Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Hardness Profiles"”.

  1. Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data

    Welding occupies an important place as a major metal fabricating process and steel is the backbone of many an industry. Therefore it is of paramount importance to know the effect of welding on steel.

    byu Repository record for Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data (opens in a new tab) Download PDF for Correlation of Weldment Hardness Profiles in Steels with Jominy End-Quench Data (opens in a new tab)

  2. Effects of Inter-Layer Dwell Parameters on Hardness Profiles in Thin Wall Mild Steel WAAM

    … temperature from 500 °C to 150 °C. Rockwell B Hardness tests were then taken on all wall samples, and geometry was measured. This allowed for direct comparison between the two dwell methods and the relationship between interlayer dwell parameter and resultant hardness, geometry, and total …

    gatech Repository record for Effects of Inter-Layer Dwell Parameters on Hardness Profiles in Thin Wall Mild Steel WAAM (opens in a new tab)

  3. DEVELOPMENT OF PRECIPITATION HARDENABLE AL-SC-ZR-HF QUATERNARY ALLOYS THROUGH THERMODYNAMIC MODELING, AND ROOM-TEMPERATURE AND ELEVATED TEMPERATURE HARDNESS

    … compositions showed a secondary room-temperature hardness peak up to 700 MPa at 450°C. Elevated temperature hardness profiles also indicated an increase in hardness from 200-300°C, attributed to the precipitation of Al3Sc, however, no secondary hardness response was observed from the Al3Zr or …

    mtu Repository record for DEVELOPMENT OF PRECIPITATION HARDENABLE AL-SC-ZR-HF QUATERNARY ALLOYS THROUGH THERMODYNAMIC MODELING, AND ROOM-TEMPERATURE AND ELEVATED TEMPERATURE HARDNESS (opens in a new tab)

  4. Laser welding of high carbon steels

    … laser parameters was quantified by measuring the hardness profiles, tensile strength, weld width, weld penetration and the rare of weld volume formation. Furthermore, microscopic examination was conducted at the welded joint. The quality of the welds was improved by increasing the pulse width and …

    glasgow Download PDF for Laser welding of high carbon steels (opens in a new tab)

  5. Characterization of preheated and non-preheated HY-80 steel weldments by transmission electron microscopy

    … of hull structures. The microstructures and hardness profiles of both a preheated (250 F--121 C) and a non-preheated (32 F--0 C) HY-80 steel weldment were studied to provide information and allow comparisons of the microstructural transformations that occur in the heat affected zone during …

    nps Repository record for Characterization of preheated and non-preheated HY-80 steel weldments by transmission electron microscopy (opens in a new tab)

  6. Machinability of bainitic steels

    … non-metallic inclusion population and hardness profiles, after which face turning tests were conducted for both materials under identical cutting conditions. The forces were measured during the cutting process with the use of a dynamometer, while the tool wear response was characterized …

    chalmers Repository record for Machinability of bainitic steels (opens in a new tab)

  7. Using Near-Infrared Photography to Better Study Snow Microstructure and Its Variability Over Time and Space

    … Snow Fork wetness, and Snow Micro-Penetrometer hardness profiles. NIR photography was also deployed in five pits along a 10.6 km transect in Grand Mesa, CO, to track stratigraphy variations in space. The NIR flash was found to improve contrast and lower noise for layer detection using automated …

    boise Repository record for Using Near-Infrared Photography to Better Study Snow Microstructure and Its Variability Over Time and Space (opens in a new tab)

  8. Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds

    … were evaluated through static tensile tests and hardness testing on cooled samples. Using this data, an assessment was performed to investigate the relationship between hardness and mechanical properties. For the alloys evaluated, empirical relationships were found between Vickers hardness and …

    vt Repository record for Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds (opens in a new tab)

  9. Assessment of depth of case-hardening in steel rods by electromagnetic methods

    … above-mentioned electromagnetic measurements, hardness profiles were obtained by microhardness measurements.</p> <p>It seems that measurements of initial permeability on surface hardened rods do not give a clear indication of case depth. Differential permeability was plotted versus applied …

    iastate Repository record for Assessment of depth of case-hardening in steel rods by electromagnetic methods (opens in a new tab)

  10. Sliding wear of nitrided steels

    … was completely worn away. It is suggested that hardness has a crucial role in determining the wear rate through nitrided diffusion layers. A thick and porous compound layer produced by gas nitriding showed a poor wear behaviour owing to its brittleness, while a thin nitrocarburized E-Fe3N …

    brunel Repository record for Sliding wear of nitrided steels (opens in a new tab)

  11. Investigation and characterization of size effects in microforming processes

    … of the deformation was characterized by micohardness evaluations. In addition for microextrusion, X-Ray pole figure analyses and microstructure analyses were also performed.For both processes, the deformation distribution through the cross sections of the fine grained specimens is not …

    unh-thes Repository record for Investigation and characterization of size effects in microforming processes (opens in a new tab)

  12. Induction hardening response of a carburized 4121 steel

    … analysis of the fatigue specimens, radial hardness profiles, carbon gradient analysis, torsional fatigue testing, and residual stress vs depth measurements. Finally, a fracture study was conducted to elucidate differences in fracture behavior and/or fracture toughness between the …

    colo-mines Repository record for Induction hardening response of a carburized 4121 steel (opens in a new tab)

  13. Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations

    … methodologies. Mapping scratch and vertical hardness profiles along the reaction depth revealed that the rate of change in this ratio serves as a key indicator of whether the material exhibits compressive ductility or brittle fracture. Multispectral image analysis from EDS elemental maps, …

    tamu Repository record for Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations (opens in a new tab) Embargoed until 2027-08-01

  14. Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations

    … methodologies. Mapping scratch and vertical hardness profiles along the reaction depth revealed that the rate of change in this ratio serves as a key indicator of whether the material exhibits compressive ductility or brittle fracture. Multispectral image analysis from EDS elemental maps, …

    tamu Repository record for Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations (opens in a new tab) Embargoed until 2027-08-01

  15. Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations

    … methodologies. Mapping scratch and vertical hardness profiles along the reaction depth revealed that the rate of change in this ratio serves as a key indicator of whether the material exhibits compressive ductility or brittle fracture. Multispectral image analysis from EDS elemental maps, …

    tamu Repository record for Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations (opens in a new tab) Embargoed until 2027-08-01

  16. Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations

    … methodologies. Mapping scratch and vertical hardness profiles along the reaction depth revealed that the rate of change in this ratio serves as a key indicator of whether the material exhibits compressive ductility or brittle fracture. Multispectral image analysis from EDS elemental maps, …

    tamu Repository record for Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations (opens in a new tab) Embargoed until 2027-08-01

  17. Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations

    … methodologies. Mapping scratch and vertical hardness profiles along the reaction depth revealed that the rate of change in this ratio serves as a key indicator of whether the material exhibits compressive ductility or brittle fracture. Multispectral image analysis from EDS elemental maps, …

    tamu Repository record for Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations (opens in a new tab) Embargoed until 2027-08-01

  18. Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations

    … methodologies. Mapping scratch and vertical hardness profiles along the reaction depth revealed that the rate of change in this ratio serves as a key indicator of whether the material exhibits compressive ductility or brittle fracture. Multispectral image analysis from EDS elemental maps, …

    tamu Repository record for Multiscale Characterization of Rock-Fluid Interactions: Linking Microscale Fracture to Nanoscale Chemo-Mechanical Transformations (opens in a new tab) Embargoed until 2027-08-01

  19. Nitriding of aluminium-containing steels

    … and carbon replicas, optical microscopy and microhardness measurements. A potentiostatic etching method was used for the extraction of carbides and nitrides, and those phases which were present were determined by X-ray diffraction and X-ray microanalysis. In addition to the known nitride phases, …

    whiterose Download PDF for Nitriding of aluminium-containing steels (opens in a new tab)

  20. Nanoscratch testing - fundamentals of wear

    … nanoscratch techniques. Nanoindentation measures hardness and elastic modulus at the nanoscale, while nanoscratch testing simulates sliding contact and material removal. Atomic Force Microscopy (AFM) is used to study how pile-up formation changes with normal load and how wear tracks develop with …

    oxford Repository record for Nanoscratch testing - fundamentals of wear (opens in a new tab)

Page 1 of 2