Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 91 for “"Hardness tests"”.
-
Hardness tests on irradiated pressure vessel steel
<p>http://www.worldcat.org/oclc/7034820</p>
-
Experimental and Numerical Modelling of Gasket Materials and Property Correlation
… program has been developed to study the shore hardness testing of rubber materials principally used for gasket applications. The correlation between shore hardness and linear elastic and hyperelastic properties has been systematically investigated. A detailed FE model of the shore A hardness …
-
The effect of small additions of titanium on the incubation period of isothermally transformed zirconium-niobium alloy.
… at constant temperature, by making micro-hardness tests, by examining specimens metallographically and by employing X-ray diffraction methods. It was found that the effect of increasing the amount of titanium was to lengthen the incubation period. According to the electrical resistance …
-
The corrosion behaviour of aluminium alloy B206 in seawater
… morphology before and after the electrochemical tests. Heat treatment has been performed on the as-received samples using RRA and T7 heat treatment techniques to compare the corrosion behaviour of the former with the latter using electrochemical techniques and image analysis. Lastly, hardness …
-
Material validation and part authentication process using hardness indentations with robotic arm implementation
… In this work, a process is presented that uses hardness testing and the resulting indentations to simultaneously provide three critical functions for part validation and authentication: (i) material property validation and material property mapping achieved by administering multiple hardness …
-
Understanding corn endosperm morphology through solvent and heat treatments
… of r > 0.8) with laboratory abrasive/hardness tests. Resistance to abrasion, hardness, percent floaters, and protein content were moderately predictive (r > 0.6) of moisture absorption during alkaline cooling while breakage susceptibility somewhat predicted dry matter loss (r = 0.6). …
-
Nanocomposite of ZrO2/Polymer Thin-Film Coatings by the Ionically Self-Assembled Monolayer Technique
… characterized by adhesion, abrasion, and nano-hardness tests. It was shown that an important distinction of this novel technique over conventional coating processes is the fabrication of excellent molecular-level uniform films with precise control of film thickness at the à ngström-level at …
-
The effect of aging treatment on the microstructure and properties of copper-precipitation strengthened HSLA steel
… characterization while tensile, Charpy, and hardness tests are relied upon for the mechanical properties. The microstructure and mechanical characteristics of HSLA- 100 after aging at several different temperatures was correlated. A high ductility and the minimum 100 csi yield strength was …
-
The effect of primary silicon refinement on the microstructure and properties of hypereutectic aluminum-silicon alloys.
… studied by means of metallographic observations, hardness tests and a quantitative determination of the interparticle spacing for the primary silicon. A mechanism has been proposed to explain the observed coarsening of the eutectic which accompanies primary silicon refinement, and the combined …
-
Hopper Railcars: A Preliminary Study on the Use of Fibre Reinforced Polymers in Structural Components
… through a series of metallographic, tensile, and hardness tests. A 6.4% potential weight reduction in the structural weight of a hopper railcar was achieved by using aramid/epoxy, fabricated using vacuum-assisted resin transfer moulding, as a substitute material for the low-carbon steel in the …
-
Effect of heat treatment and batch-to-batch material variations on microstructure of C38 steel
… batches were light optical microscopy as well as hardness testing. Some differences were observed between the batches before heat treatment but after the heat treatment had been performed there were no differences that could be discerned with an optical microscopy. The hardness tests showed a very …
-
A study of sliding wear behavior of heat treated 1060 steel with pure rolling pre-conditioning
… the whole experiment. Results from wear rate, hardness tests and scanning electronic microscope (SEM) presented increasing wear rate, hardened microstructures and smaller lamella spacing as duration of pure rolling increased.
-
Plasticized lignin-PVC blends for flooring
… elongation at break, as well as impact and hardness tests. In the meantime, the most suitable plasticizer for the specific formulation is determined. The economic advantage is also evaluated.
-
Recovery and recrystallization behaviour of AA5754 and IF-Boron steel during annealing
… parameters are determined from isothermal tests. Isothermal annealing models are developed and validated against data obtained from continuous heating experiments. Experimentally, tensile and hardness tests are carried out in conjunction with quantitative metallography to quantify the …
-
The isothermal deformation of nickel aluminum bronze in relation to friction stir processing
… for subsequent optical microscopy, tensile, & hardness tests. All results were then compared to similar data collected from previous works completed here at Naval Postgraduate School and with other DARPA FSP program participants. During the course of this work correlations were drawn between …
-
Estudo das ligas titânio-zircônio resultantes do processo de fundição plasma-skull para aplicações como biomateriais
… system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer …
-
New scan strategy for Electron Beam Melting: Process window and microstructure evolution
… and spot times. In addition, complementary Hardness tests were performed to gain a basic understanding of the mechanical proper-ties of the produced specimens. As a main result of this thesis, a process window for an EBM point melt strategy is proposed leading to dense specimens showing …
-
Physical Analysis of Worn Surfaces Formed Under Extreme Pressure Lubrication Conditions
… used on taper sections (micro-indentation hardness tests and etching)to observe the structures formed below the wear scars in the base metal. These techniques have been applied to specimens worn under varying loads with two groups of additives (three disulphides and two zine …
-
Button Welding for Structural Steel Connections
… Essentially, this included a series of shear tests with all joints being made at 208 volts input to the equipment utilizing ¼ inch thick material. Two other series of tests with 230 volts input were also conducted utilizing 3/16 inch and ¼ inch thick material. Riveted joints in like material …
-
X-ray analysis of the time-softening property of a lead tin alloy
… property itself by means of series of hardness tests to determine the degree of change and the time required for its accomplishment; (2) a search for x-ray evidence of possible precipitation which might be apparent as a change in the lattice constant of the crystal; and (3) conductivity …
Page 1 of 5