Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Heat engineering"”.

  1. Dryer modeling and optimization

    The two major objectives of this work are to: 1. develop a detailed, packed bed, continuous, conveyor-belt, direct-fired dryer simulator, and 2. optimize operating parameters (drying air velocity and drying air temperature) in order to minimize production cost and meet production specifications …

    ttu Repository record for Dryer modeling and optimization (opens in a new tab)

  2. Use of PV/T panels to meet the building loads of light commercialized buildings

    … simultaneously electric power and low-grade heat energy by absorbing the solar energy striking on its surface. A simple mathematical model is developed to estimate the electric power and heat energy gained by the PV/T panel. A water-to-water heat pump is employed that operates by absorbing …

    utc Repository record for Use of PV/T panels to meet the building loads of light commercialized buildings (opens in a new tab)

  3. Thermal properties of porous media: with applications in multi-layer ground-coupled heat pumps

    … low thermal conductivity material controls the heat conduction process in the two-material mixture. This mixed thermal conductivity does not obey any simple mixing law. The concepts of basic and bypassing heat transfer elements were introduced to explain the heat transfer mechanism and a …

    ttu Repository record for Thermal properties of porous media: with applications in multi-layer ground-coupled heat pumps (opens in a new tab)

  4. Development of Improved Mathematical Models for the Design and Control of Gas-Fired Furnaces

    … Generally in these systems the dominant mode of heat transfer is radiation so that prediction of the thermal performance requires accurate calculation of the radiative transfer. This can be achieved by using the zone method in which the furnace enclosure is subdivided into a number of zones. …

    southwales Repository record for Development of Improved Mathematical Models for the Design and Control of Gas-Fired Furnaces (opens in a new tab) Download PDF for Development of Improved Mathematical Models for the Design and Control of Gas-Fired Furnaces (opens in a new tab)

  5. Hydrocatalysis: a new energy paradigm for the 21st century

    … purports to offer commercially viable and useful heat generation via a previously unrecognized natural phenomenon - the catalytic reduction of the hydrogen atom to a lower energy state. A review of this experimenter's laboratory data conducted as part of this research as well as that of others is …

    rowan Repository record for Hydrocatalysis: a new energy paradigm for the 21st century (opens in a new tab)

  6. Unsteady surface heat flux and temperature measurements

    A fast response thin-film heat flux sensor was used to measure the time-resolved surface heat flux and temperature from a turbulent combustion flame impinging on a surface. Using the analytical semi-infinite conduction model, the unsteady surface heat flux was calculated from the transient …

    vt Repository record for Unsteady surface heat flux and temperature measurements (opens in a new tab)

  7. Sensitivity analysis and simulations of surface heating for hypersonic cavity flows

    … (L/H) ratios of 0.17, 5, 15, and 30. The surface heating is found to have a strong sensitivity to freestream Reynolds numbers and some sensitivity to a change in the wall temperature. The cavity flow results are compared to Nestler et al.’s experimental data and Holifield’s CFD results. The …

    utc Repository record for Sensitivity analysis and simulations of surface heating for hypersonic cavity flows (opens in a new tab)

  8. A Numerical Investigation of a Thermodielectric Power Generation System

    … energy conversion technology that converts heat directly into high voltage direct current. It requires dielectric (i.e., capacitive) materials whose charge storing capabilities are a function of temperature. This property is exploited by heating these materials after they are charged; as …

    gatech Repository record for A Numerical Investigation of a Thermodielectric Power Generation System (opens in a new tab)

  9. Reduced-Order Modeling of Multiscale Turbulent Convection: Application to Data Center Thermal Management

    … modeling and analysis of complex fluid flow and heat transfer processes across several decades of length scales. Conventional computational fluid dynamics and heat transfer techniques for such systems are severely limited as a design tool because their large model sizes render parameter …

    gatech Repository record for Reduced-Order Modeling of Multiscale Turbulent Convection: Application to Data Center Thermal Management (opens in a new tab)

  10. Experimentally validated multiscale thermal modeling of electronic cabinets

    … multiple length scales of interest and modes of heat transfer are simultaneously present. A steady reduced order thermal modeling framework for electronic cabinets was developed to provide an efficient method to model thermal transport across multiple length scales. This methodology takes …

    gatech Repository record for Experimentally validated multiscale thermal modeling of electronic cabinets (opens in a new tab)

  11. An Approach for the Robust Design of Data Center Server Cabinets

    … flow regimes encountered in many thermal-fluid engineering applications have proven resistant to the effective application of systematic design because of the computational expense of model evaluation and the inherent variability of turbulent systems. In this thesis the integration of the Proper …

    gatech Repository record for An Approach for the Robust Design of Data Center Server Cabinets (opens in a new tab)

  12. Multi-Scale Thermal Modeling Methodology for High Power-Electronic Cabinets

    … and analysis of complex turbulent fluid flow and heat transfer processes across several decades of length scales. In this thesis, a methodology for thermal modeling of complex PCM cabinets used in naval applications is offered. High fidelity computational fluid dynamics and heat transfer (CFD/HT) …

    gatech Repository record for Multi-Scale Thermal Modeling Methodology for High Power-Electronic Cabinets (opens in a new tab)

  13. Supercritical CO2 Heat Transfer Study Near Critical Point in a Heated Circular Pipe

    … technology to produce electricity from various heat sources. Apart from power cycles, sCO2 can also be used as coolant in centralized cooling system and stand-alone cooling device. However, lack of accurate predication tools such as heat transfer coefficient correlations and insufficient …

    ucf Repository record for Supercritical CO2 Heat Transfer Study Near Critical Point in a Heated Circular Pipe (opens in a new tab)

Page 1 of 2