Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 108 for “"Heat integration"”.
-
Heat integration across plants in the total site.
… gap, the purpose of this thesis is to discuss heat integration across plants in the "total site". This integration can be accomplished either directly using process streams or indirectly using intermediate fluids. By applying pinch analysis to a system of two plants, it is first shown that the …
-
Heat integration study of a conceptual lignocellulosic ethanol plant
… crops, often sugar canes, sugar beets, corn or wheat and thereby competes with food industry in terms of feed stock and land use. Ethanol from lower value materials, such as lignocellulosic agricultural and forest residues, will most likely not cause the same conflict of interest. Pretreatment …
-
Unified Total Site Heat Integration: Targeting, Optimisation and Network Design
… in New Zealand use 214.3 PJ of process heat, of which approximately 65 % is fossil fuels. Despite increasing energy demands, depleting fossil fuel resources, and pressure to reduce Greenhouse Gas emissions, low grade heat in large-scale processing sites is still not fully utilised. This …
-
Investigation of the opportunity for heat integration at Preemraff Göteborg
… to investigate the option for increased internal heat recovery, thereby decreasing the utility demand. The potential for energy savings has been evaluated using information and stream-data collected at the refinery. The pinch analysis shows that Preemraff Göteborg has a theoretical potential to …
-
Open-Source tools for practical heat integration and utility system evaluation
… of the most effective strategies for reducing heat demand is optimising the design of heat exchanger networks (HENs). While automated synthesis methods like mathematical programming have long promised optimal designs, their industrial adoption remains limited. Key barriers include expensive …
-
Heat Integration opportunities in an Average Scandinavian Integrated Pulp &Paper Mill using Pinch Analysis
… aim of this master thesis was to investigate the heat integration opportunities in a model mill resembling an average Scandinavian fine paper mill. However, the paper machine of the model mill was not modelled on a detail level; therefore data from an existing paper machine (PM2 at Stora Enso …
-
Opportunities for improved heat integration in average Scandinavian kraftliner mills: A pinch analysis of a model mill
… be achieved. One way to save steam is process integration and a tool to find steam saving opportunities is pinch analysis. The method is used in this thesis where a pinch analysis of a modelled average Scandinavian Kraftliner mill has been done. The mill is modelled within the national research …
-
Heat integration between CO2 Capture and Liquefaction and a CHP Plant: Impact on Electricity and District Heating Delivery at Renova’s CHP Plant in Sävenäs
… an installation of CO2 capture to a combined heat and power (CHP) plant may result in a substantial decrease in electricity and district heating (DH) delivery. This thesis evaluates the effects on electricity and DH delivery of an integrated capture and liquefaction plant treating 60% of the …
-
Process integration study of biomass-to-methanol (via gasification) and methanol-to-olefins (MTO) processes in an existing steam cracker plant
… have been evaluated based on the potential for heat integration and the potential to produce high pressure steam. The potential for high pressure steam production is particularly relevant given the loss of high pressure steam production from the cracker furnaces when reducing their capacity. …
-
Multi-Level process integration of heat pumps in a non-continuous processing site
Industrial process heat demands contribute significantly to New Zealand’s greenhouse gas emissions. With a global push towards decarbonization, including New Zealand’s Climate Change Response Amendment Act 2019, there is a need for methods and technologies that can be applied to replace industrial …
-
Modeling, control, and optimization of an industrial austenitization furnace
… consumption of a steel quench hardening (or heat treating) process, currently in operation at an industrial partner, by mathematical modeling, optimization, advanced control, and heat integration. The quench hardening processes consists of heating pre-finished metal parts to a certain …
-
Targeting Power Generation from Waste Heat Streams
… power generation limits from a set of heat source streams. The first procedure takes the form of an algebraic targeting approach commonly applied in process heat integration. This procedure is based on fundamental thermodynamics laws and the Carnot cycle. The procedure allows the …
-
Simultaneous Design, Scheduling and Operation Through Process Integration
… and scheduling with economic, environmental, heat integration and inherently safer design objectives. Specifically, this work introduces a systematic framework and the associated mathematical formulation for simultaneous process design and scheduling while simultaneously addressing economic, …
-
Design and Integration Analysis of Cryogenic Air Separation Unit
… savings annually. CASU technology inherits tight heat integration with approach temperatures of up to ~1oC in the heat exchangers due to refrigeration at very low temperatures. This work is intended to systematically study and analyze the dependence of energy usage of this technology on process …
-
Modelling and optimisation of oxidative desulphurization process for model sulphur compounds and heavy gas oil. Determination of Rate of Reaction and Partition Coefficient via Pilot Plant Experiment; Modelling of Oxidation and Solvent Extraction Processes; Heat Integration of Oxidation Process; Economic Evaluation of the Total Process.
… for large scale operation. Large amount of heating is necessary even to carry out the reaction at 30-40 0C, the recovery of which is very important for maximising the profitability of operation and also to minimise environmental impact by reducing net CO2 release. Here the heat integration …
-
Kinetic Modelling Simulation and Optimal Operation of Trickle Bed Reactor for Hydrotreating of Crude Oil. Kinetic Parameters Estimation of Hydrotreating Reactions in Trickle Bed Reactor (TBR) via Pilot Plant Experiments; Optimal Design and Operation of an Industrial TBR with Heat Integration and Economic Evaluation.
… (HDT) processes, hot effluents can be used to heat other cold process streams. It is noticed that the energy consumption and recovery issues may be ignored for pilot plant experiments while these energies could not be ignored for large scale operations. Here, the heat integration of the HDT …
-
Experimental Investigation of Spray Cooling/Heating of a Near-Isothermal Hydro-Pneumatic Energy Storage System
… experimental investigation of spray cooling/heating of a near-isothermal, scalable, efficient, high density, hydro-pneumatic integrated energy storage system; capable of spray cooling/heating during gas compression/expansion and capable of excess heat integration. The invented Ground-Level …
-
An Itegrated Approach to Water Treatment in Oil and Gas Industry via Thermal Membrane Distillation
… in water treatment. It is driven primarily by heat which creates a vapor-pressure difference across a porous hydrophobic membrane. Hot produced water and excess low-level heat from industrial processes can be integrated with TMD and used to drive it. This transfer of heat also reduces the …
Page 1 of 6