Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Heat shield"”.
-
Ablative heat shield studies for NASA Mars/Earth return entry vehicles
… reusable, would be desirable for the protective heat shield used on Earth entry vehicles. A material for this purpose has been developed that uses silicon dioxide (fused quartz) in a fibrous packed matrix, forming blocks which can behave as a glassy ablator on the surface when subject to very …
-
Quantitative Global Heat-Transfer Measurements using Temperature-Sensitive Paint on a Blunt Body in Hypersonic Flows
… intensity-based temperature-sensitive paint heat-transfer measurement system has been developed for use in the US Air Force Hypervelocity Wind Tunnel No. 9. Several data reduction approaches have been proposed for calculating the convective heat flux from the temperature-sensitive paint …
-
Approximate heat-transfer and wall-temperature calculations for aeroassisted orbital transfer vehicles
… of a method for the calculation of Convective heat-transfer and surface temperatures on heat-shields of Aeroassisted Orbital Transfer Vehicles (AOTVs) in hypersonic flow regimes. Inviscid flowfield solutions are obtained about the aerobraking shield on the AOTVs using axisymmetric Euler's …
-
Development of a heat transfer model of a simplified build environment in electron beam additive manufacturing
In this research, a 3D heat transfer model incorporating cavity radiation was developed in ABAQUS version 2017 to approximate the thermal field within the build environment in an Electron Beam Powder Bed Fusion (EB-PBF) Additive Manufacturing (AM) Process. The build environment, also referred to as …
-
Characterization of the Spallation Phenomenon in Ablative Thermal Protection System Materials Resulting from Arc-Jet Experiments
… protecting spacecraft from the large amounts of heating incurred during atmospheric entry. Ablative thermal protection systems in particular often consist of a carbon fiber matrix impregnated with a polymer resin and use thermal and chemical reactions to decompose the material. Weakening of these …
-
An analysis of the spallation of carbon phenolic ablators
… a process by which pieces of char "pop off" a heat shield, has been investigated as it occurs in carbon-reinforced phenolic ablators. Spallation is shown to be the result of a pressure buildup within the char. This pressure increase results from occlusion of the char and the consequent blockage …
-
Aerothermodynamic Optimization of Earth Entry Blunt Body Heat Shields for Lunar and Mars Return
… the hypersonic aerodynamic and stagnation-point heat transfer performance of Earth entry heat shields for Lunar and Mars return manned missions with entry velocities of 11 and 12.5 km/s respectively. The aerothermodynamic performance of heat shield geometries with lift-to-drag ratios up to 1.0 is …
-
Reaction sintered silicon nitride as a coating for carbon-carbon composites
… carbon-carbon material (RCC) presently used as a heat shield on the space shuttle, and on advanced carbon-carbon (ACC), a later development. On RCC, RSSN showed potential in a 538°C (1000°F) screening test in which silicon carbide coated material exhibits its highest oxidation rate; RSSN afforded …
-
Modeling and Numerical Simulation of the Behavior of Charring Ablators During Atmospheric Re-Entry
… high-temperature effect is the radiative heating from the flow to the body. The most important consequence of high temperatures, from a technological point of view, is the resultant high heat transfer rates to the surface. Thus, in order to protect the vehicle's substructure against the …
-
A Study of the Operating Characteristics of an Adiabatic Calorimeter
… hypersonic flow, rocket propulsion, and re-entry heat shield design require new thermophysical data on heat resistant materials. The present investigation is concerned with the development of a calorimeter which has the capabilities for obtaining specific and latent heat data on these materials in …
-
Analytical and Numerical Modeling of Fluid Flow and Heat Transfer through Open-cell Metal Foam Heat Exchangers
… and numerical investigations of fluid flow and heat transfer through open cell metal foam heat exchangers are presented. Primarily, different representative unit cell approximations, i.e, tetrakaidecahedron, dodecahedron and cubic are discussed. By applying the thermal resistance analogy, a …
-
Design and evaluation of ion source for satellite charge control
… source was configured with a reentrant thin-wall heat shield to reduce heat loss and an experimental thermocouple imbedded in the plug to accurately measure emission temperature. The initial design of the change control device included an extraction grid, deceleration grid, and an electron …
-
Development of Universal Solver for High Enthalpy Flows Through Ablative Materials
… approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical …
-
Multidimensional Modeling of Pyrolysis Gas Transport Inside Orthotropic Charring Ablators
… spacecraft are exposed to enormous aerodynamic heat. To prevent the payload from overheating, charring ablative materials are favored to be applied as the heat shield at the exposing surface of the vehicle. Accurate modeling not only prevents mission failures, but also helps reduce cost. …
-
MULTIDISCIPLINARY OPTIMIZATION OF NON-SPHERICAL, BLUNT-BODY HEAT SHIELDS FOR A PLANETARY ENTRY VEHICLE
… static stability, and stagnation-point heat transfer has been completed to find optimal heat shield geometries for blunt-body planetary entry vehicles. In the parametric study, performance trends have been identified by varying geometric parameters that define a range of cross-sections …
-
Computational Fluid Dynamic Solutions of Optimized Heat Shields Designed for Earth Entry
… fluid dynamic solutions are obtained for heat shields optimized aerothermodynamically using Newtonian impact theory. Aerodynamically, the low-order approach matches computational simulations within 10%. Benchmark Apollo 4 solutions show that predicted heat fluxes under-predict convective …
-
Numerical Simulations of Supersonic/ Hypersonic Flows in Compression Corners and a Hypersonic Flow Study of Atmospheric Entry of Mars Science Laboratory Capsule
… in the study. The surface static pressure, heat transfer rate, and separation bubble in the corner are compared between the simulations and the experiments. Generally, it was found that the SA model’s accuracy begins to falter at the higher corner angles (> 20+ degrees). It was found that …
-
Consistent Chemical Kinetics and Continuum Models for High Temperature Air
… flows create shock waves, which compress and heat the surrounding gas to high-temperatures. Strong shock waves cause dissociation of nitrogen and oxygen molecules. Predicting the extent of dissociation and recombination of atomic species is important since the state of the gas near the vehicle …
-
Assessment of aerocapture-entry trajectories for human Mars exploration
… propulsion system efficiency, entry velocity, or heat shield material. Additionally, results show that aerocapture-entry architectures incur a TPS mass penalty up to 27% relative to direct entry, depending on vehicle. In addition, direct entry avoids needing propellant for in-space maneuvers …
Page 1 of 3