Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 228 for “"Heat Sinks"”.
-
Manifold microchannel heat sinks for cooling concentrator photovoltaics
… the performance of manifold microchannel heat sinks for cooling highly concentrated photovoltaics. The proposed innovations reduce thermal resistance and parasitic pumping losses, which also serves to curb the consumption of power-hungry data centres.The research findings coalesce into two …
-
INVESTIGATION OF POWDER INJECTION MOULDED OBLIQUE FIN HEAT SINKS
… present work attempts to study the fluid flow and heat transfer characteristics of PIM oblique finned microchannel heat sink both numerically and experimentally. Experimental results such as thermal resistance and pressure drop have been well validated with ANSYS FLUENT simulations. Hot spots are …
-
Surface-modified silicon heat sinks for IC thermal management
… chips have received much more attention today. Heat sinks are a key component for device cooling technology. The project will focus on design, fabricate and characterise silicon micro fin/pin fin heat sinks that would be able to improve the cooling performance of the current available heat …
-
Enhancement of the cooling performance of microchannel heat sinks
… the cooling performance of a micro pin fin heat sink are investigated and their effect to improve its cooling efficiency are examined. The employment of nanoparticles and nano-encapsulated phase change materials (NEPCM) suspensions, as advanced coolant slurries, are the first and second …
-
Optimization of Heat Sinks in a Range of Configurations.
In this study, different heatsink geometries used for electronic cooling are studied and compared to each other to determine the most efficient. The goal is to optimize heat transfer of the heat sinks studied in a range of configuration based on fin geometry. Heat sinks are thermal conductive …
-
Extended surface heat sinks for electronic components: a computer optimization.
Heat sinks consisting of individual fins and arrays of fins are used extensively throughout the Navy and industry. The fins serve to increase the surface area thorough which heat is transferred to the surrounding environment by natural convection. Extended surfaces or fins are commonly found on …
-
ENHANCED AIR SIDE THERMAL TRANSPORT FOR HIGH EFFICIENCY HEAT SINKS
… tailoring was performed both at fin level and at heat sink level. Two enhanced heat sink fin designs were proposed and studied with numerical and experimental analysis. The flow mechanisms contributing to or compromising the thermal and hydraulic performances were identified. The air-cooled …
-
TOPOLOGY OPTIMIZATION OF FORCED CONVECTIVE MINI/MICRO SCALE HEAT SINKS
… are widely seen in industry, for example, heat sinks, heat exchangers, solar thermal collectors, etc. The traditional design method is mostly dependent on experience of engineers or researchers. In current study, topology optimization, a numerical design method, is developed and applied to …
-
Additive Manufacturing Methods to Make High-Heat-Flux Heat Sinks
… pin fins and channels were deposited directly on heat-generating surfaces using thermal spray deposition. Tests were done by cooling a 1 cm2 copper surface with a surface heat flux of 50-450 W/cm2. The thermal resistance of the heater surfaces decreased resulting in heat transfer coefficients up …
-
Characterization of Manifold Microchannel Heat Sinks During Two-Phase Operation
High-heat-flux removal is necessary for next-generation microelectronic systems to operate more reliably and efficiently. The direct embedding of microchannel heat sinks into the heated substrate serves to reduce the parasitic thermal resistances due to contact and conduction resistances typically …
-
Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices
A stacked microchannel heat sink was developed to provide efficient cooling for microelectronics devices at a relatively low pressure drop while maintaining chip temperature uniformity. Microfabrication techniques were employed to fabricate the stacked microchannel structure, and experiments were …
-
Serpentine minichannel liquid-cooled heat sinks for electronics cooling applications
… is leading to an inexorable rise in the heat dissipation that must be achieved in order to preserve reliability and performance. Hence, improving the thermal management of electronic devices is a crucial goal for future generations of electronic systems. Therefore, a complementary …
-
Design Optimisation and Analysis of Heat Sinks for Electronic Cooling
… devices create power dissipation in the form of heat created as a by-product, which can have a negative effect on their performance, certain temperature limit constraints are required for almost all these applications to work within suitable conditions. That is, these engineering devices might …
-
Optimization of Heat Sinks with Flow Bypass Using Entropy Generation Minimization
… enhanced through the use of extended surfaces or heat sinks that reduce boundary resistance allowing heat generating devices to operate at lower temperatures, thereby improving reliability. Unfortunately, the clearance zones or bypass regions surrounding the heat sink, channel some of the cooling …
-
Liquid-Cooled Heat Sinks Fabricated Using Wire-Arc Additive Manufacturing Techniques
Liquid-cooled heat sinks are widely used for the thermal management of electronic devices. Manufacturing limitations often restrict their designs in commercial applications to simple configurations,such as a copper tube embedded in an aluminum plate or minichannels with solid parallel fins. Despite …
-
Numerical Investigation and Optimization of Pin Fins in Micro Heat Sinks
… Therefore, for the past few decades, high heat flux removing micro heat sinks are investigated in terms of heat transfer effectiveness. This study generally concentrates on improving the passive heat transfer techniques. Micro heat sinks used in experiments are fabricated using MEMS …
Page 1 of 12