Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1195 for “"Hardened"”.
-
Radiation-Hardened Frequency Synthesizer Design
… The second work presents A 15-22GHz radiation-hardened PLL designed in a 22nm FinFET process with hardening techniques for single event upset (SEU) and total ionizing dose (TID) implemented in all key PLL blocks. The PLL achieves a FoM of -240.89dB at 15GHz with -64dBc spur levels. Moreover, …
-
Induction tempering of induction hardened shafts
… embrittlement regime. Tempering of induction hardened shafts is a process that is well suited for rapid induction tempering. The goal of the present work is to gain a better understanding of the microstructural evolution, toughness and fatigue behavior of a 1045 steel, specifically within the …
-
RADIATION-HARDENED MICROELECTRONICS WORKFORCE DEVELOPMENT GUIDELINE
… (TC) in its nuclear defense: radiation-hardened (RH) microelectronics. The objective of the research is to develop a training plan/guideline for current and future workforce in the field of radiation-hardened microelectronics in order to provide them with the knowledge and skills needed …
-
Low-power and Radiation Hardened TSPC Registers
… designs are crucial. Traditional Radiation Hardened By Design (RHBD) techniques have some trade-offs between area, speed, power, and energy consumption. Thus, new designs are required to reduce these penalties. This research proposes two high-performance, low-power, low-energy, and low-area …
-
The Fatique Resistance of Surface Hardened Steels
… and nitrocarburised O80M15 and induction hardened 080A47 were tested in three point bending fatigue. The number of cycles to produce a detectable fatigue crack, N., correlated well with the effective stress intensity factor range. The microstructural feature in case hardened steel was the …
-
Polypropylene fibre reinforcement of hardened cement paste
… characteristics ofpolypropylene fibre reinforced hardened cement paste having heterogeneousfibre geometries and a range of volume concentrations.Polypropylene fibres were prepared under various manufacturingconditions using a laboratory extruder, to ascertain the effect ofthese conditions on fibre …
-
Process Optimization for Machining of Hardened Steels
Finish machining of hardened steel is receiving increasing attention as an alternative to the grinding process, because it offers comparable part finish, lower production cost, shorter cycle time, fewer process steps, higher flexibility and the elimination of environmentally hazardous cutting …
-
Cost-effective radiation hardened techniques for microprocessor pipelines
The aggressive scaling of semiconductor devices has caused a significant increase in the soft error rate induced by radiation particle strikes. This has led to an increasing need for soft error tolerance techniques to maintain system reliability, even for sea-level commodity computer products. …
-
Automated determination of air content in hardened concrete
… of air content and the related parameters in hardened concrete using the principles of Image Analysis and Computer Technology. Slices taken from the concrete specimen were viewed through a microscope with 40X magnification. The magnified image of the concrete slice is digitized by an Image …
-
Security hardened remote terminal units for SCADA networks.
… RTU protection enforcement and create a security hardened RTU capable of supporting the new RTU access control model. The first approach is to reduce a commercial OS kernel to only those components needed by the RTU, removing any known or unknown vulnerabilities contained in the eliminated code …
-
Laser-based hybrid process for machining hardened steels
Cost-effective machining of hardened steel (>60 HRC) components such as a large wind turbine bearing poses a significant challenge. This thesis investigates a new laser tempering based hybrid turning approach to machine hardened AISI 52100 steel parts more efficiently and cost effectively. The …
-
Transistor level automatic generation of radiation-hardened circuits
Tecnologias submicrônicas (DSM) têm inserido novos desafios ao projeto de circuitos devido a redução de geometrias, redução na tensão de alimentação, aumento da freqüência e aumento da densidade de lógica. Estas características reduzem significativamente a confiabilidade dos circuitos integrados …
-
Cyclic Deformation and Fatigue Behavior of Hardened Steels
Made available in DSpace on 2014-12-10T17:25:50Z (GMT). No. of bitstreams: 1 6915342.pdf: 3082155 bytes, checksum: b047ae8e380904f3539fc617579f48bc (MD5) Previous issue date: 1969
-
Developing An Alternative Hardened Concrete Air Void Characterization Method
… an alternative characterization method for the hardened air void system in concrete. This study uses ASTM C457, “Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete” as a baseline characterization method and attempts to thoroughly reduce …
-
Pore structure and diffusional properties of hardened cement pastes
… fuel ash (PFA) and blast furnace slag (BFS) into hardened cement pastes (HCP) in retarding the ingress of chloride ions and oxygen molecules from the external environment. The influence of environmental factors such as drying and carbonation on the pore structure and diffusional properties of OPC, …
-
Mechanical Characteristics of Fresh and Hardened Gluminous Cement Pastes
… of conversion on the pore structure of the hardened high alumina cement (HAC) pastes was monitored using a mercury intrusion porosimeter. A scanning electron microscope / KEVEX energy dispersive X-ray analysis combination, and in some instances a differential thermal analyser, were used to …
-
Hygrothermal Effects on Viscoelastic Properties of Amine-Hardened Epoxy
In this work the behaviour of a DGEBA/TETA epoxy resin system, a candidate resin for electrically conductive nanocomposites, has been characterized after exposure to hygrothermal conditions for up to 2400 hours. The objectives of the study were to determine the diffusion coefficient, the …
Page 1 of 60