation and its effect on matrix transformations in high strength-high toughness 300M steel

    … volume fraction of fine particles increased the hardenability of the steel, resulting in an increased percentage of upper bainite, that led to a lower temper response compared to 925 austenitisation temperature. The improved K1C value was attributed to increased dissolution of fine particles due …

    birmingham Download PDF for Carbo-nitride precipitation and its effect on matrix transformations in high strength-high toughness 300M steel (opens in a new tab)

  8. Tempering response of mixed martensitic/bainitic microstructures in quench and tempered plate steels

    … vanadium (V), chromium (Cr) and silicon (Si). Hardenability characterization was conducted through Jominy end quench testing and construction of continuous cooling transformation (CCT) diagrams. Increased alloying additions, in particular Mo and Cr, improved hardenability and hence increased …

    colo-mines Repository record for Tempering response of mixed martensitic/bainitic microstructures in quench and tempered plate steels (opens in a new tab)

  9. The Economic Utilisation of Steels in Engineering Industry

    … as summarised for a given grade by a Jominy hardenability band. The flexibility of the method in meeting design requirements realistically is shown, although continuing to specify in terms of established strength criteria. For cost effectiveness in selection full exploitation of hardenability …

    aston Download PDF for The Economic Utilisation of Steels in Engineering Industry (opens in a new tab)

  10. High resolution secondary ion mass spectrometry analysis of boron in high strength steels and polycrystalline superalloys

    … is added to high strength steels to increase hardenability and as grain strengthener in polycrystalline superalloys, but is difficult to study by many conventional techniques. The main aim of this study was to explore the application of high resolution secondary ion mass spectrometry …

    oxford Repository record for High resolution secondary ion mass spectrometry analysis of boron in high strength steels and polycrystalline superalloys (opens in a new tab)

  11. The effects of ternary alloying additions on solute-drag creep in Al-Mg alloys

    … in the Al-xMg-5Zn and Al-3Mg-xFe materials. Age hardenability during natu ral aging and simulated paint-bake cycle are studied for the Al-xMg-5Zn and Al-3Mg-xCu materials. Zn creates a significant paint-bake response, while the effect of Cu is small for a simulated paint-bake cycle.

    texas Repository record for The effects of ternary alloying additions on solute-drag creep in Al-Mg alloys (opens in a new tab) Restricted access

  12. The fracture characteristics of a boron containing high strength low alloy steel

    … than HY 100 due to a lower nickel content. Thehardenability is maintained by the boron addition. The preliminary testing of RQT 701 showed a variation inthe impact transition temperature through the thickness ofthe plate. This study examines the possible causes of thisvariation in impact …

    salford

Page 1 of 4