Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 209 for “"Hardware-In-The-Loop (HIL)"”.

  1. Wide Area Damping Control to Improve Transient Stability and Hardware-In-the-Loop (HIL) Implementation

    <p>In this dissertation, the impacts of WADCs on system transient stability are investigated, including system separation prevention under large disturbances and tie-line power transfer limit enhancement with consideration of a three-phase fault on one of the two tie-lines. The full Saudi power …

    utk-theses Repository record for Wide Area Damping Control to Improve Transient Stability and Hardware-In-the-Loop (HIL) Implementation (opens in a new tab)

  2. Desenvolvimento de uma plataforma para validação de controle de conversores em microrredes usando hardware-in-the-loop (HIL)

    … reais com STRs ́e chamado de Controller Hardware-in-the- loop (C-HIL), sendo uma t ́ecnica eficiente no teste de controladores, considerando a possibilidade de simula ̧c ̃ao destes sob diferentes metodologias e cen ́arios. Portanto, este trabalho prop ̃oe o desenvolvimento de uma …

    brazil-ufpe Repository record for Desenvolvimento de uma plataforma para validação de controle de conversores em microrredes usando hardware-in-the-loop (HIL) (opens in a new tab)

  3. HIL simulace elektronické škrticí klapky

    Tato práce se zabývá Hardware in the Loop (HIL) simulací elektronické škrticí klapky. V následujícím textu je odvozen její matematický model pro různé varianty tření a dorazů. Parametry modelu byly získány měřením na reálné klapce. Dále se práce zaměřuje na návrh vhodného řídicího algoritmu, jenž …

    brno-tech Repository record for HIL simulace elektronické škrticí klapky (opens in a new tab)

  4. Thermal modeling of permanent magnet synchronous motor and inverter

    The purpose of my thesis is to establish a simple thermal model for a Parker GVM 210-150P motor and a SEVCON Gen4 Size8 inverter. These models give temperature variations of critical components in the motor and the inverter. My thesis will help Georgia Tech's EcoCAR-3 team in understanding the …

    gatech Repository record for Thermal modeling of permanent magnet synchronous motor and inverter (opens in a new tab)

  5. Hardware model buzení synchronního stroje

    … proud 20 A, včetně návrhu napájecích obvodů a integrace externí kapacity pro stabilizaci meziobvodu. Funkčnost modelu je verifikována metodou Hardware-in-the-Loop (HIL) s využitím testovacího zařízení OMICRON CMC 500, které v reálném čase emuluje chování generátoru a přilehlé elektrizační …

    brno-tech Repository record for Hardware model buzení synchronního stroje (opens in a new tab)

  6. Fast Running 1D model of a heavy-duty diesel engine

    This thesis deals with creation of one-dimensional (1D) Fast Running Model (FRM) for a heavy-duty diesel engine for the purpose of Hardware-in-the Loop (HiL) virtual testing. The FRM was created from a detailed model of a Volvo Penta D13 engine. Investigation of the effects of different calibration …

    chalmers Repository record for Fast Running 1D model of a heavy-duty diesel engine (opens in a new tab)

  7. HIL simulace řízení elektrárny s koordinovanou regulací činného a jalového výkonu

    … Power Manager (PPM). Aplikace zajišťuje koordinované řízení činného a jalového výkonu, prevenci blackoutů pomocí prioritního rychlého odhazování zátěže (Fast Load Shedding), management zátěže, řízení generátorů a synchronizační funkce. Pro testování bylo vytvořeno simulační prostředí …

    brno-tech Repository record for HIL simulace řízení elektrárny s koordinovanou regulací činného a jalového výkonu (opens in a new tab)

  8. Vývoj nestabilního balancujícího vozidla s využitím nástroje Model Based Design

    … systém nejprve pomocí simulací, poté v režimu Hardware-in-the-Loop (HIL) a nakonec i na reálném vozidle. Práce porovnává různé přístupy k modelování systému (white-box, grey-box a black-box) a testuje několik regulačních strategií (PID, SMC, LQR a MPC). Na základě výsledků simulací a …

    brno-tech Repository record for Vývoj nestabilního balancujícího vozidla s využitím nástroje Model Based Design (opens in a new tab)

  9. Autonomous landing system for a UAV

    This thesis is part of an ongoing research conducted at the Naval Postgraduate School to achieve the autonomous shipboard landing of Unmanned Aerial Vehicles (UAV). Two main problems are addressed in this thesis. The first is to establish communication between the UAV's ground station and the …

    nps Repository record for Autonomous landing system for a UAV (opens in a new tab)

  10. SAE Level 2 ADAS - Controller Design for UW EcoCAR

    This work focuses on building a supervisory controller for the UW EcoCAR to incorporate SAE level 2 autonomy features. It comprises Adaptive Cruise Control (ACC), Automatic Emergency Braking (AEB) and Steering Assistance. It uses a separate controller for Velocity Tracking and Distance Tracking. A …

    washington Repository record for SAE Level 2 ADAS - Controller Design for UW EcoCAR (opens in a new tab)

  11. Development of Hardware-In-the-Loop Simulation System for Hybrid Electric Vehicle Study

    The development of embedded control systems for a Hybrid Electric Vehicle (HEV) is a challenging task due to the multidisciplinary nature of HEV powertrain and its complex structures. Hardware-In-the-Loop (HIL) simulation provides an open and convenient environment for the modeling, prototyping, …

    mtu Repository record for Development of Hardware-In-the-Loop Simulation System for Hybrid Electric Vehicle Study (opens in a new tab)

  12. Real-time CAN bus anomaly detection for agricultural vehicles: Testbed implementation and dataset development

    SAE J1939 CAN bus networks, widely used in agricultural and industrial machinery, lack built-in security measures like authentication and encryption, making them vulnerable to Denial-of-Service (DoS), Spoofing, and Fuzzing attacks. With the rise of connectivity in modern vehicles (e.g., telematics, …

    iastate Repository record for Real-time CAN bus anomaly detection for agricultural vehicles: Testbed implementation and dataset development (opens in a new tab)

  13. Využití FPGA kitu Atlys pro Hardware-in-the-Loop simulace a automatické generování kódu

    Práce se zabývá návrhem a implementací hardware-in-the-loop (HIL) testovacího systému na základě FPGA kitu Atlys s cílem umožnit nasazení modelu ze Simulinku na FPGA a využít jej jako simulátor pracující v reálném čase pro testování řídicích jednotek. Po teoretické části věnované architektuře FPGA, …

    brno-tech Repository record for Využití FPGA kitu Atlys pro Hardware-in-the-Loop simulace a automatické generování kódu (opens in a new tab)

  14. Advancements in resonant and current source gate driving techniques for fast switching Wide Band Gap (WBG) Metal Oxide Field Effect Transistors (MOSFETs)

    Traditional methods for driving the Metal Oxide Field Effect Transistor, like the Voltage Source Gate Driver (VSGD), prove to be inefficient for high-frequency operation, especially in applications where Wide-Bandgap devices are used. This is because of their losses and poor control over the …

    uoit Repository record for Advancements in resonant and current source gate driving techniques for fast switching Wide Band Gap (WBG) Metal Oxide Field Effect Transistors (MOSFETs) (opens in a new tab)

  15. MODELING AND HARDWARE-IN-THE-LOOP SIMULATION OF POWER-SPLIT HYBRID ELECTRIC VEHICLES

    Conventional vehicles are creating pollution problems, global warming and the extinction of high density fuels. To address these problems, automotive companies and universities are researching on hybrid electric vehicles where two different power devices are used to propel a vehicle. This research …

    mtu Repository record for MODELING AND HARDWARE-IN-THE-LOOP SIMULATION OF POWER-SPLIT HYBRID ELECTRIC VEHICLES (opens in a new tab)

  16. Computer modeling of captive-carry missile simulator experiments

    The increasing number, diversity and sophistication of anti-ship cruise missiles around the world in the past thirty years have led to sophisticated countermeasures. The Naval Research Laboratory has developed hardware in the loop (HIL) missile simulator technology to assess the effectiveness of …

    nps Repository record for Computer modeling of captive-carry missile simulator experiments (opens in a new tab)

  17. Development and implementation of new control law for vision based target tracking system onboard small Unmanned Aerial Vehicles

    A new control law is being developed and implemented for the Vision Based Target Tracking (VBTT) system onboard a small unmanned aerial vehicle (SUAV). The new control law allows for coordinated SUAV guidance and vision-based target tracking of stationary and moving targets in the presence of …

    nps Repository record for Development and implementation of new control law for vision based target tracking system onboard small Unmanned Aerial Vehicles (opens in a new tab)

  18. Optimized Pulse Pattern Control Strategy Investigation on Signal Level Hardware in the Loop

    Abstract Electric vehicles (EVs) are gaining popularity worldwide due to their low cost of use and sustainability. Key components of the EV drivetrain include an inverter and a permanent magnet synchronous machine (PMSM). To better improve their efficiency, optimized pulse pattern (OPP) can be …

    chalmers Repository record for Optimized Pulse Pattern Control Strategy Investigation on Signal Level Hardware in the Loop (opens in a new tab)

  19. Designing an Intrusion Detection Scheme for Industrial Adjustable Speed Drive Systems

    … proposes a detection method for cyber intrusions on sensor measurement of an adjustable speed drive (ASD) system controlling a critical process and a grid-following PV inverter system. The proposed detection method is injecting a random private low-amplitude signal with a zero mean …

    tamu Repository record for Designing an Intrusion Detection Scheme for Industrial Adjustable Speed Drive Systems (opens in a new tab)

  20. Cyber Physical Emulation of Power Grids: Co-Simulation of EXata CPS and HYPERSIM

    This thesis explores the use of cyber-physical emulation of power grids to analyze the impact of different types of cyberattacks. It outlines the co-simulation process of HYPERSIM and EXata CPS within the OPAL-RT real-time digital simulator, demonstrating various cyberattacks on two power system …

    unm Repository record for Cyber Physical Emulation of Power Grids: Co-Simulation of EXata CPS and HYPERSIM (opens in a new tab)

Page 1 of 11