Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Heat exchanger model"”.

  1. DEVELOPMENT OF AN ADVANCED HEAT EXCHANGER MODEL FOR STEADY STATE AND FROSTING CONDITIONS

    Air-to-refrigerant fin-and-tube heat exchangers are a key component in the heating, air conditioning and refrigeration industry. Considering their dominance, the industry has focused immensely on employing computer modeling in their design and development. Recently, advances in manufacturing …

    maryland Repository record for DEVELOPMENT OF AN ADVANCED HEAT EXCHANGER MODEL FOR STEADY STATE AND FROSTING CONDITIONS (opens in a new tab)

  2. Coupled Design Optimization of Compact Heat Exchangers in Aviation. A design study using a generalized heat exchanger model, computational fluid dynamics and Bayesian optimization

    … in the integration of high-performance, compact heat exchangers. As the European Union aims to achieve net-zero emissions by 2050, hydrogen-powered gas turbine engines are a promising solution. Future civil and military engines will face increased thermal loads, necessitating the integration of …

    chalmers Repository record for Coupled Design Optimization of Compact Heat Exchangers in Aviation. A design study using a generalized heat exchanger model, computational fluid dynamics and Bayesian optimization (opens in a new tab)

  3. Performance Mapping and Life-Cycle Cost Modeling for Heat Exchanger Geometry Optimization in Vapor Compression Chillers

    … system requirements. An optimization study of heat exchanger geometries within a given chiller configuration is proposed to enable the economic comparison between different configurations. The heat exchangers will be optimized to meet the system requirements while minimizing the life cycle cost …

    tamu Repository record for Performance Mapping and Life-Cycle Cost Modeling for Heat Exchanger Geometry Optimization in Vapor Compression Chillers (opens in a new tab)

  4. Pre-sizing of cooling systems for hybridelectric aircraft. Knowledge based design tool development

    … Besides sizing, it provides estimations of heat transfer, cooling drag, weight, and coolant parameters for a ram-air liquid-cooled system based on component models of various fidelity. The core of the tool consists of a one-dimensional flow solver and an integral compact heat-exchanger model …

    chalmers Repository record for Pre-sizing of cooling systems for hybridelectric aircraft. Knowledge based design tool development (opens in a new tab)

  5. TRANSIENT MODELING OF TWO-STAGE AND VARIABLE REFRIGERANT FLOW VAPOR COMPRESSION SYSTEMS WITH FROSTING AND DEFROSTING

    … thesis presents the development of an advanced modeling framework for the transient simulation of vapor compression systems. This framework contains a wide range of components and its modular nature enables an arbitrary cycle configuration to be analyzed. One of the highlights of this framework …

    maryland Repository record for TRANSIENT MODELING OF TWO-STAGE AND VARIABLE REFRIGERANT FLOW VAPOR COMPRESSION SYSTEMS WITH FROSTING AND DEFROSTING (opens in a new tab)

  6. An Investigation Into the Level of Fidelity Required to Model Heat Exchangers of a Heat Recovery Steam Generator

    Process modelling has traditionally been used in the design and development of Combined Cycle Gas Turbine power stations. In recent years it has been applied across the complete process lifecycle, from initial concept testing, through design, development, and operation. In the operation of these …

    auckland-tech Repository record for An Investigation Into the Level of Fidelity Required to Model Heat Exchangers of a Heat Recovery Steam Generator (opens in a new tab)

  7. MODCONV: A Computer Code to Predict the Local Velocities and Temperatures Inside a Moderator

    … the free convection equations set can be used to model a mixed convection problem. Purely explicit, donor cell finite differencing scheme is used. A heat exchanger model using NTU method is also included to give a realistic inflow temperature for the moderator. The heat load distribution is …

    mcmaster Repository record for MODCONV: A Computer Code to Predict the Local Velocities and Temperatures Inside a Moderator (opens in a new tab)

  8. Numerical analysis of the thermal performance of vapour compression heat pump heat exchanger using Python and computational fluids dynamics (CFD)

    Numerical analysis on fin and tube heat exchangers contributes towards the implementation of energy-efficient technologies in the industrial and building sectors. Fin and tube heat exchangers are found in various mechanical applications including heating, ventilation, and air conditioning (HVAC) …

    cape-town Repository record for Numerical analysis of the thermal performance of vapour compression heat pump heat exchanger using Python and computational fluids dynamics (CFD) (opens in a new tab)

  9. Second law analysis of a liquid cooled battery thermal management system for hybrid and electric vehicles

    … to hybrid and electric vehicles. The design is modeled as part of the UOIT EcoCAR. The predominant focus of this indirect liquid cooled system is the entropy generation in each of the components within the system, as well as a total system analysis. Four main components of the system are the …

    uoit Repository record for Second law analysis of a liquid cooled battery thermal management system for hybrid and electric vehicles (opens in a new tab)

  10. An Experimental Study on Flow-Induced Vibration of a Single and Adjacent Tubes Within a Model Helical Coil Heat Exchanger

    The helical coil heat exchanger (HCHX) is a geometrically complex tube and shell heat exchanger design that is preferred over straight tube bundles due to its increase in heat transfer efficiency, compact design, and thermal stress flexibility. Previous studies have shown prominent flow phenomena …

    tamu Repository record for An Experimental Study on Flow-Induced Vibration of a Single and Adjacent Tubes Within a Model Helical Coil Heat Exchanger (opens in a new tab)

  11. Implementation and validation of a Ground Source Heat Pump model in MATLAB

    … is the implementation of a simple Ground-Source Heat Pump (GSHP) system model in MATLAB. The program is able to run multi-year simulations for a given building hourly load profile, with an hourly time step. The GSHP system, including borehole heat exchanger geometry, borehole field configuration, …

    chalmers Repository record for Implementation and validation of a Ground Source Heat Pump model in MATLAB (opens in a new tab)

  12. Análisis y modelado de una instalación geotérmica para climatización de un conjunto de oficinas

    [EN] The use of ground source heat pump systems has spread during the last years. When designing, studying and optimizing this kind of systems, models are used, more or less detailed, which allow predicting the behavior of the system within the application minimum requirements. The installation …

    upv Repository record for Análisis y modelado de una instalación geotérmica para climatización de un conjunto de oficinas (opens in a new tab)

  13. Modellering och optimering av spillvärmesystem på Shell Raffinaderi AB för ökad fjärrvärmeleverans

    … optimisation can increase low temperature waste heat recovery from Shell Refinery in Gothenburg. The waste heat recovery system at Shell delivers heat to the district heating network of Gothenburg. The waste heat comes from cooling and condensation of process streams. The optimisation is done by …

    chalmers Repository record for Modellering och optimering av spillvärmesystem på Shell Raffinaderi AB för ökad fjärrvärmeleverans (opens in a new tab)

  14. Computer Aided Simulation of a Heating, Ventilating, and Air Conditioning System in a Building

    … was used to simulate the building and its heating, ventilating, and air conditioning (HVAC) plant in order to understand the building's high annual energy resource consumption rate, and to devise ways to overcome it. The main goal was to assess and propose energy conservation improvements …

    odu Repository record for Computer Aided Simulation of a Heating, Ventilating, and Air Conditioning System in a Building (opens in a new tab)

  15. Underhood Thermal Simulation

    … with the whole underhood thermal simulation model. The integrated simulation model is incorporated with a scope to find hot air recirculation and engine compartment backpressure, which plays a pivotal role in estimating the cooling system's performance in the coach bus. In this work, …

    chalmers Repository record for Underhood Thermal Simulation (opens in a new tab)

  16. Thermoelectric System Modeling and Design

    Thermoelectric generators (TEGs) convert heat to electricity by way of the Seebeck effect. TEGs have no moving parts and are environmentally friendly and can be implemented with systems to recover waste heat. This work examines complete thermoelectric systems, which include the (TEG) and heat …

    boise Repository record for Thermoelectric System Modeling and Design (opens in a new tab)

  17. Local shell-side coefficients in shell and tube exchanges the use of a mass transfer technique

    … in segmentally baffled shell and tube heat exchangers. Corresponding heat transfer data are predicted through the Chilton and Colburn heat and mass transfer analogy. Mass transfer coefficients were measured for baffle spacing lengths of individual tubes in an internal baffle …

    aston Download PDF for Local shell-side coefficients in shell and tube exchanges the use of a mass transfer technique (opens in a new tab)

  18. Development of detailed prime mover models and distributed generation for an on-board naval power system trainer

    … with all the physical parts of the power system modeled in software that communicate to the control software, HMI software, and training software. Previous simulation models of the prime movers created in MATLAB® Simulink® (developed at Woodward, Inc. for control code testing purposes) were …

    colostate Repository record for Development of detailed prime mover models and distributed generation for an on-board naval power system trainer (opens in a new tab)

  19. Temperatūros ciklų poveikio raketinio variklio šilumokaičio mechaniniam atsparumui tyrimas /

    … of thermomechanical forces on the rocket engine heat exchanger resistance. Several geometric models of the rocket engine heat exchanger were modeled. Using computer programs capable of performing thermomechanical simulations, and to investigate the properties of the available models, simulations …

    vilnius Repository record for Temperatūros ciklų poveikio raketinio variklio šilumokaičio mechaniniam atsparumui tyrimas / (opens in a new tab)

  20. Modeling an effluent to influent heat exchanger for anaerobic digesters

    … The major energy input in a digester is the heat required to bring influent liquid to design temperature. As digesters are operated at nearly constant volume, effluent flow rate essentially equals influent flow rate and an effluent to influent heat exchanger has great potential for reducing …

    iastate Repository record for Modeling an effluent to influent heat exchanger for anaerobic digesters (opens in a new tab)

Page 1 of 2